Items 1-24 of 53
- WHITE ROGERS - 25K49A-3 - Valve, gas. 115VAC 0.12 Amp 60Hz.$20.00
- PNEUMADYNE INC - H0-20-2N - Directional Control Valves - Toggle ControlSpecial Price $5.91 Regular Price $7.88Panel Mount Toggle Directional Control Valves 2-WAY NORMALLY CLOSED WITH DETENTED TOGGLE 0-to-125psi -20deg to +160degF Flow rate 8scfm @ 50psi and 17scfm at 125psi Only 4-6oz actuation force on toggle - Sealed rotating base for multidirectional positioning (Not to be used as a rotary union.) ( VALVE 2WNC TOG DET 10-32(F)Elbow ENI ) Only 16mm dia x 52mm OALength. Brass/Nickel/SS Learn More
- ASCO - Automatic Switch Co - HV1744762 - Red Hat - 3-Way Solenoid Valve 15PSI Air, Inert Gas, Water, 1/4"NPT 120VACSpecial Price $48.98 Regular Price $96.50 As low as $42.98
ASCO - Automatic Switch Co - Model - HV1744762 - Red Hat Solenoid.
Small 3-way solenoid operated valve with all three pipe connections located in the body. NEMA Type I Solenoid Enclosure. Valves are equipped with a NEMA Type 4 Watertight Enclosure.
Commercial - General Purpose
Body Design: 3 Way Solenoid Valve
Coil Voltage: 120VAC/60Hz, 110VAC/50Hz
Coil Type: B94, P/N: MP-C-011, 099216-005D, 2 Wire.
Wattage: 10.7 W
Solenoid Enclosure: Watertight
Pressure: 15 PSI Air, Inert Gas & Water.
Material: Brass Valve
Maximum Fluid Temperature: 200 F
Approximate Lead Length: 18"
1/4" PIPE Three-Way Operation: Normally Open & Normally Closed.
Uses Rebuild Kit 174889 D-7240 DS-796
Dimensions: 45x37x91mm High Including Coil.
Coil: 35x40mm Int. 120V 60Hz 10.7W Ind.
Boxed with Instructions - New Old Stock.
A 726048003 CSA
Proudly Made in USALearn More
- TOMCO - 3472R5 - Series 3400 Pneumatic Slim-Flow Quick-Connect Plug Fitting 1/4" Tube 316-SSTSpecial Price $9.98 Regular Price $16.50 As low as $8.49IN STOCK - MORE THAN 100 READY TO SHIP!
TOMCO - 3472R5 - Valved Flareless Tube Plug Fitting
Tomco's precision line of couplers are ideally suited for instrumentation and chemical processing applications.
316 Stainless Steel Construction
Positive roller lock latching mechanism allows 360 degree swivel action
One hand required to connect or disconnect
Smallest possible dimensions with maximum orifice size.
Integral flareless tube port fitting
Temperature range +20F to 400 F
Vacuum Data - connected 29.50 in. Hg
Packaged in factory reusable clear protective plastic tube
Note: Valved plug P/N 3472R5 must be used with valved coupler P/N 3452R5
Made in USA
- HUMPHREY - P5098 - 1.5VDC Oxygen Valve / Manual SwitchSpecial Price $8.98 Regular Price $14.50
- PENN - JOHNSON CONTROLS INC - V46AR-1C - 1-1/2" V46 Series Pressure Actuated Water-Regulating Valve (70-260 PSI)Special Price $169.98 Regular Price $350.00READY TO SHIP - ONLY 1 LEFT IN STOCK!
PENN - JOHNSON CONTROLS INC - V46AR-1C - 1-1/2" V46 Series Pressure Actuated Water-Regulating Valve (70-260 PSI)
The V46 pressure-actuated modulating valves come in two types of control action: direct acting or reverse acting. Direct-acting V46 valves are typically used for regulating refrigerant head pressure in water-cooled condensers. Reverse-acting V46N valves are typically used for bypass service on refrigeration systems and heat pump applications. Commercial V46 valves may be used with standard non-corrosive refrigerants. V46 models are also available for ammonia refrigerant. For applications where the coolant may be corrosive to the valve trim, maritime models are available, which have nickel copper (monel) valve trim.
