Roller Switch

CHERRY ELECTRICAL PRODUCTS - D41LR1RA Switch, Roller.

Status: Discontinued

Contacts: SPDT.

Contact Plating: Gold

Contact Ratings: 1A @ 125VAC.

Operating Temperature: -40 to 85 C

Actuator: Momentary. very light force required.

Connection: 3/16" Quick Connect or solder terminals.

Body: 38mm long x 28mm x 9.6mm.

Learn More

Honeywell Microswitch - BZ2RQ18 Switch, Premium Series Limit, Snap Action w/Roller Plunger.

Contacts: SPDT.

Contact Ratings: 15A 125/250/480VAC.

Actuator: Plunger with roller.

Connection: Solder terminals.

Contacts: Silver

Elect config: Snap acting.

operating Temp.: -55 to 85C (-67 to 185F)

Mech: Threaded bushing with nuts, 0.46"D x 1"L.

Dimensions: MICRO SWITCH Standard 25,4 mm H x 17,8 mm W x 50,8 mm L (1.0 in H x 0.7 in W x 2.0 in L) 

Weight: 0.2 lbs.

Life: Long mechanical life up to 20,000,000 cycles at 95% survival

Note: Operating force: 9 - 13 ounces.(2.5 N to 3.61N)

Roller travel:0.01" plus 0.2" overtravel. 

Applications: Irrigation systems, Semi-trailer trucks, Timing devices, Office equipment, Test instruments, Medical/dental equipment, HVAC equipment, Manually operated devices, Valves

Learn More

CHERRY ELECTRICAL PRODUCTS - E62-46K Switch, micro, roller.

Contacts: SPDT.

Contact Ratings: 10.1Amp 125/250VAC, 1/4HP 125VAC.

Connection: PC leads.

Mech: PCB. Body: 19.8mm long x 6.3mm wide x 11.4mm high.

Overall with actuator 25.0mm wide.

Note: Miniature. Listed: UL/CSA.

Learn More

Cherry Electrical Products - E73-47KT Switch, Micro w/Roller Arm.

Contact Ratings: 0.1Amp 125VAC, Gold cross-point (5V logic) contacts.

Actuator: NC Snap-action.

Long life coil spring mechanism

High temperature thermoplastic button, cove and base.

Temperature Rating -40 to +85C

Hydrin contact boot

Macromelt polyamide potting

Stainless steel actuator

Connection: 2 wire leads 9.5" long.

Mech: mounting holes on about 5/8" centers.

Note: Only requires about 1/3" of movement for actuation.

Life at rated load = Min. 6000 operations

Water-resistant and weatherproof.

Learn More

C & K Components - 3TMA-4A Switch, Micro. with Roller.

SPDT NC/NC

15Amp 1/2HP 125, 250VAC/ 0.25Amp 250VDC/ 0.5Amp 125VDC/3Amp 125VAC.

Operating temperature: 67 Deg F to 302 deg F (55 Deg C to 150 Deg C).

Double marked: TMCJ4A.

Listed: UL/CSA.

Note: Cam Rotary.

New Old Stock

Learn More

Switch, limit with manual reset. Contacts: DPST. Contact Ratings: 10A 125/250VAC. Actuator: two positions, maintained. Connection: four solder terminals. Mech: riveted on small plate. Body: 0.25" x 1.2"L x <1.0"H. Note: Has unusual mechanical reset once roller/lever is pushed and snaps.. Learn More

JBT Switch, Rocker.

Contacts: SPDT.

Contact Ratings: 5A 125VAC.

Actuator: paddle.

Connection: PC pins.

Mech: panel mount, two holes 0.93" spacing plus two 0.25" spacers, screws & nuts.

Package of 2.

Learn More

SPDT 15A Moveable ROLLER LEVER SNAP-ACTING MICROSWITCH UL/CSA 125,250 OR 480VAC BASIC SWITCHES - Roller swings back down to 90-degrees - Unique - NEW Learn More

Switch, Limit. SPDT-5A. Actuator: Roller Plunger. Connection: 5-meter 4-conductor cable. Mech: 2-hole 25mm spacing. Body: 40 x 67 x 16mm. Enclosure: NEMA 4, 6 and 13. IEC IP67. Weight: 1.5 lb. Pkg of 1. Note: Mechanical life: 10,000,000 operations. Series A1.

