Toggle Switch

Switch, Toggle.

Contacts: SPDT.

Contact Ratings: 6Amp 125VAC, 3Amp 250VAC (1/4HP 125-250VAC).

Actuator: Onn-Off (Mom).

Dielectric Strength: 1,000 V RMS (minimum)

Insulation Resistance: 100 megohms (minimum)

Base Material: Phenolic

Actuator Style: Bat Toggle

Connection: Male 1/4" QC terminals.

Mech: Panel, Standard 3/8" D x 0.476" (12.1mm) long, bushing mount.

Panel hole: 1.328" (33.7mm) long x 0.756" (19.2mm) wide x 0.809" (20.5mm) high, plus contacts.

Note: Center off.

Flat bat 0.305" 97.7mm) wide at base x 0.640" (16.2mm) long, from bushing.

New Old Stock

UL Listed, CSA Approved

C & K Components - 7103J60ZMI32 Switch, Toggle/Paddle.

Contacts: SPDT.

Contact Ratings: 5Amp 120V, 2Amp 250V.

Contact Material: Silver

Operating Temperature: -30 C to 85 C

Actuator: On-Off-On.

Connection: PC leads.

Mech: Panel, Snap-in.

Panel Hole: 17mm long x 12mm wide x 17mm behind panel plus contacts.

Note: Red Paddle J60 actuator.

Electrical Life: 40,000 Cycles

Complete with black bezel 19.43mm long x 15.62mm wide.

New Old Stock

JBT - JMT-123 - 5930-00-027-0247 -Switch, Toggle.

Aircraft Toggle Switches - Panel Mount

Contacts: SPDT.

Contacts: Silver

Contact Ratings: 5Amp 125VAC, 3Amp 250VAC.

Actuator: Both Switches are On-On.

Mounting Faceplate 1.317" wide x 3.150" high.

Right Angle Mountable Edge/Flange with 2 holes at 2.15" centers.

Note: Two SPDT Miniature Toggle Switches with only SPST in use.

Assembly marked HI has three wires, LO has 2 wires from switch, joined to a 3 Position male connector.

Proudly Made in USA

Switch Alternates: A123S1YZQE, 7101SYZQ, 7101SYZQE, MST-105D

UPC 0767842189378

NSN: 5930-00-027-0247

Note: Surplus Assembly for a Discontinued Project - New

EATON - JBT - 3-627 Switch, Instrument Toggle.

Contacts: SPDT.

Contact Ratings: 6Amp 125VAC, 3Amp 250VAC.

Actuator: Center-Off, 1 side momentary, ON/OFF/(ON).

Bushing Diameter: 0.24"

Connection: 3 Solder Terminals.

Mech: PCB. Miniature Toggle.

New Old Stock - Made in USA

JBT - PFH-4223P Switch, Toggle, Heavy Duty AC Industrial

Contacts: SPDT.

Contact Ratings: 20Amp 125VAC, 10Amp 250VAC (3/4HP 250VAC, 1/2HP 125VAC).

Actuator: Off-On.

Connection: Brass Male 1/4" Quick Connect Terminals.

Mech: Panel, standard 3/8" D x 0.470" (11.9mm) long, bushing mount.

Panel hole: 1.339" (34.0mm) long x 0.750" (19.0mm) wide x 0.811" (20.6mm) high, plus contacts.

Note: Flat Bat 0.362" (9.2mm) wide x 0.653" (16.5mm) long.

Vintage - New Old Stock

Typical Applications: Marine, Food Service, Generator, Industrial Control ,Office Automation

Proudly Made in USA

C & K Components - SP-ITI - 7000 Series Switch, Toggle.

Contacts: SPDT.

Contact Ratings: 0.4VA, 20V Max.

Actuator: ON-On.

Connection: Right Angle PCB leads.

Mech: Through hole - PCB.

Note: Non-threaded bushing.

Short bat.

Sealed Miniature switch.

Listed: UL/CSA.

Color: Red.

ITT C&K - T301 Switch, Toggle.

Contacts: 3PDT.

Contact Ratings: 0.4VA / 5Amp.

Actuator: On-On.

Actuation: Vertical 

Connection: 9 Right Angle Terminals.

Mech: PCB.

Note: Non threaded bushing 0.293" long.

Actuator: 0.270" long.

Proudly Made in USA

Alternate: C&K 7000 Series 7301MD9AV2BE

New Old Stock

FORD - 3-022 - Switch, Toggle.

Contacts: 4 Position (3 Position Plus Off).

Connection: 4 Wire, 6".

Mech: Panel.

Body: 34.6mm long x 19.1mm wide behind Panel.

Heavy Duty Bracket & 4 Pin Connector

Above panel 36.4mm long x 20.2mm wide x 45.5mm high (including actuator).

Note: Blower Motor Switch.

Genuine Ford - New Old Stock - Vinatage

Carlings Technologies - Carlingswitch - 6FC54-73XG - Switch, Toggle.