- No Close Fitting or Sliding Parts in Water Passages Provides robust control in less than ideal conditions
- Corrosion Resistant Material for Parts that Come in Direct Contact with Water Promotes longer valve life
- Accessible Range Spring Allows easy manual flushing, if required
- Take-apart Construction Interior of valves accessible without removing valve from refrigeration system or pumping down
- Pressure-balanced Design Valve maintains consistent setpoint against both gradual and sudden water pressure changes
- Type2 Way
- Connection: Flange
- Connection Size: (In.)1-1/2
- Port (In.): 1-1/2
- Design Pressure: (PSIG)320
- Set Points: 70 to 260
- Application:Head Pressure Control with Non-Corrosive Refrigerants
- For Use With: Non Corrosive Refrigerants
- Repair Kit: STT17A-610R
- Replacement Cartridge: Mfr. Model NumberSEP91A-603R
Factory set to 105#. Commercial service 1/4" SAE flair nut. style 45 30"cap.(762mm) with depressor pin.
New Old StockLearn More
- Burkert - 311F-1/8-F-SS-1/8NPT - 24VDC 1-in 2-out P-B-A$24.95
- WATTS REGULATOR CO - 27-P3 - Pattern Water Strainer. Two Output, Strainer 3/8".Special Price $9.98 Regular Price $16.50
- TRINITY INDUSTRIAL CORP - 71-3200 - Fluid regulator, air operate.$79.00
- PARKER - H1EWXBG3B9000GB - Pneumatic solenoid valve 145PSI$54.88
- HONEYWELL / SKINNER VALVE - 71315SN2VNJ1N0C111P3 - Solenoid, valve. 110/50-120/60.$79.00
- DGI Supply - CTD CompacTorque - VALVE plus Actuator$265.00
- AUTOMATIC SWITCH CO - X8266C69 - VALVE 1/2" (F) PIPE for #2 fuel oil$49.99
- ROSS CONTROL - Y1523C6002 - L-O-X Energy Isolation DeviceSpecial Price $72.50 Regular Price $89.00
- ROSS CONTROL - 2751A4902 - Pneumatic valve. Series 27, type B.$95.00
- POWERS PROCESS CONTROLS - 595-ST100H-S08DN07 - 11A SS TRIM-REGULATOR$2,599.001" VALVE - 1"x9" BULB 140-200 Degree F & 8' STAINLESS STEEL CAPILLARY NON-INDICATING FOR HEATING APPLICATIONS#11-REGULATOR Stainless Steel Trim Regulator is a self-actuating control valve which automatically controls the temp of a fluid without external power. OVERALL DIMENSIONS: 16-5/8" x 5" Diameter - NEW for HIGH PRESSURE STEAM requiring POSITIVE SHUTOFF Learn More
- Norgren Fluidics - 4LD-010-D00+ - 4LD-010 - Check Valve, Miniature.Special Price $46.98 Regular Price $64.50 As low as $39.98IN STOCK - MORE THAN 100 READY TO SHIP!
Norgren Fluidics - 4LD-010-D00+ - 4LD-010 - Check Valve, Miniature.
A check valve is the simplest type of directional control valve used in hydraulic systems. Check valves stop the flow of fluid in one direction and allow free flow in the opposite direction. They are also known as non-return valves. Check valves may be used as prefill valves, bypass valves, pre-tensioning or protection of hydraulic components against pressure surges.
Extremely low crack pressures 10-32 UNF or barbed tube connections Direct in-line mounting Control flow direction in medical equipment, instrumentation systems, and in miniature pneumatic control systems.
Duckbill type check - Non-venting
Material: Body - Aluminum, Duckbill - Epichlorohydrin
Crack Pressure: 8" H2O (Pressure required to produce .001 scfm (28.3 cc/m) forward air flow)
This check valves has a 200 x 200 mesh, stainless steel inlet filter screen to protect the duckbill.
Furnished with two adapters for use with 1/16" ID flexible tubing.
Connection: 10-32 UNF.
Genuine Norgren Fluics - New Old Stock
Proudly Made in USALearn More