Potentiometers & Trimpots

Potentiometer. Resistance: 10K Ohm. With switch. Tolerance: 20%. Mount: Panel. Dimensions: 24.7mm D (overall 30.6mm D with contacts) x 19.0mm high. Threaded bushing: 8.1mm long including bushing seat. Shaft: 1/4" D x 8.6mm long. Contacts: solder terminals. Note: V248-15R-1/4. Learn More

CTS - KS-8680 12K Potentiometer, Linear Taper.

CTS 605

Resistance: 12K Ohm.

Power: 2 watt. Screw Driver Adjustable.

Dimensions: 1.554" D x 0.694".

Bushing: 5/8" Shaft: 1/4" x 0.210" long.

Contacts: 3 Solder Terminals.

Learn More

OHMITE - RV4LAYSA153A Potentiometer.

Resistance: 15K Ohm.

Power: 2 watt.

Tolerance: 10%.

Carbon Composition Linear.

Type AB. Short 1/4" D shaft.

Double marked CLU1531.

 

Learn More

Resistor, trimming. Resistance: 15K Ohm. Mount: PCB, vertical. Thumbwheel, side adjustable. Note: Double marked R1378232 3463187-14. Dimensions: 15.2mm thumbwheel. Overall 15.2mm long x 7.0mm wide x 19.0mm high, above board. Trimpot. Package of 3. Learn More

Honeywell Clarostat - RA30NAFK153A Potentiometer, linear.

Resistance: 15K Ohm.

Power: 4 watt.

Single turn.

Technology: wirewound.

Nickel-plated brass flattened shaft 2.5" long overall with bushing 0.426" long.

Dimensions: 1-11/16" D x 0.765" high.

Termination: solder.

Made in the USA.

Learn More

Resistor, trimming. 15K Ohm 0.5 watt. Tolerance: 10%. Top adjust. Cermet 5/16" round. Mount: PCB. Note: 3339H-001-502. Learn More

VISHAY SPECTROL - 534-30 - Precision Servo Mount Potentiometer

Wirewound 2K Ohm.

Single Turn

Connection: Wire Terminal Ends

Linearity: 72000

Dimensions:  0.875" (22.22mm) Diameter, Length minus shaft 0.9375" (23.77 mm) 

Shaft Length: 0.50"  (12.8mm), Diameter: 0.125" (3.2mm) 

Lead Lengths: 12"

Made in USA.

Learn More

Resistor, trimming. Resistance: 20K Ohm. Power: 1 watt. Single turn, top adjustable. Technology: wirewound. Package: 3 Pin PCB. Learn More

Resistor, trimming. Resistance: 20K Ohm. Side adjustable. Mount: 3 pin PCB. Learn More

- Mepcopal / Bourns - RJR26FW203R – Trim Potentiometer Resistor, Cermet. 20K Ohm 0.25 Watt. RJR series trim pots are made to military specifications and are listed on the QPL (Qualified Parts List) which simply means that they are on a government approved list of parts that are approved for government and military use. RJR series trim pots are made to the MIL-PRF-39035. RJR series trim pots are offered with a very low failure rate of 0.01% per 10000 hours of testing. Bourns acquired Mepcopal’s Trimmers in 2015. Resistor, Cermet. Resistance: 20K Ohm. Power: 0.25 Watt. Tolerance: 10%. Maximum Voltage: 300V. Top adjustment. Temp Coef: -65DegC to -150DegC. Package: PCB mount 3 pin. NSN 5905-01-069-4465, 5905-01-176-5021. Mepco Military NSN 5905-01-176-5021. Bourns Type 3262. P/N RJR26FW203R Made in USA New Old Stock Individually Mil Packaged Learn More

New 20K-Ohm 10% Cermet Trimpots side adjustable Learn More

Potentiometer, trimming. Cermet 20 turn. Resistance: 20K Ohm. Power: 1 watt @ 70 degC, 400V max. Case: TO-116 dip, (4 Dip) rectangular. Mount: PCB, side adjust with shaft 2.3mm D x 8.7mm long. More info: http://www.bourns.com/pdfs/3099_obsolete.pdf Learn More

Potentiometer, trimming. Cermet 20 turn. Resistance: 20K Ohm. Power: 1 watt @ 70 deg C, 400V max.Case: TO-116 dip, rectangular. Mount: PCB, side adjust, smd screw. Learn More

SPECTROL - 3296W-1-203 - Resistor, trimpot.