Learn More

Switch, micro w/roller. Contacts: SPDT (x2). Contact Ratings: 0.1Amp125VAC (0.01A {0.05A} 250VAC. Connection: male 3/16" QC terminals. Mech: panel. Panel hole: 27.9mm long x 20.5mm wide x 15.9mm high. Has two mount holes at 25.0mm centers. Roller extends 10.1mm to 10.2mm from switch. Note: Double wide (2 switches). Listed UL/CSA. Learn More

Switch, micro. With roller. Two (2) position, one NO, one NC, 10Amp 125/250VAC. Learn More

Switch, rocker. Contacts: SPDT. Contact Ratings: 25mA/20VDC. Actuator: On-On. Mech: PCB, with frame, 4 pin. Note: Miniature. Learn More

Switch, micro. With roller. One NO 15A 125/250VAC. Learn More

Telemecanique - XCKJ10541H7 Switch, limit, with adjustable roller.

Contacts: 1 NO, 1 NC.

Lamp Voltage: AC15, 240VAC (250VDC) 3Amp (10Amp max).

Note: Roller head: ZCK-E05. Ui: 500V,

Operating Temperature: -25 C to 70 C

Uimp: 6kV. ENC type 4.

Listed: UL/CSA.

Learn More

Honeywell/Microswitch - V7-2B17D8-207 Switch, Micro, Roller.

Contacts: SPDT.

Contact Ratings: 11Amp 125, 250, 277VAC 1/3HP (1/2Amp 125VDC, 1/4Amp 250VDC, L156 4Amp 125VAC).

Connection: (3) 0.187" Male QC Terminals.

Mech: Two Holes at 0.975".

Panel hole: 1.133" long x 0.396" wide x 0.623" high, plus terminals and roller/arm.

Basic Snap Action.

Maximum Operating Force: 0,44 N [21.6 oz].

Learn More

Microswitch, no arm. 10Amp 600VAC. SPDT-1NO/1NC. Nema A600. Model B. For rotary side. Learn More

Switch, micro roller arm. Contacts: SPDT - 1NO, 1NC. Contact Ratings: 15Amp 125, 250 or 480VAC, 2Amp 600VAC, 1/2Amp 125VDC, 1/4Amp 250VDC, 1/8HP 125VAC, 1/4HP 250VAC. Connection: 14NPT conduit. Mech: Panel. Note: Limit switch, adjustable with steel roller. Learn More

Switch, micro roller-plunger. Contacts: SPDT-1NC, 1NO. Contact Ratings: 15Amp 125, 250 or 480VAC, 2Amp 600VAC, 1/2Amp 125VDC, 1/4Amp 250VDC, 1/8HP 125VAC, 1/4HP 250VAC . Connection: 14NPT conduit. Mech: Panel. Note: Listed: UR/CSA. Learn More

Switch, micro roller arm (over P/B). Contacts: SPDT. Contact Ratings: 15Amp 125, 250 or 480VAC, 2Amp 600VAC, 1/2Amp 125VDC, 1/4Amp 250VDC, 1/8HP 125VAC, 1/4HP 250VAC. Actuator: On-Mom. Connection: Screw. Mech: Panel. Note: Environmentally sealed plunger. Learn More

Switch, micro roller. Contacts: SPDT. Contact Ratings: 15Amp 125, 250, 480VAC, 1/8HP 125VAC, 1/4HP 250VAC, 1/2Amp 125VDC, 1/4Amp 250VDC. Connection: Screw. Mech: Panel. Learn More

Switch, micro roller arm. Contacts: SPDT-1NO-1NC. Contact Ratings: 20Amp 125, 250 or 480VAC, 10Amp 125VAC "L", 1HP 125VAC, 2HP 250VAC, 1/2Amp 125VDC, 1/4Amp 250VDC . Actuator: Left. Mech: Panel. Note: Limit switch, adjustable with steel roller. Learn More

Switch, micro roller arm. Contacts: SPDT. Contact Ratings: 20Amp 125, 250, 480VAC, 10Amp 125VAC "L", 1HP 125VAC, 2HP 250VAC, 1/2Amp 125VDC, 1/4Amp 250VDC. Connection: Screw. Mech: Panel mount. Learn More

Microswitch, roller & spring only. Actuator (Roller lever). For limit switches. Learn More

Microswitch with roller arm. 10Amp 120, 240VAC or 480VAC, 1/3HP 120VAC, 3/4HP 240VAC, 0.8Amp 115VDC, 4Amp 230VDC, 0.1Amp 550VDC. Pilot duty: 600VAC max. Learn More