Thumbwheel Switch

Switch, BCD thumbwheel. Contacts: 1P 10 Position (0-9). Elect config: PCB. Note: Will mate to a 6 position edgecard connector. Gold plated contacts and wipers. Used/Very good condition. Learn More

Cherry Electrical Products - T55-07M0 Switch, Pushwheel /Thumbwheel.

The smallest of them all! Dustproof design. Offered in a wide variety of positions and output codes. Furnished with extended PC board to provide mounting of other components. 

Status: Discontinued

Cherry Industrial Solutions - Subminiature Pushweel Switch

Single 8 Position, Code BCD

Output: 0 - 7

Two Pushbuttons for Up and Down.

Stackable.

Binary Encoded: Pins are labeled 1, 2, 4, 8 and C

Five Position Edge Card Contacts or Solder.

Dielectric Strength: 500 VAC

Temperature: -40°C to + 70°C

Dimensions: 0.300" Wide x 0.591" High, 0.946" Behind Panel.

Alternate: Newark 93F5293, ZF 0T5507M0

Applications: Industrial, Commercial, Aerospace

New Old Stock - Rare

 

 

Learn More

SAE - 901056 Switch, Thumbwheel.

Actuator: 0-9 (10 Position).

Connection: 7 Pin ( 6 x 1).

Mech: PCB.

Body: 19.9mm long x 20.5mm wide x 10.1mm high. (With dial on right).

Note: Stripswitch.

New Old Stock

Learn More

EECO - 1A212001G - 1A212001G219 Switch, Thumbwheel.

Actuator: 0-9 (10 position).

Connection: 12 dip.

Mech: PCB. Body: 19.6mm long x 20.1mm wide x 10.2mm high (With dial on right).

Note: Stripswitch.

Learn More

EECO - 177608GN

Switch, rotary BCD.

Contacts: 8 Position.

Connection: Extended PC leads, six.

Mech: PCB . Panel hole: 0.515" wide x 1.211" high.

Note: Thumbwheel 0-7.

Learn More

EECO - 1A211034GF

Switch, Thumbwheel/StripSwitch.

Actuator: 0-9 and A-F.

Orientation: Counter Clockwise Rotation

Connection: 12 dip. Mech: PCB.

Body: 19.6mm long x 20.1mm wide x 10.1mm high (With dial on right).

Note: Stripswitch. Marked 1A211034GF Hall-Mark.

More info: http://www.eecoswitch.com/

New Old Stock - Rare

Learn More

Switch, thumbwheel. Actuator: 0-9 (10 position x 2). Connection: 12 Pin (inline contacts). Mech: PCB. Body: Overall 19.6mm long x 40.5mm wide x 10.9mm high. (With dial on right). Note: Stripswitch (2 Pieces joined). Learn More

EECO Switch - 124C8 - 188607 - 1 Digit Rotary Thumbwheel Switch

Status: Discontinued

0 Thru 9 BCD

I Digit, 10 Position

Contacts: 6 Pin PCB, Gold plated

Marked : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9

Dimensions: Width: 0.47 in, Height: 1.4 in, Length: 1.2 in

New Old Stock

 

Learn More

Switch, rotary. 1P BCD 0-9 position. Thumbwheel. Series 2100. Package: 6 Dip. Note: more info at http://www.eecoswitch.com/product/2100-series/ Learn More

EECo - 179312 - Switch, Rotary Thumbwheel.

10 Position.

Marked SU, M, TU, W, TH, F, ST, with 3 blanks.

Contacts: gold.

Learn More

Switch, thumbwheel. Two position (+ or -).

Learn More

ON/OFF PLUS 1-8 1 DIGIT THUMBWHEEL SW Learn More

EECO - 177606M – Thumbwheel / Rotary Pushwheel Switch, 2 Pole BCD 0-2 and BCD 0-9 (0-2, 0-9). Switch, Rotary. 2 Digits, 3 & 10 Positions Contacts: 2 Pole (Dual) BCD 0-2 and 0-9. Connection: PC Solder Leads. Current / Voltage Ratings: 3A 115VAC 28VDC Mech: Panel, with four holes at 1.825" centers. Panel Hole: 1.42” Wide x 0.98” Tall x 1.178" deep, behind panel. Mount Flange is 1.76" (44.7mm) Wide x 1.2” (30.48mm). Temperature: -20 C to 75 C Seal: Dust Resistant Circuit Material: Gold over Nickel Plating Terminals: Copper Alloy, Plated for Soldering Finish Designator: Spray Matte Finish Note: Bottom reads 177606M. Dual Marked: 517356 Price is for 1 Dual Thumbwheel - Rotary Pushwheel Switch. Removed from EECO Factory Packaging of Switches per box. Learn More

Switch, dip. Stripswitch 1-4 position. 1.2.3.4. Thumbwheel. Mount: PCB. Package: Dip, 20mm square. Learn More

Switch, thumbwheel. 4 Position (0-9). Stripswitch. Dimensions: 3.192" long x 0.774" wide x x 0.402" high. Each switch has 12 PC leads. Learn More