Medical

CCD camera for C-Mount lens , Dimensions : 4" long x 2" wide x 2.5" highwith one DB-15P (DB15 male) connector on the back. Learn More

Take standard "C" mount lenses - 1.85" mounting hole - 2.1 x 2.5 x 6.8"L Monochrome 12-pin female connector for Remote Control - BNC Video Out - Requires 12VDC 400mA P/S CCD HIGH RESOLUTION CAMERAS Learn More

KVP Divider/Mammo/Diagnostic. (Noninvasive). Desk top style. Dimensions: 3.5 x 8.25 x 2.375". Note: Missing 3 rubber feet. Made in the USA. Condition unknown/Sold as is. Learn More

Picker International - Marconi - 189564 Hardware, Plexiglass / Acrylic Sheet.

Shatter-resistent or lightweight alternative for glass.

Plexiglas sheet is an excellent electrical insulator with a high dielectric constant.

More Heat thermal shock resisant than glass but also has thermal movement 8 times higher than glass.

Dimensions: 4.5" Square x 0.5" thick.

Clear.

Former Application Manufacturer of advanced medical diagnostic imaging systems.

Learn More

HUMPHREY - P5098 - 1.5VDC Oxygen Valve / Manual Switch

Meriam Medical Equipment - New Old Stock!!

Approximate Overall Dimensions: H 1/ 1/8" X L 2"  D 7/8"

Also See SKU 

Proudly Made in USA

Learn More

MSA - 7-201-1 - 460968 - Comfo II Custom Respirator Facepiece - Black, Size Medium

The 460968 Half Mask Respirator is constructed of Hycar rubber with an elastic band.  

Respirator, Face Piece - New Old Stock

Comes with 60 page manual.

Price is for one (1) Comfo II Respirator Facepiece without filter cartridges. 

See SKU 32215 for MSA - 459322 - Comfo Respirator Filter Cartridges P100, Type H

 

Learn More

NEW HIGH RESOLUTION CCD CAMERA 12VDC 400MA S/N CCO1017A , P#0050353-02 New - uses C mount lens Learn More

BCI INTERNATIONAL - 71001BI - Circuit Boards. Rev E, Double Sided.

Manufactured for Picker International / Philips / Marconi Medical Systems.

Factory New

Made in the USA.

Learn More

High Voltage power supply module.

Learn More

Alimentation HV Power Supply. Tri-mode high voltage power supply. Used/RFE/Removed from equipment. Dimensions: 22 x 11 x 4cm. Learn More

Boards. Picker replacement. Assembly with many valuable components attached and or in sockets. Example: four PK1000 SYM0380897, four PK1000 NCR0380897, three VSLI VY13066-2. Learn More

Boards. Picker replacement. CPB Assembly with many valuable components attached and or in sockets. Example: one Intel A82389-10, Motorola XC68040HRC25M, one Signetics SCC2698BC1A84 and two ATT3042-100M84 integrated circuits. Learn More

Boards. Picker replacement. Assembly with many valuable components attached and or in sockets. Example: Forty eight Toshiba TC524258BZ-80. Learn More

Boards. Picker replacement. Assembly with many valuable components attached and or in sockets. Example: sixty four NEC 424100-70, 9534MEA12. Learn More

Boards. Picker replacement. Many valuable components attached in sockets. Learn More

CPU-A V1.0 board plug-in for ES2000-series medical electrostatic strip chart recorders. One of the first of these Gould made.Front panel connectors for RD422, AUX and IEEE Learn More

DOUBLE EXPOSURE RATE METER Learn More

Medical. Hand held temperature/finger probe. Complete on new cable with DB9 male connector. Learn More

THOMSON TUBES ELECTRONIQUES - TH7122A - Power Supply.

High Voltage Alimentation Power Supply

Approximate Dimensions: 9" x 4 1/2" X 2"

Manufactured for Picker International / Marconi Medical Systems.

Made in France

New Old Stock

Learn More

Boards. Camera preamp board assembly, 0630482-01 REV NC. Note: Bottom marked 0620482-01 Rev 1. Learn More

CCD Image sensor board. Rev 1, 0630481-01. PC assembly camera sensor FX711. Texas Instruments TC217 IC 1158X488. Learn More

HD1200 series display, 120V 60 Hz 70 watts. Made for Picker X-ray. Learn More

Wire lead. Tronomed. 1/2 of Set, only. Black, 30". Analog telemetry. Note: this is only 1/2 of the set. No 2nd wire nor the 4 pin connector as advertized through Scott Care. Learn More

RADNOTI - 159954 - Universal Stand Clamp for the Medical Industry.

Simply hook on and tighten thumb screw.  No need to disassemble existing stand or remove and replace components to add a an additional component.

Open Sided Connector.

Medium (Red).

Learn More