Toggle Switch
- C & K Components - T203SY9V3GE - Switch, Toggle. DPDT Center-off. On-Off-On, 2A, 120 VAC 0.4VAIN STOCK - MORE THAN 1,000 READY TO SHIP!
C & K Components - T203SY9V3GE Switch, toggle.
T-Series Subminiature Toggle Switch
Contacts: DPDT Center-off.
Contact Ratings: 2A 125VAC/28VDC or 0.4VA low level / dry circuit,
Contact Material: Gold over Silver Contacts.
Actuator: On-Off-On.
Connection: Gold over tinned PC pins, Epoxy sealed.
mount: Vertical Mount, V-Bracket
Mech: PCB, bushing is not threaded.
Body: 0.358" x 0.40" x 1.0" above pc board.
Made in USA
- SAFRAN - EATON - CUTLER-HAMMER AEROSPACE - 8906K5354 - Switch, Toggle. DPDT, 15A, 125VAC.Special Price $24.98 Regular Price $32.50READY TO SHIP - ONLY 27 LEFT IN STOCK!
SAFRAN - EATON - CUTLER-HAMMER AEROSPACE - 8906K5354 Switch, Toggle.
Contacts: DPDT 15Amp 125VAC.
Actuator: On/Off/On (Mom).
Threaded Bushing Length: 0.418".
Actuator Length: 0.690".
Dimensions: 1.34" long x 0.896" wide x 1.002" deep.
Termination: (6) 1/4: Male Quick Connect Terminals.
Note: Environmentally Sealed Shaft.
Learn More - Carlingswitch - 2GK53-NBL3 - Model XSC1 - Switch, Toggle with Paddle, DPST 15A 125V, 10Amp 250VAC.IN STOCK - MORE THAN 100 READY TO SHIP!
Carlingswitch - 2GK53-NBL - Model 3XSC1 Switch, Toggle with Paddle.
G Series Toggle Switches Contains a slow-make, slow-break contact mechanism.
Contacts: DPST. Double Pole, On-None-Off
Contact Ratings: 15Amp 125VAC, 10AMP 250VAC, 1/2 HP 125-250 VAC
Actuator: Nylon Bat Handle. Toggle Length - .687", Bushing Length - .465"
Use .250" Tab Terminations
Note: With Hardware.
Alternates: 2GK51-NBL3, 35-3150, AML33FBA4AC01
New Old Stock
Learn More - Cutler-Hammer / Eaton - 7560K53 - Switch, toggle. DPST 15Amp 125VAC.Special Price $4.95 Regular Price $5.95Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC 1/2HP (10Amp 250VAC, 3/4HP 250VAC). Connection: screw. Mech: Panel. Body: 1.321" long x 0.747" wide x 0.735" high. Standard 15/32" threaded bushing x 0.478" long (seated 0.664" long). Note: No Bat. Learn More
- C & K Components - 7201J2ZQE2 - Switch, toggle. DPDT 5A 125V.
C & K Components - 7201J2ZQE2 Switch, Toggle.
Contacts: DPDT.
Contact Ratings: 5Amp 125V.
Actuator: On-On.
Elect config: Gold/Solder Terminals.
Mech: PCB.
Additional Information: https://www.ckswitches.com/products/switches/product-details/Rocker/7000/
Note: Mini flat paddle. Panel Mount Flange Attachment is not included.
Learn More - CUTLER-HAMMER - 7510K5 - Switch, toggle. SPDT 10Amp 250VAC.$10.00Out of stockSwitch, toggle. SPDT 10Amp 250VAC. 3 Position, center off, both sides momentary. Bushing length: 1/2". Lever length: 9/16". Contacts: 3 screw terminals. Learn More
- Cutler-Hammer Eaton - 8906K4920 - Switch, Toggle. Lever Lock, SPDT Center-Off Pull-to-Switch Momentary.Special Price $24.98 Regular Price $38.95Cutler-Hammer Eaton - 8906K4920 - Switch, Toggle. Environmental Sealed, Resistant to Dust, Dirt, Spray Extreme Temperatures Contacts: SPDT. Contact Ratings: 15A @ 125VAC, 15A @28VDC. Actuator: Center-Off. Pull-to-Switch. Momentary Both Sides. Requires 0.47" diameter hole to mount, 15-32 Bushing 32 Thread Connection: Screw Terminals with screws, black dress nut, washer, nut and locating ring. Mech: Panel Mount. Thermoset molding materials meet flame retardant requirements Temperature Range: -85°F to +160°F (-65°C to +71°C) Life: 20,000 operations at rated load 40,000 operations mechanical life Note: Must Pull-to-switch either side. Applications: Aircraft-instrument, military-purpose style. Lever lock with lever seal. Made in USA - Mil Grade Lever Lock toggle switch Learn More
- Eaton - Cutler Hammer - SF21SCW191 - Switch, toggle. SPDT 5A 125VAC. Miniature.Special Price $8.98 Regular Price $12.50
Eaton - Cutler Hammer - SF21SCW191 Switch, toggle.
