Potentiometers & Trimpots

Analog Devices - AD8403AN10 - Potentiometer, Digital to Analog, 8 Bits (Min.), 24, PDIP, 4, 0 to 5.5 V

Part Status: Discontinued            

Taper:   Linear   

Configuration:   Potentiometer 

Number of Circuits: 4     

Number of Taps :  256    

Resistance (Ohms): 10k

Interface: SPI    

Memory Type: Volatile 

Voltage – Supply: 2.7V ~ 5.5V     

Features: Cascade Pin   

Tolerance: ±20%              

Temperature Coefficient (Typ): 500ppm/°C         

Mounting Type: Through Hole   

Supplier Device Package: 24-PDIP            

Package / Case:  24-DIP (0.300", 7.62mm)             

Operating Temperature:  -40°C ~ 125°C 

Resistance - Wiper (Ohms) (Typ) :  200

Learn More

IC. E2POT� Nonvolatile digital potentiometer. (Variable resistor). Resistance: 10K Ohm. Package: 8 Dip. Learn More

XICOR - X9C103P - IC. E2POT

Nonvolatile digital potentiometer. (Variable resistor).

Resistance: 10K Ohm.

Package: 8 Dip.

Learn More

Resistor, trimming. Resistance: 10K Ohm. Power: 1/2 watt. Tolerance: 20%. Side adjustable. Mount: PCB. Dimensions: 0.754" long x 0.177" deep x 0.315" high. Package of 10. Learn More

Resistor, trimming. Resistance: 10K Ohm. Mount: PCB, 3 leads. Vertical. Top adjustable. Dimensions: 7.9mm long x 4.8mm wide x 8.5mm high. Note: Trimpot. Learn More

Resistor, trimming. Resistance: 10K Ohm. Power: 0.5 watt. Single turn. Cermet, top adjustable. Mount: PCB 3 pin. Learn More

7MM Round Trimmer 10K Has Test Dot Learn More

295357-103  Potentiometer.

Resistance: 10K Ohm.

Mount: Panel.

Dimensions: 15.6mm D x 8.7mm high.

Threaded bushing: 12.1mm long.

Shaft: 8.2mm x 3.2mm.

High Quality commercial Component 

New Old Stock

Learn More

Potentiometer. Resistance: 10K Ohm. 1 turn. Mount: Panel. Dimensions: 9/16" D x 1-1/8" high (overall). Shaft: 1/4" threaded. Has 2 soldered wires 2-3/4". Note: Double marked R1379232. Learn More

Resistor, cermet. Resistance: 10K Ohm. Power: 0.25 Watt. Tolerance: 10%. Maximum Voltage: 300V. Temp coef: -65DegC to -150DegC. Package: PCB mount 3 pin. Military MILR39035B. Bourns type 3262. 12 turn, side adjustable. Learn More

SPECTROL - 3296W-1-103 - Resistor, trimpot.

Resistance: 10K Ohms.

Power: 1/2 watt. Tolerance: +/-10%.

Maximum Voltage: 500V.

Package: Top adjust through hole PCB mount.

Dimension: 4.8mm x 9.7mm x 10.2mm high with (3) 5.7mm leads.

Series:3296 cermet potentiometer.

Learn More

Resistor, trimming. Resistance: 10K Ohm. Side adjustable. Mount: PCB. Dimensions: 7.7mm wide x 15.0mm above board. Trimpot. Learn More

TRIMPOT 10K CARBON LAYDOWN (103) Learn More

TRIMPOT 10K OHM CERMET LAYDN(103 Learn More

Precision Electronic Comp. PEC Canada - RV6NAYSD103A Potentiometer.

Resistance: 10K Ohm.

Power: 0.5 watt.

Tolerance: 10%.

Technology:Conductive element.

Contacts: Solder hook terminals.

Note: Shaft: 1/8". One turn.

Note: Maybe replaced with equal manufactured by Ohmite RV6NAYSD103A.

