Potentiometers & Trimpots

KNOBS INC - Berkeley - 144010-2 - Hardware, Knob Cap.

Slide-on Mixer/Fader Caps

Upgrade the cosmetics on Older Studio Graphic Equalizers.

For Slide Potentiometers having standard rectangular metal shaft measuring 0.155" x 0.047" (4mm X 1.2MM).

Material: Black Anodized Aluminum Shell, Silver Lined Cap with Nylon Insert

Overall Dimensions: 0.355" x 0.21" x 0.8" Long (9mm X 5.37mm X 20.35mm).

Rectangular / Oval Ends, Very Sharp.

New Old Stock

Applications: High End Audio Multimix and many other model Audio Equalizer Consoles, Instrumentation, Amplifiers or DJ Equipment.

Check shaft measurement, Used on some Moog, Rogue, Behringer, ALPs, Tascam, Akai, Mackie, Yamaha, Soundcraft, Pioneer equipment.

Proudly Made in USA

Learn More

Ohmite 685-211 Potentiometer w/SPDT Switches One half ohm (0.5 Ohm). With SPDT switches 1A/125 V & 3A/125V. Contacts: All Solder Terminals. Dimensions: 1.253" D x 0.971" high. Mount: Bushing 0.453: long. Shaft: Knurled, Screw Driver Adjustable Dimensions: 0.238" D x 0.442" long. Made in USA Vintage - New Old Stock - Rare Learn More

IRC - VR-002 Potentiometer.

Resistance: 0.5 Ohm.

Power: 2 watt.

With a DPST NO 5Amp 125VAC switch.

Auxiliary contacts open at CCW extreme rotary position.

Mount: Panel mount.

Dimensions: 32.1mm D x 24.1mm high.

Threaded bushing: 3/8" D x 9.0mm high (seated).

Shaft: Knurled 1/4" D x 11.3mm long.

Screw Driver Adjustable.

Contacts: Solder.

Vintage New Old Stock

Made in the USA.

Learn More

Potentiometer. Resistance: 25K Ohm. Power. approximately 1/2 watt. Mount: PCB, two tabs 0.156" x 0.036". Dimensions: 0.919" D x 0.443" high. Overall 1.096" wide, plus contacts. Top, screwdriver adjustable. Contacts: long leads 0.625" long. Note: Marked 1460-078 and 304-7313. Learn More

IC. NV Trimmer potentiometer. Resistance: 50K Ohm. Package: 8 SOIC SMD. Learn More

BOURNS - 3296X-1-503 - Resistor, Trimpot.

Resistance: 50K Ohms.

Power: 1/2 watt.

Package: 0.375 square.

Side adjustable, 25 turns.

Learn More

ALPS - VR-074 - Potentiometer, slide.

Resistance: 10K Ohm.

Travel: 38.6mm.

Dimensions: 50.1mm long x 12.3mm wide x 12.3mm above board.

Actuator extends 15.6mm above body.

Contacts: solder.

Learn More

Precision Electronic Comp. PEC Canada - RV6NAYSD104A Potentiometer.

Resistance: 100K Ohm.

Power: 0.5 watt.

Tolerance: 10%.

Mount: PCB.

Dimensions: 13.1mm D x 12.0mm high. Bushing: 7.0mm long (seated).

Shaft: slotted, 3.2mm D x 15.0mm long.

Threaded bushing and shaft 23.0mm long.

Linear. New.

Connections: Solder.

Dimensions: Diameter 12.7mm X Length 11.5 mm

Actuator Diameter 3.175 mm X Actuator Length 22.225 mm

Note: Double marked SU1041S28.

Learn More

Potentiometer. Resistance: 35K Ohm. Power: 2 watt. Tolerance: 10%. Dimension: 1.096" (27.8mm) D x 0.550" (13.9mm) high. Note: Locking bushing. Slotted short shaft, 5/8" (overall bushing and shaft). Screwdriver adjustable. Solder terminals. Linear. Note: Double marked CLU3531. Learn More

Potentiometer. Resistance: 750 Ohm. Power: 2 watt. Tolerance: 10%. Dimension: 1.096" (27.8mm) D x 0.550" (13.9mm) high. Note: Locking bushing. Slotted short shaft, 5/8" (overall bushing and shaft). Screwdriver adjustable. Solder terminals. Linear. Note: Double marked CLU7511. Type AB. Learn More

Potentiometer. Resistance: 350 Ohm. Power: 2 watt. Tolerance: 10%. Dimension: 1.096" (27.8mm) D x 0.550" (13.9mm) high. Note: Locking bushing. Slotted short shaft, 5/8" (overall bushing and shaft). Screwdriver adjustable. Solder terminals. Linear. Note: Double marked CLU3511. Learn More

Potentiometer. Resistance: 750K Ohm. Power: 2 watt. Tolerance: 20%. Technology: wirewound. Dimension: 1.1" D x 0.501" high. Note: Locking bushing. Slotted shaft, 1/4" D x 5/8" long. Mount: Panel, bushing. Terminals: solder. New.Type AB. Linear. Double marked CLU7542. Short shaft. Learn More

