Toggle Switch

Switch, toggle. SPDT 10Amp 250VAC. 3 Position, center off, both sides momentary. Bushing length: 1/2". Lever length: 9/16". Contacts: 3 screw terminals. Learn More

Cutler-Hammer Eaton - 8906K4920 - Switch, Toggle. Environmental Sealed, Resistant to Dust, Dirt, Spray Extreme Temperatures Contacts: SPDT. Contact Ratings: 15A @ 125VAC, 15A @28VDC. Actuator: Center-Off. Pull-to-Switch. Momentary Both Sides. Requires 0.47" diameter hole to mount, 15-32 Bushing 32 Thread Connection: Screw Terminals with screws, black dress nut, washer, nut and locating ring. Mech: Panel Mount. Thermoset molding materials meet flame retardant requirements Temperature Range: -85°F to +160°F (-65°C to +71°C) Life: 20,000 operations at rated load 40,000 operations mechanical life Note: Must Pull-to-switch either side. Applications: Aircraft-instrument, military-purpose style. Lever lock with lever seal. Made in USA - Mil Grade Lever Lock toggle switch Learn More

Eaton - Cutler Hammer - SF21SCW191 Switch, toggle.

Contacts: Miniature SPDT.

Contact Ratings: 125VAC 5Amp.

Actuator: On-On.

Connection: solder terminals.

Mech: PCB or Panel with threaded bushing.

Bushing length: 0.311".

Actuator length: 0.414".

Complete with hardware.

NSN: 5930-00-270-1674

Learn More

C & K Components - 7411SHZBE Switch, toggle.

Contacts: 4P.

Contact Ratings: 5Amp 120VAC or 28VDC (0.4VA 20V AC/DC).

Actuator: On-On-On.

Connection: Solder.

Mech: PCB, vertical.

Panel hole: 0.845" long x 0.500" wide.

Note: Miniature. Threaded bushing.

Complete with hardware.

Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 230VAC max, 2Amp Res AC. Connection: PC RA mount, PC terminals. Body: 0.700" long plus contacts, bushing and actuator x 0.444" wide x 0.311" above board. Note: Non-threaded bushing: 0.242" long. Actuator: 0.430" long. Learn More

Switch, toggle. SPDT 10Amp 250VAC. 2 Position, On/None/ON(Mom). Bushing length: 1/2". Lever length: 9/16". Contacts: 3 - 1/4" quick connect terminals. More info: Page 154 http://www.eaton.com/ecm/groups/public/@pub/@electrical/documents/content/pg07002001e.pdf Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 15Amp/125VAC. Actuator: On-On. Mech: panel, 3/8" bushing. Body: 1.14" long x 0.64" wide x 0.615" high. Panel hole: Contacts: pcb terminals. Note: Bushing length: 0.517" (13.2mm). Actuator length: 0.683" (17.3mm). Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 10Amp 125VAC. Actuator: On-On (Mom). Connection: solder terminals. Mech: Bushing 15/32" - 32 thread. Body: 1.138" long x 0.643" wide x 0.644" high plus terminals. Note: Only marked ST42F. Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 10A 125VAC. Actuator: On - On. Connection: solder terminals. Mech: Panel, bushing 15/32" - 32 thread. Body: 1.149" long x 0.632" x 0.90" behind panel. Note: Double marked ST42D. Learn More

Switch, toggle. Contacts: SPDT. Contact Ratings: 0.4VA 20V AC/DC, 5Amp 120VAC. Actuator: (Mom) Off (Mom). Connection: solder. Mech: PCB. Body: 12.8mm long x 6.7mm wide x 9.7mm high with sealed contacts. Bushing 15/32 x 11.5mm long. Heavy bat: 18.1mm long. Note: miniature. Used for switching logic levels of current. If you exceed that current, the gold plating will flash off and they can be used for 5Amps like all the rest. Learn More

C & K Components - 7103SY9AVBE3 - Switch, Toggle.

SPDT 5Amp 250VAC/2Amp 250VAC.

Actuator: On/Off/On.

Unthreaded bushing.

Miniature.

Mount: PCB Right Angle

Learn More

Switch, pushbutton. Contacts: SPDT. Contact Ratings: 1Amp 120VAC. Actuator: On-(Mom). Connection: PC leads, sealed. Mech: PCB. Panel hole: 0.508" long x 0.265" wide. Note: Miniature. Complete with splachproof boot. Learn More