Learn More

Potentiometer. Resistance: 10K Ohm. Power: 0.5 watt. Tolerance: 10%. Package: solder terminals. Note: Double marked AS3607. More info: http://content.honeywell.com/sensing/hss/clarostat/pdf/controls/392-RV6.pdf Learn More

NOBLE - VJ4523-2PVN - 25D2-10C10K – TO15C10K - Potentiometer, Slide. Excellent Slide Operation Feel Type Resistance: Logarithmic Operating Temperature Range: 10 to 60℃ Rated Power: 0.10 W Travel Range: 45 +/- 0.5MM (1.77”) Sliding Force: 0.5-3.5N Dimensions (excluding shaft): Length: 60.37mm (2.38"), Width: 9.47mm (0.36") Height: 5.59mm (0.22"), Shaft Height: 13mm (0.50") Lever: Metal, Overall Length 0.985”, Width 0.197”, Thickness 0.046”, Top Taper Length 0.390” Rated Voltage: AC 200V, DC 10V Nominal Total Resistance: 10kΩ Resistance Tolerance: Within ±20 % of the nominal total resistance Insulation Resistance: 100MΩmin. at DC250V Dielectric Strength: AC250V for 1 minute Amount of the maximum attenuation: 75dB min. at 10kΩ (Nominal Total Resistance) Insertion loss: 0.1dB Max. Tracking Error: Within ±3dB at 0 to-40dB Slide Stop Strength of the Lever: 50N Sliding Life: 30,000 cycles Applications: Volume & Tone quality adjustment such as audio mixers Manufactured by: Taiwan Noble Electronics Part Marking: TO 15C10K 9734 Learn More

NOBLE - 20SB10K - RV24YN - Potentiometer.

Resistance: 10K Ohm.

Power: approximately 2 Watt.

One turn.

Mount: Panel, bushing.

Dimensions: 31.1mm D x 16.5mm high.

Bushing length: 9.8mm long.

Shaft: slotted 1/4" D x 9.3mm long.

Contacts: 3 solder terminals.

Linear Taper.

Made in Japan

Learn More

Potentiometer. Resistance: Dual 10K Ohm. There is one continuous turn for two ganged wipers. Mount: 3/8" D bushing. Dimensions: 1.258" (31.9mm) D x 1.671" (42.4mm) high. Plus bushing and shaft. Bushing length: 0.378" (9.6mm). Shaft length: 1/4" D x 0.473: (12.0mm) long. Contacts: 3 turret posts each pot. Note: precision. Learn More

NOBLE - 15A10K Potentiometer, Slide.

Mono Slider Potentiometer. Fader

Resistance: 10K Ohm.

Audio Taper 70-103-72 10K.

Travel: 4.0".

Dimensions: 5" long x 0.50" wide x 0.50" high.

Above Board 0.05" high.

Shaft: Forked 0.046" Thick x 0.156".

Note: Logarithmic, Audio Taper.

Weight: 1oz.

Genuine Vintage Noble - New Old Stock

Note: Used on Hill Audio Multimix and many other model Audio Equalizer Consoles. 

Alternates: 70-103-72 10K, 969714-01

Made in Japan

Learn More

Resistor, trimming. Resistance: 10K Ohm. Power: 0.1 watt. Tolerance: 30%. Series: PVZ3. Single turn, top adjust. Temperature coefficient: 500ppm Deg C. Material: carbon. Mount: SMD. Termination: J Lead. Dimensions: square 0.126" L x 0.122" W x 0.073" H (3.20mm x 3.10mm x 1.85mm). Rohs compliant. Package of 50. Learn More

Resistor, trimming. Resistance: 10K Ohm. Top adjustable. Mount: PCB 3 pin. Note: Trimpot. Learn More

Potentiometer. Resistance: 10K Ohm. Power: 4 watt. Single turn. Dimension: 1.562" D x 0.570" high plus terminals. Note: threaded bushing mount 0.402". Shaft length: 0.354" knurled. Manual and screwdriver adjustable. Learn More

GOULD Instruments - 296380 - Potentiometer.

Resistance: 10K Ohm.

Power: 1/2 watt.

1 Turn.

Shaft: 1/8" D x 1-1/8" long, plastic.

Learn More