Potentiometer. Resistance: 350 Ohm. Power: 2 watt. Tolerance: 10%. Technology: molded composition. Dimension: 1.16" (29.4mm) D x 0.625" (15.9mm) behind panel. Long shaft 0.375-32 thread, round 1/4" (6.35mm) D x 2" (50.8mm) bushing and shaft. Note: Mount: Panel. Rotation 312 Degree, +/-3%, 500V. Linear. Type AB. New. Cross RV4NAYSJ type. Connections: solder. Note: Please refer to specification sheet for full complete technical specifications. http://www.datasheetarchive.com/dl/Datasheet-026/DSA00451657.pdf Learn More

Potentiometer. Resistance: 750 Ohm. Power: 2 watt. Tolerance: 10%. Technology: molded composition. Dimension: 1.16" (29.4mm) D x 0.625" (15.9mm) behind panel. Long shaft 0.375-32 thread, round 1/4" (6.35mm) D x 2" (50.8mm) bushing and shaft. Note: Mount: Panel. Rotation 312 Degree, +/-3%, 500V. Linear. Type AB. New. Cross RV4NAYSJ type. Connections: solder. Note: Please refer to specification sheet for full complete technical specifications. http://www.datasheetarchive.com/dl/Datasheet-026/DSA00451657.pdf Maybe replace with equal manufactured by PEC Canada CU7511. Learn More

Potentiometer. Resistance: 35K Ohm. Power: 2 watt. Tolerance: 10%. Technology: molded composition. Dimension: 1.16" (29.4mm) D x 0.625" (15.9mm) behind panel. Long shaft 0.375-32 thread, round 1/4" (6.35mm) D x 2" (50.8mm) bushing and shaft. Note: Mount: Panel. Rotation 312 Degree, +/-3%, 500V. Linear. Type AB. New. Cross RV4NAYSJ type. Connections: solder. Note: Please refer to specification sheet for full complete technical specifications. http://www.datasheetarchive.com/dl/Datasheet-026/DSA00451657.pdf Learn More

Potentiometer. Resistance: 75K Ohm. Power: 2 watt. Tolerance: 10%. Technology: molded composition. Dimension: 1.16" (29.4mm) D x 0.625" (15.9mm) behind panel. Long shaft 0.375-32 thread, round 1/4" (6.35mm) D x 2" (50.8mm) bushing and shaft. Note: Mount: Panel. Rotation 312 Degree, +/-3%, 500V. Linear. Type AB. New. Cross RV4NAYSJ type. Connections: solder. Note: Please refer to specification sheet for full complete technical specifications. http://www.datasheetarchive.com/dl/Datasheet-026/DSA00451657.pdf Learn More

Potentiometer. Resistance: 10K Ohm. Power: 0.25 watt. Tolerance: 10%. Technology: Hot molded. Mount: PCB vertical, 3 wire leads. Dimensions: 13.1mm D x 14.5mm high. Actuator: screw. Miniature. Linear. New. Learn More

Meggitt Piher - PT10LH-1M - Resistor, trimming.

Resistance: 1Meg Ohm.

Power: 150mW.

Tolerance: 20%.

Side adjustable.

Dimensions: 10mm Diameter.

erm / Pitch: 5 x 2.5.

Mount: PCB, vertical.

Connections: PC Pins.

New.

Note: Linear. Trimpot.

Learn More

Potentiometer. Resistance: 2 Ohm. Power: 3 watt. #4 Taper. Technology: wirewound. Mount: 3/8-32 THD hole. Dimensions: 1.281" D x 0.625" high. Bushing 0.258" long. Threaded knurled shaft 0.250" D x 0.311" long. Contacts: 3 solder terminals. Learn More

Potentiometer. Resistance: 3 Ohm. Mount: Panel. Dimensions: 1.682" (42.7mm) D x 0.905" (22.9mm) high. Threaded bushing: 3/8" D x 12.3mm long. (seated). Shaft: Slotted 1/4" D x 2.7mm long. Contacts: solder terminals. Note: Marked CM10120. Made in the USA. Learn More

Vishay - 1202Y-5R - Resistor, Trimming.

Vishay Foil precision trimmers have the Bulk Metal® Foil resistive element which possesses a unique inherent temperature and load life stability. Plus, their advanced virtually back lash-free adjustment mechanism makes them
easy to set quickly and accurately and keeps the setting exactly on target.

Resistance: 5 Ohm.

Power: 0.5 watt.

Tolerance: 10%.

Package: 3 Pin with side adjust.

Learn More

VR-008 - X-1302-116 - 1376936 - Rheostat / Potentiometer.

Resistance: 10 Ohm.

Mount: Panel.

Dimensions: 24.3mm D (plus contacts) x 9.7mm high.

Overall 29.8mm high with shaft.

Contacts: 2 Solder Terminals.

Note: Marked X-1302-116, 1376936.

Common Application: Tone Control

Vintage - New Old Stock

Alternate: CLAROSTAT POSW-3 140235 

Learn More

Potentiometer. Resistance: 10 Ohm. Power: 3 watt. #4 Taper. Technology: wirewound. Mount: 3/8-32 THD hole. Dimensions: 1.281" D x 0.625" high. Bushing 0.258" long. Threaded knurled shaft 0.250" D x 0.311" long. Contacts: 3 solder terminals. Learn More

Potentiometer. Resistance: 10 Ohm. Panel, single hole mount. Dimensions: 1.262" D x 0.657" high. Threaded bushing: 0.309" long. Shaft: 0.098" long. Screwdriver adjustable. Contacts: 3 solder terminals. Learn More