Resistance: 20K Ohms.

Power: 1/2 watt.

Tolerance: +/-10%.

Maximum Voltage: 500V.

Package: Top adjust through hole PCB mount.

Dimension: 4.8mm x 9.7mm x 10.2mm high with (3) 5.7mm leads.

Series:3296 cermet potentiometer.

Learn More

VISHAY SPECTROL - 550-8074 Potentiometer. 

Resistance: 20K Ohm Wirewound.

Tolerance: 5%. Linear: 0.1%.

Dimensions: 0.871" (22.1mm) D x 1.079" (27.4mm) high.

Shaft: (1/8") 3.2mm D x 1.167" (29.6mm) long.

Contacts: Gold Plated Solder Terminals.

Note: Military NSN 5905-00-679-0484.  NIIN 00-679-0484

ALTERNATE P/Ns: 134672

Made in the USA.

Learn More

Teikoku Tsushin Kogyo - SINGAPORE NOBLE - V12M4-1S - 12M4-1(PH)S(SJ)13FB20K - Potentiometer.

Resistance: 20K Ohm.

With SPST Switch rated at 12VDC, 0.5A

Rated Power: 150V

Rotational Angle: 230 degrees +/-10

Mount: Panel or PCB, 3 leads.

Dimensions: 0.514" D x 0.302" high (Overall with shaft 0.864" high). 

Threaded Bushing Length: 0.234" long.

Shaft: Half 1/8" D x 0.301" Long.

SINGAPORE NOBLE - V12M4-1(PH)S(SJ)13FB20K

Alternate: RV-120

Applications: Audio/Visual, Industrial Controls, Medical Equipment.

 

Learn More

Potentiometer. Resistance: 20K Ohm. With PO/PO (Push on/Push Off) switch. Mount: Panel: threaded bushing, 7.9mm long (seated). Case: 18.7mm long x 16.1mm wide x 29.1mm behind panel. Shaft: 3.1mm (1/8") D x 41.3mm long. Note: Marked 27M728 ans U-20K-Ohm. With hardware. Learn More

CTS - 295357-203 Potentiometer.

Resistance: 20K Ohm.

Power: 1/2 watt.

Mount: Panel or PCB.

Dimensions: 0.6" Diameter x 1-1/8" High.

Shaft: 1/4" x 3/4" long.

New

Learn More

Potentiometer, linear taper. Resistance: 20K Ohm. Power: 2 watt. Screw driver adjustable. Dimensions: 1.554" D x 0.694". Bushing: 3/8" Shaft: 1/4" x 0.353" long. Contacts: 3 solder terminals. Learn More

CTS - 3463187-20, R1378141 Resistor, Trimming.

Resistance: 20K Ohm.

Mount: PCB.

Note: 3463187-20, R1378141.

Package of 5.

Learn More

Potentiometer. Resistance: 20K Ohm. Power approximately 1/2 watt. Mount: Panel. Dimensions: 18.5mm D x 8.6mm high. Threaded bushing: 11.8mm high (seated). Shaft: Slotted 1/8" D x 2.7mm long. With locking nut. Learn More

Potentiometer. Resistance: 20K Ohm, single turn. With a SPDT switch. Mount: Bushing 1/4" D x 0.373" long. Shaft length: 0.634". Dimensions: body 0.527" square x 0.750" high. Note: Marked AL-19 28V 125mA. has 6 RA wire leads. Learn More

Resistor, trimming. Resistance: 20K Ohm. Power: 0.5 watt. Tolerance: 10%. 18 Turns. Top adjustable. Cermet. Mount: PCB. Dimensions: 0.378" (9.6mm) long x 0.217" (5.5mm) wide x 0.378" (9.6mm) high. Learn More

Potentiometer. Resistance: 20K Ohm. Technology: wirewound. Package: enclosed, solder terminals. Dimension: 1/2" D x 1/2" high. Bushing: 1/4-32. Shaft: 1/8" x 7/16" long, slotted. Note: One (1) Turn. Learn More