Microswitches

Honeywell Microswitch - 37XL11YD-43 Switch, Micro. Custom hall Effect Switch with Lever Actuation.

This is a Honeywell 3-pin Micro Switch with Hall Effect Sensor Aassembly.

Hall-Effect Switch with lever.

Connections: 3 Male 3/16" Quick Attach or SOlder Terminals.

Pins: 3-Pin = GND Minus,  +Voltage, Output

Mechanically Operated by magnet inside plunger, has 2" long lever.

Unactuated output voltage normally high (Off) solid state switch for 5VDC. " Minus Plus Zero ".

Dimensions are 1.1"(30mm) x 0.63"(16mm) x 0.40"(10mm). 

Alternate P/Ns: 1589292, A02297

Made in USA

OMRON - V-15G-2C-08-K Switch, micro P/B.

Contacts: SPST NC.

Contact Ratings: 15Amp 125/250VAC 2HP.

Connection: male 1/4" QC terminals.

Mech: Panel, with two holes at 0.960" centers.

Body: 1.099" long x 0.410" wide x 0.628" high.

Note: Listed: CSA.

Note: Mixed with Microswitch V3-302 with exact same specifications.

Honeywell - Micro Switch - 1PB871 Switch, SPST Mechanical Push Button Keyboard /Keypad Switch. 

The 1PB871 "One-Shot" keyboard switch containing an internal 311SM29 microswitch. The microswitch has hysteresis, with a release point around 0.3 to 0.4 mm higher. 

Contacts: SPDT One Shot.

Contact Ratings: 5Amp.

Total Travel: 5 mm

Actuation of the internal 311SM29 microswitch occurs at approximately 2.0 to 2.5 mm into switch travel.

Note: Depressing the actuator actuates the contacts for just milliseconds.

Application: Univac Keyboard 4118511-01 and others.  

NO Knobs or Keycap included.

Honeywell/Microswitch - V7-4A39E9

Status: Discontinued

Switch, Miniature Pin Plunger.

Momentary 

Contacts: SPST NC.

Contact Ratings: 5Amp 125, 250, 277VAC (1/10HP 250VAC).

Connection: 1/4" male QC terminals.

Mech: Panel. Panel hole: 28.9 mm long x 9.9mm wide x 15.9mm high with 24.4mm centers.

Note: Very sensitive, Operating Force .25N or 0.9oz max.

Honeywell/Microswitch - BZ-1RW84217 Switch, Micro.

Contacts: SPDT.

Contact Ratings: 15A 125V, 250V, 480V. 50/60 Hz

Rigid or Resilient actuator: Lever Actuator.

Connection: Solder Terminals.

Mech:Panel Mount.

Body: 49mm x 17.5mm x 25.2mm tall.

Note: Actuator length: 46.4mm.

Service Life; 100K operatings at rated load.

Approvals: UL, SCA, ENEC,CE

Honeywell/Microswitch - BZ2R55A2S Switch, micro, pushbutton.

Contacts: SPDT.

Contact Ratings: 15Amp 125VAC, 250, 480VAC (1/8HP 125VAC, 1/4HP 250VAC, 1/2A 125VDC, 1/4AMP 250VDC).

Actuator: Momentary.

Connection: Screw terminals.

Mech: panel, 2 hole mount 1" centers.

Panel hole: 1.937" long x 0.686" wide x 0.940" high.

Operating Force: 425gf    

Release Force:113gf     

Differential Travel:  0.002" (0.05mm)             

Overtravel: 0.005" (0.13mm)             

Operating Temperature: -55°C ~ 85°C       

Operating Position:   0.625" (15.9mm)        

Mechanical Life 20,000,000 Cycles

Note: Recessed button.

Limit switch.

Honeywell Microswitch - YZ-7RDTC Switch, Micro, Pushbutton.

Contacts: SPST.

