Time Delay Relay

Timer, adjustable. Module. Goes in series with relay coil. Learn More

2"Square module, ya put in 24 Alternating Volts and after a second and a half it'll switch 5mAmps to a whole amp of 120VAC. Versa-Timer Learn More

120VAC 8-pin Octal Plug-In - FIXED DELAY of 600-Seconds - Input voltage 120VAC must be applied before and during timing. Upon closure of the INITIATE switch, the output relay energizes, the time delay begins when the Initiate switch is Opened. 600 seconds +/-20% SPDT-10Amps 2.4"x1.7"x2.9" above socket. spec sheet included. Learn More

Switch selectable delays from 10Sec to 2.8Hours, in 10Sec increments via10-position DIP switch. Operating Voltage: 19 to 144V AC/DC. No first-shot effect. Load: 1A-max in series with module. Learn More

Timers, solid state. 1Amp max at rated voltage. Input: 24V. Mount: PCB. Case: module with five 1/4" male quick connect terminals. Dimensions: 2.025" square x 0.75" high. More info: http://www.ssac.com/catalog/TS601A01.pdf Learn More

SS TIMER OFF: 5-500MIN ON:10-1000-SEC 15a Learn More

Modular control: Power supply/relay for photocell receivers and incadescent light sources. Line voltage: 120VAC 60Hz. Line current: 25VA. Receiver supply: 24VDC (not-regulated) and Source supply 1.5/3,0/4.5 VAC at 1.6A. Two internal plug-in slots for optional (not supllied) accessory modules provided with default jumper PCB'c. Plug-in Output relay DPDT 5A 240VAC contacts . NEMA 1 housing. [No incadescent sources or photo-electric receivers included.] Learn More

Agastat TE Connectivity - SCBRX032XXFCXA - Relay, Timer.

Contacts: DPDT.

Contact Ratings: 10Amp.

Coil Voltage: 48VAC/DC.

Connections: 8 Octal Base.

Operating Temperature: -30 C to 65 C, Storage -40 C to 85 C

Note: 1 to 30 Seconds.

Repeat Accuracy +/-0.5%, Overall Accuracy +/-2% Max.

Switches upon application of 48V, switches again after delay until power removed.

Contacts: 345VA.

Mechanical Life: 10,000,000 Cycles

Expected Electrical Life: 500,000 Cycles at Rated Resistive Load.

TE Connectivity Agastat.

Genuine Agastat in Manufacturers's Packaging - New Old Stock

Alternate: 1423462-8

Learn More

Relay, timer. Input: AC. Contacts: DPDT. Contact Ratings: 125VAC/10A. Coil Voltage: 115 VAC. Connections: plug-in. Mech Mount: octal. Timing Function: ON delay. Timing Range: 0-60 sec. Note: Time adjustment knob on top. Learn More

1-120Sec TDR 120VAC DPDT ADJ KNOB ON TOP - PLUG IN - NEW Learn More

0-3 Sec 24VDC TDR DPDT-3A Miniature PCB mount 8-solder terminals. Learn More

TDR Power OFF-delay (with instantaneous reset) Relay Timed-out 2 Form C3 selectable time ranges over 1min to 10 min Plug in 240VAC 0-10 Min dial New 11-octal base Factory new manuf bx's. Nais/Panasonichttp://pewa.panasonic.com/acsd/timers/pm4h_4s/part-numbers Learn More

Relay, timer. Input: AC. Contacts: SPDT. Contact Ratings: 10Amp. Coil Voltage: 120V AC/DC (10Amp 240VAC, 10Amp 30VDC, 1/3HP 240VAC). Connections: 8 Octal, plug-in. Note: External resistor 250K = 5 Second. ON Delay. Supersedes SS-50262-D-817. NIB. Learn More

Relay, timer. Input: AC. Contacts: SPDT. Contact Ratings: 10Amp. Coil Voltage: 120V AC/DC (10Amp 240VAC, 10Amp 30VDC, 1/3HP 240VAC). Connections: 8 Octal, plug-in. Note: External resistor 250K = 1 Second. ON Delay. Supersedes TR-50262-D-814. NIB. Learn More

Relay, timer. Input: AC. Contacts: DPDT. Contact Ratings: 10Amp. Coil Voltage: 120V AC/DC (10Amp 240VAC, 10Amp 28VDC, 123HP 240VAC). Connections: 8 Octal, plug-in. Timing Range: 0.02 - 0.5 Second. Int On/Flasher. Note: Superseded SS-56422-01. NIB. Learn More

ISSC/Kanson Electronics - 1014-1-H-2-B - Relays, Time Delay.

The 1014 Model features instant contacts that simplify the timing control circuit. A separate relay, which operates in conjunction with the input power switch or control device, can be used to operate a separate control function. Timing function controls the timing relay. AC Control Circuit is compatible with both standard mechanical switches and solid-state proximity sensors.

Off Delay 0.06-25 seconds.

Bulletin 1014.

In: 115V 50/60

Output contacts: 115V 10A SPDT and NO, instant contacts 10A SPDT and NO timed contacts.

Case: 13 terminal board screw contacts, 2.9" square x 7" tall, screwdriver pot time adjust.

Learn More

PULSE TIMER OCTAL PLUG-IN 120V/60 "PULSE"Top Dial Control - DPDT-10AmpDANAHER Learn More

75 Second TDR Normally Open 3AMP 150VDC 3 AMP 250 VAC MODEL 501 Glass Tube 8-pin octal plug-in Learn More

Timer. Delay on make. 30VDC 2Amp. Delay: 400ms. Package: axial leads. Dimensions: 0.761" D x 1.997" high. Learn More

AMPERITE - 115C15 Relay, Thermal Timer.

Input: 115V AC/DC.

Contacts: SPST-NC.

Contact Ratings: 3A/125VAC.

Coil Voltage: 115V AC/DC.

Coil Current: 2W.

Connections: 8-pin octal plug.

Mech Mtg: 8-pin glass tube. Size: 1.25"D x 2.75"H above socket.

Weight: 0.5 lb.

Timing Range: 15 seconds.

Note: Hermetically sealed, heater-actuated.

Proudly Made in USA

Learn More

AMPERITE - 115C300 - Electron Tube, Relay, Time Delay. 115V AC/DC. SPST-NC-3A Octal

Input: 115V AC/DC.

Contacts: SPST-NC.

Contact Ratings: 3A/125VAC.

Coil Voltage: 115V AC/DC.

Coil Current: 2W.

Connections: 8-pin octal plug.

Mech Mtg: 8-pin glass tube.

Size: 1.25"D x 2.75"H above socket.

Weight: 0.5 lb.

Timing Range: 300 seconds.

Note: Hermetically sealed, heater-actuated.

New Old Stock

Learn More

One Normally-Closed and One-Normally-Open 10Amp contacts - OFF-DELAY Pneumatic Timer 0.2 - 60 Seconds 120V-60Hz screwdriver-adjust from top - 4.77"high x 2.52" x 3.27" - New in old box, with spec sheet - Mfg in Japan Learn More

Consists of 700-PT-A Pneumatic Time Delay Unit with Multiturn Vernier pot on top graduated 0.1 thru 60 Seconds, NO and NC terminals atop a 700-PT200A1-A DPST-NO 600VAC/DCmax AC Relay. No coil voltage stated. TEMPORISATEUR PNEUMATIQUE Learn More

TE Connectivity AGASTAT/AMERACE - 2112-D-4PA - On Delay Time Delay Relay

48VDC TDR .03-0.1Second

Unsealed, External Knob, Octal Plug, Chassis Mount

Octal plug-in 

Learn More