Contacts: Miniature SPDT.
Contact Ratings: 125VAC 5Amp.
Actuator: On-On.
Connection: solder terminals.
Mech: PCB or Panel with threaded bushing.
Bushing length: 0.311".
Actuator length: 0.414".
Complete with hardware.
NSN: 5930-00-270-1674
Learn More - Cutler-Hammer / Eaton - 7560K6 - Switch, toggle. DPST 15Amp 125V.Special Price $7.50 Regular Price $8.99Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC 1/2HP (10Amp 250VAC, 3/4HP 250VAC). Connection: screw. Mech: panel. Body: 1.321" long x 0.745" wide x 0.738" high. Standard 15/32" threaded bushing x 0.351" long. Learn More
- Cutler-Hammer Eaton - 7506K4 - Switch, Toggle. SPST On (Momenary).
Cutler-Hammer Eaton - 7506K4 - Switch, Toggle.
The 7500 series general purpose Toggle Switch offers the widest selection of features and the design flexibility to meet a variety of applications. It is available in solder lugs, screw, 0.25-inch spade terminals.
Contacts: SPST.
Contact Ratings: 10Amp 250VAC.
Actuator: On-None-On (Mom).
Connection: Screw.
Mech: Panel.
Panel hole: 1.134" long x 0.637" wide x 0.684" high.
Standard 15/32" threaded bushing x 0.519" long (seated).
Actuator: 0.565" long.
Note: Complete with hardware.
Learn More - CUTLER-HAMMER - SF2GBX191 - Switch, toggle. DPDT 5A 125V. Center-off.$19.00Switch, toggle. Contacts: DPDT. Contact Ratings: 5Amp 125VAC. Actuator: Center-off. Connection: solder. Mech: Panel. Body: 13.0mm long x 12.0mm wide x 13.6mm high plus contacts. Threaded bushing 12.0mm long. Actuator 12.0mm long . Note: Complete with hardware. Learn More
- CUTLER-HAMMER - MS35059-25 - Switch, toggle. DPDT MOM.(N.C.) 15Amp 125VAC.Special Price $27.95 Regular Price $34.99Switch, toggle. Contacts: DPDT MOM.(N.C.). Contact Ratings: 15Amp 125VAC. Actuator: On-(Off). Connection: screw terminals. Mech: Panel, bushing. Panel hole: 1.34" long x 0.78" wide x 0.738" deep, plus terminals.. Note: Standard 3/8" D bushing x 0.467" long (0.647" long seated). Actuator extends 0.705". Up position MOM. Double marked 8828K25. Learn More
- Cutler-Hammer / Eaton * - 8810K10 - Switch, toggle. SPST MON.(N.O.) 5Amp 125VAC.$14.50Switch, toggle. Contacts: SPST.MOMENTARY (N.O.) Contact Ratings: 5Amp 125VAC. Actuator: Off-(On). Connection: screw terminals. Mech: Panel, bushing. Panel hole: 1.143" long x 0.633" wide x 0.62" deep, plus terminals. Note: Standard 3/8" D bushing x 0.387" long (seated). Actuator extends 0.664". Learn More
- Cutler-Hammer / Eaton * - 7510K9 - Switch, toggle. SPDT 10Amp 250VAC.$10.00Switch, toggle. SPDT 10Amp 250VAC. 2 Position, On/None/ON(Mom). Bushing length: 1/2". Lever length: 9/16". Contacts: 3 - 1/4" quick connect terminals. More info: Page 154 http://www.eaton.com/ecm/groups/public/@pub/@electrical/documents/content/pg07002001e.pdf Learn More
- Eaton - Cutler Hammer - 8376K1 - Switch, toggle. DPST 5Amp 125VAC.Special Price $12.98 Regular Price $15.00
Eaton - Cutler Hammer - 8376K1 Switch, toggle.
Contacts: DPST.
Contact Ratings: 5Amp 125VAC.
Connection: Solder.
Inclosure: Fully Inclosed
Mech: Panel, Bushing.
Panel hole: 1.161" long x 0.697" wide.
Note: Standard 3/8" D bushing x 0.552" long.
NSN: 5930-01-076-6448
Made in USA
Learn More - CUTLER-HAMMER - 8290K116 - Switch, toggle. SPST 3Amp 250VAC.$19.50Switch, toggle. Contacts: SPST. Contact Ratings: 3Amp 250VAC. Connection: wire leads. Mech: Panel, bushing. Panel hole: 1.008" long x 0.516" wide. Note: Standard 3/8" D bushing x 0.473" long. Learn More
- CUTLER-HAMMER - 7580K9 - Switch, toggle. 3PDT C.O. 15Amp 125VAC.Special Price $14.98 Regular Price $17.99Out of stockSwitch, toggle. Contacts: 3PDT.C.O. Contact Ratings: 15Amp 125VAC (10Amp 250VAC, 1HP 1-2-3PH, 115-575VAC). Actuator: On-Ctr, Off-On. Connection: solder. Mech: Panel, 2 hole flange at 0.871" centers. Panel hole: 1.864" long x 1.390" wide x 0.819" deep, plus terminals. Note: 3 Position. Actuator extends to 0.800" from front mount flange. Learn More
- EATON - CUTLER-HAMMER - 8821K6 - Switch, toggle. DPDT 15A 125V.Special Price $14.98 Regular Price $15.95READY TO SHIP - ONLY 19 LEFT IN STOCK!