The 6FC54-73 is a single-pole double-throw (SPDT) Toggle Switch with screw terminal, an unsealed bat actuator and ON-OFF-ON function. The F-Series single toggle switches feature a slow-make, slow-break contact mechanism. They are AC rated and are also suitable for low voltage DC rated applications. It is appropriate for usage in low voltage DC applications.

Contacts: SPDT.

Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (3/4HP 120-240VAC).

Actuator: Momentary On - Off - Momentary On.

Connection: Screw Terminals.

Operating Temperature: 0°F to 150°F (-17.8°C to +65.6°C)

Dielectric Strength: 1000V

Mechanical Life: 100,000 Cycles, Electrical Life: 25,000 Cycles

Mech: Bushing Mount 0.464" Diameter.

Mounting Hole: 0.500".

Bushing length: 0.5". Body: 1.144" long x 0.629" deep x 0.635" high.

Shaft length: 0.665".

Complete with hardware.

Alternate: 4X203.

Applications: Industrial machinery and equipment, military and commercial aviation, construction equipment, test instruments, agricultural machinery, process control, medical instrumentation.

Carlingswitch - 2FC53-73 - Switch, toggle.

SPDT.

Contact Ratings: 15A-125VAC, 10A-250VAC. 3/4HP.

Actuator: Center-Off, three position, momentary one side.

Connection: Solder terminals.

Mech: Panel mount standard 15/32" threaded bushing 0.40"L.

Note: Made in USA UL CSA.

New Old Stock

C & K Components - 7101SY9V3BE - Switch, Toggle.

Contacts: SPDT.

Contact Ratings: 5Amp 120VAC or 28VDC, 2Amp 250VAC (0.4VA 20V AC/DC).

Actuator: On-On.

Connection: PCB 3 pin.

Mech: PCB.

Panel hole: Mount frame 16.3mm long x 8.1mm wide x 11.9mm high.

Note: Non-threaded bushing: 7mm long.

Actuator: 12.0mm long.

Miniature.

NIHON KAIHEIKI IND CO LTD NNK - G-12AH-RO - Switch, Toggle.

Contacts: SPDT.

Contact Ratings: 0.4VA 28V AC/DC.

Actuator: On-None-On.

Mech: PCB, 3 contact pins, plus 2 pin mount.

Note: Right Angle Control.

Miniature.

Cutler-Hammer / Eaton - 7505K6 - Switch, Toggle.

Contacts: SPDT. (1PDT) On-None-On

Contact Ratings: 15Amp 125VAC, 10Amp 250VAC, 3/4HP 250VAC, 1/2HP 125VAC.

Contact Material: Silver-Plated Copper

Actuator: On-None-On.

Orientation: Straight

Mech: Panel, with 1/4" male Quick Connect Terminals.

Threaded Bushing.

Bushing Length: 0.469" (11.91mm)

Lever Length: 0.563" (14.3mm)

Panel Hole: 1.133" long x 0.627" wide x 0.633" high, plus terminals, bushing 0.508" long, plus actuator.

Note: All are new individually packaged with hardware.

Label is marked 7505K6 and 7505K3.

Both positions maintained.

Rohs Compliant

UL Recognized, CSA Certfied

Made in USA

CUTLER-HAMMER - 7163K2 Switch, Industrial Toggle.

Contacts: 3PDT.

Contact Ratings: 15Amp 125VAC/10Amp 250VAC.

Connection: Solder Terminals.

Mech: Panel, One hole.

Body: 1.84" long x 1.382" wide x 1.013" below panel, including terminals.

Note: Threaded bushing length: 0.460".

Actuator length: 0.662".

Additional spec's: 1HP 1-2PH 125-480VAC/1HP 3PH 125-600VAC.

New Old Stock

Cutler-Hammer / Eaton - 8788K5 - MS25072-8 Switch, toggle.

SPDT Off/ON(Mom). Heavy duty.

Plate Design: Toggle Switch

Switch Style: Toggle/Joystick

Termination: Type Screw

Contact Material: Brass

Features: Heavy Duty

Maximum Amperage: 20 A

Color: Black

Double marked 8788K5.

Mount: Panel. Two hole mount with 1.792" centers.

Dimensions: 2.147" long x 1.152" wide x 2.535" deep (behind panel).

Contacts: 3 large stud terminals.

Genuine Cutler Hammer - New Old Stock

Cutler-Hammer - Eaton - 7604K3 - Switch, Toggle. Contacts: 3PDT.

7600 Series 

Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (1HP 1-2-3PH, 115-575VAC).

Connection: Screw Terminals.

Mech: Panel Mount, Two Hole Mount at 0.873" centers.

Panel Hole: 1.861" long x 1.384" wide x 0.85" deep.

Flush Mount 1.440" long x 1.270" wide hole.

Note: Both Positions Maintained.

Genuine Cutler Hammer - New Old Stock

NSN 5930-00-410-4000

Made in USA

Eaton - Cutler Hammer - SF21SCW191 Switch, toggle.

Contacts: Miniature SPDT.

Contact Ratings: 125VAC 5Amp.

Actuator: On-On.

Connection: solder terminals.

Mech: PCB or Panel with threaded bushing.

Bushing length: 0.311".

Actuator length: 0.414".

Complete with hardware.