Contact Ratings: 15Amp 125V, 250V or 460VAC. Contact Type - Silver

Dimensions: Length 1.938" X Width 0.688" x Height 0.984"

Max. Voltage Rating: 460 VAC & 250 VDC

Actuator: Normally Open, Momentary Action Single Switch

Switch Release Force: 4 Ounces

Operating Temp.: -55 C to 85 C

Switch Actuating Force: 28.0 Ounces

Actuator Movement: 0.030" Pretravel Max, 0.062" Overtravel Mon & 0.007 Differential Max.

Terminal Type: 2 Tab Solder Lug

Mounting: 1.000" Distance Between Mounting Facilities.

NSN: 5930-00-259-8640

Alternates: BZ-7RD-A2, 830931

Honeywell/Microswitch - YZ-2RL Snap Action Micro-switch.

Contacts: SPST NO.

Contact Ratings: 15Amp 125, 250VAC or 480VAC.

Connection: 2 Solder or screw terminals.

Operting Force 5 Oz. (141 gf)

Operating Temperature  -55c to +85C

Chassis Mount

Termination - Solder Lug

Body: Body: 1.943" (49.3mm) long x 0.679" (17.2mm) wide x 0.833" (21.1mm) high.

Mechanical Life - 20,000,000 Cycles

Note: Leaf actuated over pin plunger, requires only 1/16-inch of travel before circuit closes.

Honeywell/Microswitch - AS419A1 Switch, tilt.

Can handle 1 amp at 30 VAC/VDC for resistive load, 0.75amp for inductive load where differential angle between on and off positions is 5 deg. For larger differential angle of 10 deg., switch can handle 0.5 amp resistive at 110 vac. or 0.75 amps at 110 VDC.

Miniature Mercury Tilt Switch.

Package: Glass Envelope with 6" wire leads.

Dimensions: 0.175" OD x 0.9" long.

***PURCHASER AGREES TO HANDLE WITH CARE AND ACCEPT ALL LIABILITY. GLASS IS BREAKABLE AND Hg contact IS VERY DANGEROUS***

NSN: 5930-21-801-9024

Honeywell Microswitch - BZ2RQ18 Switch, Premium Series Limit, Snap Action w/Roller Plunger.

Contacts: SPDT.

Contact Ratings: 15A 125/250/480VAC.

Actuator: Plunger with roller.

Connection: Solder terminals.

Contacts: Silver

Elect config: Snap acting.

operating Temp.: -55 to 85C (-67 to 185F)

Mech: Threaded bushing with nuts, 0.46"D x 1"L.

Dimensions: MICRO SWITCH Standard 25,4 mm H x 17,8 mm W x 50,8 mm L (1.0 in H x 0.7 in W x 2.0 in L) 

Weight: 0.2 lbs.

Life: Long mechanical life up to 20,000,000 cycles at 95% survival

Note: Operating force: 9 - 13 ounces.(2.5 N to 3.61N)

Roller travel:0.01" plus 0.2" overtravel. 

Applications: Irrigation systems, Semi-trailer trucks, Timing devices, Office equipment, Test instruments, Medical/dental equipment, HVAC equipment, Manually operated devices, Valves

CHERRY ELECTRICAL PRODUCTS - E62-46K Switch, micro, roller.

Contacts: SPDT.

Contact Ratings: 10.1Amp 125/250VAC, 1/4HP 125VAC.

Connection: PC leads.

Mech: PCB. Body: 19.8mm long x 6.3mm wide x 11.4mm high.

Overall with actuator 25.0mm wide.

Note: Miniature. Listed: UL/CSA.

UNIMAX Switch, Micro. SPDT Contact Assembly.

For Unimax microswitches.

Contacts: NO & NC.

Note: No Actuator. Actual P/N 01781.

MICRO SWITCH - SW-186 Switch, Micro, Pushbutton.

Contacts: SPST NC.

Contact Ratings: 10Amp 125VAC, 5Amp 250VAC, 3A 460V, 2A 600V.

Connection: Screw Terminals.

Mech: Panel. Body: 1.963" Long x 0.680" wide x 0.808" High, plus Actuator.

Note: Marked: SW-186.

