Power Resistor

WARD LEONARD - RWO55W0.5 - Resistor, Ceramic.

Resistance: 0.5 Ohm.

Power: 55 Watt.

Tolerance: 10%.

Technology: Wirewound. Flat, Enamel Coated.

2 Hole Horizontal Mount with 4-5/16" centers.

Dimensions: overall 4-3/4" long x 1-1/4" deep x 0.614" high.

Contacts: Radial Solder Lugs.

Vitrohm.

Marked 55S0.5WL.

WARD LEONARD - RWO75S15000 - 75S15000 - Resistor, Ceramic.

Stripohm resistors utilize a flat, oval-shaped, ceramic base on which the resistive conductor is wound, they are practically identical in construction with Vitrohm tubular resistors. The core or base has a smooth surface with no sharp edges. This design precaution is taken to guard against wire breakage during manufacture. The fact that the core is slightly elliptical shape that increases the radiating surface slightly and provides a core considerably stronger than an ordinary flat rectangular base, and insures that the wire lies flat against the entire winding surface. Stripohm resistors are equipped with metal strip (spring clip type) mounting brackets. Stripohm resistor can be chassis mounted or stacked.

Resistance: 15K Ohm. (15000 Ohm)

Power: 75 watt.

Technology: Wirewound, Stripohm.

Terminals: Solder Lugs

Viteous Enamel Coated.

Dimensions: Overall 7-1/4" long x 1.079" wide x 0.6" high, including mount feet.

Note: Marked 75S15KWL.

New Old Stock

Additional Information: https://worldradiohistory.com/BOOKSHELF-ARH/Handbooks/Ward-Leonard-Electric-Handbook-Of-Power-Resistors-1959.pdf

WARD LEONARD - RWO75S4 - 75S4 - Resistor, Ceramic.

Stripohm resistors utilize a flat, oval-shaped, ceramic base on which the resistive conductor is wound, they are practically identical in construction with Vitrohm tubular resistors. The core or base has a smooth surface with no sharp edges. This design precaution is taken to guard against wire breakage during manufacture. The fact that the core is slightly elliptical shape that increases the radiating surface slightly and provides a core considerably stronger than an ordinary flat rectangular base, and insures that the wire lies flat against the entire winding surface. Stripohm resistors are equipped with metal strip (spring clip type) mounting brackets. Stripohm resistor can be chassis mounted or stacked.

Resistance: 4 Ohm. 

Power: 75 watt.

Technology: Wirewound, Stripohm.

Terminals: Solder Lugs

Viteous Enamel Coated.

Dimensions: Overall 7-1/4" long x 1.079" wide x 0.6" high, including mount feet.

Note: Marked 75S4WL.

New Old Stock

Additional Information: https://worldradiohistory.com/BOOKSHELF-ARH/Handbooks/Ward-Leonard-Electric-Handbook-Of-Power-Resistors-1959.pdf

WARD LEONARD - RWP50W100 - Resistor, Ceramic.

Resistance: 100 Ohm.

Power: 50 watt.

Non-inductive.

Flat sandstone.

2 Hole horizontal mount with 4-1/3" centers.

Dimensions: 4-3/4" long x 0.467" wide x 1.285" high.

Radial lug.

Note: Plaqohm.

Enclosure Type: Encapsulated

Mount: Chassis

Termination: Solder Lug

Flat sandstone.

Applications: Used in compact, high frequency electronic equipment.

WARD LEONARD - RWP50W1K Resistor, Ceramic.

Resistance: 1K Ohm.

Power: 50 watt.

Enclosure: Encapsulated

Mount: Chasssis

Termination: Solder Lug

Non-inductive. Flat Sandstone.

2 Hole horizontal mount with 4-1/3" centers.

Dimensions: 4-3/4" long x 0.467" wide x 1.285" high.

Radial lug.

Note: Plaqohm.

Marked 50P1KWL. Military NSN 5905-00-821-5367.

Applications: Used in compact, high frequency electronic equipment.

WARD LEONARD - RWP50W6700 Resistor, Ceramic.

Resistance: 6.7K Ohm.

Power: 50 watt.

Non-inductive.

Flat sandstone. 2 Hole horizontal mount with 4-1/3" centers.

Dimensions: 4-3/4" long x 0.467" wide x 1.285" high.

Radial lug.

Note: Plaqohm.

Enclosure Type: Encapsulated

Mount: Chassis

Termination: Solder Lug

Flat sandstone.

Applications: Used in compact, high frequency electronic equipment.