Resistors

Vishay HEI - FST10/10K NI Resistor, Tubular Ceramic. 10K Ohm.

Marked NI: Non-inductive style (special “NI”) with Ayrton-Perry winding. Ayrton–Perry windings of resistance wire are used to make wirewound RF resistors that are used at high frequencies, where inductance and capacitance are unwanted.The winding is made of two separate wires wound in opposing directions along an insulating form and connected in parallel at the ends. Since there are the same number of turns of wire in either direction, the magnetic fields of the two wires cancel each other out, so the coil has little inductance; and since adjacent turns of the two wires are at approximately the same voltage, there is little parasitic capacitance between the turns.

Resistance: 10K Ohm (10,000)

Power: 12 watt.

High Temperature Silicone Coating

Complete Welded Construction

Technology: Ayrton-Perry winding Wirewound Non-inductive.

Operating Temperature: -55 °C to 350°C

Dimensions: 1.761" (44.7mm) Long x 0.394" (10mm) Diameter

Two 3/16 Quick Connect Terminals.

Element:  Copper-nickel alloy or nickel-chrome alloy, depending on resistance value

Core: Cordierite, steatite

More info: https://www.vishay.com/search?searchChoice=part&query=FST10%2F10K

Huntington Electric Inc. - New Old Stock

Alternates: MILLS-71928, FST010

Made in USA

Caddock Electronics Inc - MS223N 10K 1% - Resistor, Non-Inductive. 10K Ohm 3W.

Resistance: 10 KOhm.

Power: 3 Watt.

Tolerance: 1%.

Voltage: 800V.

Material: Film, bonded to solid ceramic core.

High-temp silicone conformal coating.

Gold-plated leads.

High Voltage, High Temperature, Power Micronox.

More info: http://www.caddock.com/Online_catalog/Mrktg_Lit/TypeMS.pdf

Sterlco - SAM-10-11K - Resistor, Ceramic.

Resistance: 11K Ohm.

Power: 10 watt.

Technology: Wirewound.

Package: Axial Leads.

Alternates: Ohmite 20J11KE, Vishay Dale CW01011K00JS73

OHMITE - 95J11K0 Resistor, ceramic.

Resistance: 11K Ohm.

Power: 5 Watt.

Tolerance: 5%.

Package: axial leads.

Technology: wirewound.

Note: Silicone conformal coated.

Series 90.

WARD LEONARD - RWO75S15000 - 75S15000 - Resistor, Ceramic.

Stripohm resistors utilize a flat, oval-shaped, ceramic base on which the resistive conductor is wound, they are practically identical in construction with Vitrohm tubular resistors. The core or base has a smooth surface with no sharp edges. This design precaution is taken to guard against wire breakage during manufacture. The fact that the core is slightly elliptical shape that increases the radiating surface slightly and provides a core considerably stronger than an ordinary flat rectangular base, and insures that the wire lies flat against the entire winding surface. Stripohm resistors are equipped with metal strip (spring clip type) mounting brackets. Stripohm resistor can be chassis mounted or stacked.

Resistance: 15K Ohm. (15000 Ohm)

Power: 75 watt.

Technology: Wirewound, Stripohm.

Terminals: Solder Lugs

Viteous Enamel Coated.

Dimensions: Overall 7-1/4" long x 1.079" wide x 0.6" high, including mount feet.

Note: Marked 75S15KWL.

New Old Stock

Additional Information: https://worldradiohistory.com/BOOKSHELF-ARH/Handbooks/Ward-Leonard-Electric-Handbook-Of-Power-Resistors-1959.pdf