Type Z. New old Stock

Honeywell MICRO SWITCH - UX30C10C01 Switch, lever. SPDT

SX subminiature basic switches are the smallest snap-action switches from MICRO SWITCH. These switches are ideal where saving space and weight are important.

FEATURES
Compact size – helps minimize equipment size
Temperature Range: –25° to +85°C (–13 to 185°F)
Weight: 0.5 grams (.018 oz.)
UL/CSA  

Contacts: Silver Contacts - 1Amp at 125VAC.

Operation: Very light-26-gram force.

Momentary Subminiature.

Actutator: Flat Lever

Also sold in 100/bag. See SKU 127040

Honeywell/Microswitch - V7-4A33E9 Switch, micro, pin plunger.

Contacts: SPST NC.

Contact Ratings: 5Amp 125, 250, 277VAC (1/10HP 250VAC, L162).

Mech: Panel with two holes at 25.0mm centers.

Body: 29.0mm long x 10.2mm wide x 15.9mm high, plus connections.

Note: Very sensitive.

Listed: UL/CSA.

CHERRY ELECTRICAL PRODUCTS - E62-24MA Switch, micro.

Contacts: 3PDT.

Contact Ratings: 10.1Amp 125/250VAC, 1/4HP 125VAC.

Actuator: 3 Gang Lever, Momentary.

Connection: 2.4mm male Quick Connect Terminals.

Mech: PCB or Panel.

Body: 20.0mm long x 17.4mm wide x 12.6mm high plus contacts.

CHERRY ELECTRICAL PRODUCTS - E23  Switch, Micro, Roller.

Contacts: SPDT.

Contact Ratings: 5Amp 250VAC.

Connection: male 3/16" QC terminals.

Mech: Panel.

Note: Old New Stock - Mounted on steel plate.

Actual P/N: E23.

Switch, micro P/B. Contacts: SPST NC. Contact Ratings: 15Amp 125-250VAC (3/4HP 125V, 1-1/2HP 250V). Actuator: On-On. Connection: 1/4" male QC terminals. Mech: PCB or Panel (2 hole mt or bushing). Body: 1.828" long x 0.633" wide x 0.643" high. Note: Threaded bushing: 15/32" x 0.425" long.

UNIMAX - AL-118-Y Switch, Micro.

Contacts: Normaly Open. Snap Action, Limit Switch

Contact Ratings: 15Amp 125/250VAC. 3/4 HP @250, 1/2 HP@ 125 VAC

Actuator: Lever.

Connections: Brass 1/4" Qucick Connect Terminals

Mech: Panel, 2 holes at 1" centers.

Panel hole: 1.817" long x 0.625" wide x 0.652" high.

Made in USA

New Old Stock 

Panasonic MATSUSHITA - AH11129 Switch, Micro, lever.

Contacts: SPDT.

Contact Ratings: 3Amp 125VAC.

Actuator: (C, NO, NC).

Connection: Solder Terminals.

Mech: 2 holes 6.3mm centers.

Body: 12.8mm wide x 5.6mm deep x 6.0mm high plus terminals and lever.

Note: Miniature.

Made in Japan

HONEYWELL - Premium Miniature Microswitch - V7-4A23E9-000-1 Switch, Micro, Pin Plunger.

Contacts: SPST NO.

Contact Ratings: 5 Amp 125, 250, 277VAC (1/10HP 250VAC).

Operating Force: 500 mN

Connection: 1/4" male QC terminals.

Mech: Panel.

Panel hole: 28.8mm long x 10.2mm wide x 16.0mm high with 24.2mm centers.

Operating Force: 25 g max.

RoHS Compliant

New Old Stock

Honeywell MICRO SWITCH - V7-4A13E9D8-000-1 Switch, micro, pushbutton, pin plunger.

Contacts: SPDT NC & NO.

Contact Ratings: 5Amp 125/250/277VAC (1/10HP 250VAC).

Connection: one 3/16" male and two 1/4" QC terminals.

Mech: Panel, 2 hole mount with 0.95" centers.

Panel hole: 1.137" long x 0.391" wide x 0.622" high.

Note: Snap-action.