NSN: 5930-00-270-1674

Cutler-Hammer / Eaton - 8282K13 Switch, Toggle.

Contacts: SPDT. Full Size

Contact Ratings: 3Amp 125VAC/1Amp 250VAC.

Connection: Solder Terminals.

Switch Circuit: On - None - On

Mech: One hole threaded bushing mount/panel.

Body: 1.7" long x 0.518" wide x 0.53" high.

Note: Bushing length: 0.385".

Actuator length: 0.482".

New Old Stock - Bulk Packaged from Manufacturer

Made in USA

CUTLER-HAMMER EATON - 7613K2 - Switch, Toggle.

Contacts: 3PDT.

Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (1HP 1-2PH 125-480VAC, 1HP 3PH 125-600VAC).

Actuator: Center-off ( 3 Positions maintained).

Connection: Solder Terminals.

Mech: Panel.

Panel hole: 46.5mm long x 35.1mm wide x 21.3mm high.

Standard bushing 15/32".

Shaft 0.677" long.

Note: Heavy Duty, 1HP up to 3 Phase.

NSN 5930-00-862-4559

Complete with hardware.

Applications: For appliancews,instruments, small motor drive devices.

Genuine Cutler Hammer - New Old Stock

C & K Components - 7101L1H3ZQE Switch, toggle.

Contacts: SPDT.

Contact Ratings: 5Amp 120VAC, 2Amp 250VAC.

Actuator: On-None-On.

Connection: solder terminals.

Mech: PCB. Body: 12.8mm long x 6.8mm wide x 10.5mm high.

Threaded bushing 9.4mm long (seated).

Note: Miniature, long bat 16.1mm long, sealed contacts.

C & K Components - 7101SYCQE - Switch, Toggle.

Contacts: SPDT.

Operation: On-None-On

Contact Ratings: 5Amp 120VAC, 2Amp 250VAC.

Contact Material: Silver, Gold Plated

Electrical Life: 1000K Cycles

Temperature: -30 C to 85 C

Actuator: On-None-On.

Bushing Size: 1/4-40

Connection: PC leads.terminal Seal: Sealed

Mech: PCB.

Housing: Stainless Steel

Body: 12.7mm long x 7.0mm wide x 10.4mm high.

Note: Miniature. Threaded bushing: 0.25" D x 8.9mm long.

Actuator: 10.5mm long.

Complete with hardware.

Alternate: TE Connectivity AMP 4-1825136-1

C & K Components - T101HM9ABE Switch, toggle.

Contacts: SPDT.

Contact Ratings: 0.4VA.

Actuator: On-None-On.

Connection: PCB RA leads.

Mech: PCB.

Panel hole: 9.3mm long plus RA leads x 6.7mm deep x 12.5mm high.

Non-threaded bushing 6.8mm long.

Actuator 7.1mm long.

Honeywell Microswitch - 1NT20-7N - Switch Toggle Panel Mount, ON OFF ON,  SPDT.

Honeywell MICRO SWITCH™ NT Series toggle switches meet the need for a rugged, cost-effective toggle switch.
Quality construction features include a seal between the toggle lever and bushing, and between the cover and case.
These switches are suitable for applications in many demanding outdoor environments, where the panels are subjected to vibration from equipment, temperature extremes, dust, splashing water, and/or hose directed water.

Status: Discontinued

Commercial Grade NT Series Switch, Toggle.

Type: Pull-to-Unlock Toggle Switch

Contacts: SPDT / 3 Position.

Contact Ratings: 10Amp 125V, 250V, 277VAC.

Horsepower: 0.5HP/125VAC, 1HP 250VAC, 277 VAC

Application: Weatherproof, NEMA 3, 3R, 4, 13

Actuator: Mon-Off-Mom.

Connection: Screw. #6-32

Mech: 15/32" X 0.47" Bock Leverushing. Toggle Length - 1.05"

Panel Cutout Dimensions: Circular - 12.40mm Diameter

Bushing Thread: 15/32-32

Ingress Protection: IP67/IP68 - Dust Tight, Waterproof

Note: Black Lever Lock. Locking Lever in the Center Position.

Approvals UL, CSA

Proudly Made in USA

CUTLER-HAMMER - MS35058-31 - 8809K16 - JBT58 - Switch, Toggle.

Eaton’s military purpose switches are designed to meet the requirements of MIL-S-83731. Sealed Switches have a silicone rubber lever seal assembled between the lever and the bushing to resist the entrance of contaminants such as dust, sand or water into the contact structure. The switch mechanisms are completely enclosed to resist the entrance of contaminants into the switch. All metal parts are plated to resist corrosion. The heavy duty switches are offered in both standard toggle lever and lever lock versions. Circuit designations are stamped on the side of each switch.

SPDT On/Off/ON(Mom), 3 pos.

Double marked JBT58, Formerly Known as ST42H.

Maximum voltage: 220VAC/250VDC.

Threaded bushing length: 0.505".

Actuator: sealed 0.663" long.

Dimensions: 1.132" long x 0.627" wide x 0.664" high.

NSN 5930-00-655-1523

Contacts: 3 screw terminals.