Terminal Blocks

Connector, terminal block. Circuit count: 17 position with only 9 contacts. Mounting type: Mount to a 90 deg 17 Position header, not included. Connection: screw terminals. Outside dimensions: 3.390" long x 0.726" wide x 0.724" high. Note: RA wire entry. Learn More

Connector, terminal block. Circuit count: 3 Position. Contact ampacity: 20Amp. Insulation voltage: 300V. Mounting type: PCB or Panel. Pin spacing: approximately 0.375". Connection: Top screw, bottom 3 PCB pins. Outside dimensions: 1.962" long x 0.633" wide x 0.755" above board. Two hole mount at approximately 1.475" centers. Note: Wire size: 12-22AWG. Series 37000/38000. Learn More

Connector, terminal block. Circuit count: 14 position. Mounting type: thru board. Connection: one side has (14) 1/4" (M) RA contacts. Outside dimensions: Overall 6" long x 1" wide. Learn More

Connector, terminal block. Contact gender: 10 x 2. Four hole mount: 3.60" centers. Pin spacing: 0.375" (9.5mm). Outside dimensions: 3.896" long x 1.135" wide x 0.743" high w/o rear connector. Note: With 20 pin IDC male ejector-latch header on rear. Learn More

Connector, terminal block. Circuit count: 10. Mounting type: plug-in. Pin spacing: 5mm. Connection: screw. Outside dimensions: 1.988" (50.7mm) long x 0.718" (18.2mm) wide x 0.591" (15.0mm) high. Note: Euro. Color: green. Learn More

Connector, terminal block. Type UK3-Return, 2 position. Mount: din rail. With 2 each contact pins. HC-D-STC 1.5 crimp. Current - IEC 32A, Current - UL 20A. Width 5.2mm. Termination Style Screw. Type Single Sided. Voltage - IEC 500V, Voltage - UL 300V, Wire Gauge or Range - AWG 12-30 AWG. Color: gray. Learn More

Connector, terminal block. Housing gender: plug. Contact gender: male. Circuit count: 17. Contact ampacity: 12Amp. Insulation voltage: 320V. Mounting type: Open-ended, straight. Pin spacing: 5.00mm. Learn More

ON-SHORE TECHNOLOGY INC - ED130/6DS Connector, Terminal Block, Wire to Board.

Circuit count: 6 Pole, 300V 10Amp.

For 14-22AWG wire.

Mounting Type: PCB with 5.00mm pin spacing.

Connection: Screw.

Outside Dimensions: 1.214" (30.8mm) long x 0.534" (13.5mm) wide x 0.429" (10.9mm) high.

Note: Right Angle Exit.

Type: One Piece.

Style: Wire Protector.

Color: Blue.

Alternate/Equivalent: TE Connectivity1776263-6 

Learn More

Connector, terminal block. Circuit count: 3 position (2 x 3). Connection: screw . Outside dimensions: 1.788" long x 1.254" wide x 1.141" high. Note: Three RA exits each side. Learn More

CINCH JONES - G176-2 - 6-176-2  - Terminal /Barrier Block, 6 Position, Single Row, DIP SOlder

Status: Discontinued

Series 176 with Mounting Ears

Voltage Rating: 250V

Current Rating: 15A

Max. Wire Size: 16 AWG

 6-POS TERMINAL BLOCKS

Terminals: Brass, Nickel Plated

New

Learn More

CINCH - 7-140 Connector, Terminal Block.

Circuit count: 7 Position, dual row.

Contact ampacity: 15Amp.

Insulation voltage: 250V.

Mounting type: PCB, 4 hole with 3" centers.

Connection: Screw, 16-22AWG.

Outside dimensions: 3-5/16" long x 7/8" wide x 0.415" (10.5mm) high.

Note: Dual row. Series 140.

More info: http://www.cinch.com/products/electronic-communication-systems/barrier-blocks/series-140

Learn More

Connector, terminal block. Contact gender: 10 x 1. Insulation material: phenolic. Pin spacing: 0.370" (9.4mm). Connection: pcb pins and screw terminals. Outside dimensions: 3.815" long x 0.632" wide x 0.652" high. Note: NC6 Series (NC6-P107-10). Learn More

Connector, terminal block. Circuit count: 4 Position 2 level. Contact ampacity: 25A. Insulation voltage: 500V. Insulation material: Polyamide, nylon. Mounting type: Din rail. Pin spacing: 6.2mm. Connection: screw. Note: 28-10AWG. Color: gray. Alt P/N: UKK7. More info: http://www.phoenixcontact.com Learn More

Connector, terminal block. Circuit count: 5 Position. Mounting type: through hole. Pin spacing: approximately 9.5mm. Connection: screw. Outside dimensions: 68.3mm long x 16.8mm wide x 19.2mm above board. Note: Color: black. Learn More

Connector, terminal block. Circuit count: 6 Position. Connection: Screw terminals, RA crimp. Outside dimensions: 31.6mm long x 12.6mm wide x 24.5mm high. Note: Brown. Eurostyle. Learn More

Connector, terminal strip. 10 Position, single row. Material: heavy plastic. Mount: PCB through hole. Dimensions: 0.729" wide x 5.191" long x 0.541" above board. Learn More

Connector, terminal block. Circuit count: 7 Position (Dual). Insulation material: Solid construction, plastic phenolic, black. Mounting type: PCB or Panel, flush. Connection: screw. Outside dimensions: 3.838" long x 1.144" wide x 0.536" high. With four hole mount at 3.55" centers. Note: Used/Removed from equipment. Learn More