EATON - CUTLER-HAMMER - 8821K6 - Switch, toggle.
Contacts: DPDT.
Contact Ratings: 125VAC 15Amp.
Actuator: On-Off-On.
Connection: solder terminals.
Mech: panel, single hole mount 15/32 - 32 threaded bushing.
Panel hole: 1.323" long x 0.750" wide x 0.767" deep.
Note: Center off. Bushing length: 0.465" long.
Actuator length: 0.668" long.
Double marked ST52P.
Learn More - Carlingswitch - 2FB53-73 - Switch, toggle. SPDT 15A 125VAC.Special Price $3.71 Regular Price $4.95Switch, toggle. Contacts: SPDT. Contact Ratings: 15Amp/125VAC. Actuator: On-On. Mech: panel, 3/8" bushing. Body: 1.14" long x 0.64" wide x 0.615" high. Panel hole: Contacts: pcb terminals. Note: Bushing length: 0.517" (13.2mm). Actuator length: 0.683" (17.3mm). Learn More
- NIHON KAIHEIKI IND CO LTD - NKK - M2033SS1W40 - Toggle. DPDT-6A Toggle Switch 3-PositionSpecial Price $6.98 Regular Price $8.50
NIHON KAIHEIKI IND CO LTD - NKK - M2033SS1W40 - DPDT-6A Toggle Switch
NKK Switches M Series miniature PCB toggle switches feature several distinguishing characteristics such as a high torque bushing construction to prevent rotation or separation from the frame during installation, an anti-rotation design on all non-cylindrical levers, an interlocked actuator block to prevent switch failure due to biased lever movement, and stainless steel construction to resist corrosion.
- Anti-jamming design protects contacts from damage due to excessive downward force on actuator
- High torque bushing construction prevents rotation or separation from frame during installation
- High insulating barriers increase isolation of circuits in multi-pole devices and provide added protection to contact points
- Molded diallyl phthalate case has a UL flammability rating of 94V-0
- Epoxy sealed terminals prevent entry of solder flux and other contaminants
- Prominent external insulating barriers increase insulation resistance and dielectric strength
- Interlocked actuator block, lever and interior guide prevent switch failure due to biased lever movement
- Clinching of frame to case well above base and terminals provides 1,500 V dielectric strength
M Series Mini Toggle Switch
Switch function: ON-OFF-ON
Voltage Rating: 125VAC / 30 VDC
Current Rating: 6A AC/3 A DC
Contact Material: Silver
3-Position Miniature Right Angle w/Hardware.
Panel / PCB Mount
6-Solder Terminals
Made in Japan
Learn More - Cutler-Hammer / Eaton - T8201 - Switch, toggle. DPDT. PCB.$6.99Switch, toggle. Contacts: DPDT. Contact Ratings: 125VAC 1Amp. Actuator: On-None-On. Connection: 4 Pin PCB pins. Mech: PCB . Body: 15.4mm long plus bat x 10.1mm deep x 6.7mm high. Note: RA Actuator RED. More info: http://www.electro-nc.com/miniature/minp48.pdf Learn More
- Cutler-Hammer / Eaton * - 8805K5 - Switch, toggle. SPDT 10A 125VAC.$12.95Switch, toggle. Contacts: SPDT. Contact Ratings: 10Amp 125VAC. Actuator: On-On (Mom). Connection: solder terminals. Mech: Bushing 15/32" - 32 thread. Body: 1.138" long x 0.643" wide x 0.644" high plus terminals. Note: Only marked ST42F. Learn More
- CUTLER-HAMMER - 8381K22C - Switch, toggle, RED bat. SPST 6A 125V.$3.99Switch, toggle, bat. Contacts: SPST. Contact Ratings: 6Amp 125VAC. Connection: solder terminals. Mech: Single hole bushing mount. Note: Bat / actuator: red. Bushing length: 0.342". Learn More
- Cutler Hammer - SF24STW191 - Switch, Toggle, min. 4PDT 6A 125V.
Cutler Hammer - SF24STW191 - Switch, Toggle, Miniature.
Contacts: 4PDT- Special Circuitry.
Contact Ratings: 6A-125VAC.
Actuator: 3-Positions.
Connection: Silver-Plated Solder Terminals. 12 Solder Terminals
Mech: Panel mount, 0.25" threaded bushing x 7.7mm long. Body: 0.51" x 0.88" x 0.68" behind panel.
Note: Center-On, Alternating on: Poles 1&2, Poles 2&3, Poles 3&4 work in the three positions.
Genuine Cutler Hameer - New Old Stock
Alternate: APEM 5266AB
Learn More