|
|
JOHNSON
HC615LG
|
Motors, DC. Permanent magnet 18VDC, 100mA, 3500 RPM no load. Torque constant: 49.4 m/Nm/Amp. Dy. Res: 6.84 ohms. Motor Regulation: 28RPM/m-NmTorque: 126m-Nm 2.63Amp at stall. Maximum efficiency: 68%. Torque: 20m-Nm, speed: 2944RPM, current: 0.51Amp, output: 6.17 watts. Maximum power: Torque: 62m-Nm, speed: 1753RPM, current 1.37A. Output: 11.47 watt. Reversible ARM permanent magnet motor. Shaft Length: 11mm 0.435", shaft diameter: 3.1mm 0.125". Has an attached pulley: 10mm 0.39" inside diameter x 4.6mm 0.18" inside length. Motor: 38mm 1.495" D x 83mm 3.27" long overall. Rotation: clockwise when viewed from shaft output end with positive applied to positive. Weight: 8 oz.
|
Un-used but old
|
$5.00
|
|
|
|
MERKLE-KORFF
EYQM-63264-15-2
|
Motor, PM. Ratings: 12VDC reversible, 8400RPM no load. Works on 2V and above 1.2"OD x 2.75" with magnetic tachometer 5500rpm under a light load. Tc: 1.6 oz-in. Ts: 7 oz-in. Kt:1.94 oz-in/A Po 7.7W Rt:4.65-OHM. No info on the tachometer. Motors are marked S0878B. Weight: 5 oz. Note: Some may have a 7.7mm brass gear with 8 teeth.
|
In Mfr Packaging
|
$9.99
|
|
|
|
ESCAP
23-D-21-213-B2X2
|
Motor, DC. Supply: 1-36VDC. Speed: 100 to 12000. Mech. Mtg: Two holes for the motor and six holes/pins for feedback information. Body Dimensions: 23mm D x 60mm, plus shaft - 3mm D x 20mm long. Note: Precision DC Motor & Tachometer. Specification sheet available.
|
New (un-used)
|
$24.95
|
|
|
|
Buehler
507104 series
|
Motor, DC. Supply: 6 - 24VDC 200-300mA. Torque: relatively high. Direction: Reversible by switching polarity. Wire count: Two 16" long wires with connector. Body Dimensions: 40mmD x 64mmL. Shaft Dimensions: 4mm shaft 19mm long and flattened shaft 20mm long. Weight: 9 oz.
|
New (un-used)
|
$14.95
|
|
|
|
REGAL
DE-25L-0001 KP63MT014
|
Motors, AC/DC. Universal 120V, high speed. Works at 12V+ approximately 150RPM, 12V 200mA AC with bridge rectifier or DC reversible.
|
New (un-used)
|
$4.95
|
|
|
|
ESCAP
PL-11-219-119 Series28
|
Motor, DC. Supply: 3VDC 50mA. Body Dimensions: 28mm OD each motor. Assembly: 6 x 5 x 3". Note: Data cassette drive. Pair of precision motors. Series: 28. MFE 250BA 10-IPS 8000-BPS.
|
Removed from equipment
|
$19.00
|
|
|
|
Minimotor SA
8-334
|
Motors, DC. Precision cassette drive assembly. Used. Older with four Swiss & German made motors: German 330/5055-150 22mm OD x 46mm. 330/507-150 22mm OD x 46mm including 2mm D shaft. 330-509 22mm OD x 43mm. And a 16mm geared Swiss Model 050/0055-095-485.1 200cmp MiniMotor SA 42mm Long with the 2mm shaft. All permanent magnet and reversible. You dis-assemble.
|
Removed from equipment
|
$39.95
|
|
|
|
Buehler
13.65.36
|
Motors, DC. High speed permanent magnet motors 6-24VDC, tach output. Disc drive replacement 10,000 RPM MAX. 2-IN-OZ. Dimensions: 1.38" D x 2.7" long, with pulley on shaft. Also useful as generator / wind speed indicator anemometer and science fair projects. Weight: approximately 8 oz.
|
New (un-used)
|
$17.97
|
|
|
|
Johnson
1342284
|
Motor, PM DC, 9-15V reversible. Draws about 100mA A 120VAC, no load. The EMI filter is completely insulated. Unloaded speed: 9VDC 750RPM - 12VDC 1250RPM - 15VDC 2000RPM. Dimensions: 18mm x 23.3mm x 51mmL (including shaft 7.5mm length / 1.9mm dia.) Weight: 9 oz.
|
New (un-used)
|
$3.75
|
|
|
|
Buehler
1.13.043.218-9 3140-0858
|
Motor, DC PM. Supply: 3-24VDC. Wire count: 23 inch twisted pair leads. Body Dimensions: 1.58"D x 4.16"Long overall. Shaft Dimensions: 3.9mm shaft and attached pulley 0.32"ID. Note: 19.1VDC Reversable High-efficiency Motor. 50-100mA. 1.13.043.218-9 3140-0858.
|
Un-used but old
|
$9.95
|
|
|
|
Honeywell/Microswitch
33VM82-020-11
|
24VDC Control Motor 5.7Oz-In/Amp Torque Constant. Rotor Inertia: 60 Oz-In-Sec*Sec 6.6Amps RMS. Terminal Resistance 85-Ohms. 4"OD x 6.4" long including DC ANALOG TACHOMETER: Voltage Constant: 2.5V/KRPM. Terminal Res: 50-Ohms. Voltage Ripple: 1.5% P-P with 0.5" Dia shaft with 1.6" dia rubber? wheel.
|
Used
|
$269.55
|
|
|
|
Buehler
1.13.043.242
|
Motors, DC. 12VDC 2300RPM useable to 24VDC 4700-RPM-Unloaded. Reversible. Dimensions: 40mm D x 83mm long, with 50mm long 4mm steel shaft. Front ball bearing, rear sleeve bearings. Three threaded mounting holes in front, 3" wire leads.
|
Good
|
$12.95
|
|
|
|
Buehler
1.13.022.212.04
|
Motor, DC and assembly. 12VDC 40mA 51RPM. Assembly with gold brass worm gear driving white plastic two-tiered gear driving a 50mm black plastic gear with a 8.3mm plastic nib to provide reciprocating action, 1/2" radius of rotation on nib. Motor: 31mm diameter, 2 wire with 3: leads. Steel mounting bracket. No Load 860mA-Stall, 104RPM-24V 50mA 1.7A stall. Weight: 3/4-pound Dimensions: overall 5.5" x 3" x 2" high.
|
Used
|
$19.88
|
|
|
|
MABUCHI
RS-85
|
Motor, DC. Reversible 6VDC 2Amp 7600RPM. Dimensions: 1.85" OD; length 2.75"; shaft 0.60". With wire leads. Note: RS-85 Series.
|
New (un-used)
|
$12.99
|
|
|
|
MAXON
46.032.032-22.00-125
|
BEAUTIFUL HIGH TORQUE, VERY HIGH EFFICIENCY small DC Motor. Started turning at less than a Volt ! APPROX 25RPM at 6VDC (nobody has a watch anymore) 32mm dia x 113mm long plus 17mm long shaft w/flat 6mm diameter.
|
New (un-used)
|
$189.00
|
|
|
|
Leeson
C4T34DC1B
|
1/2HP 3450/2850RPM JS56C.DP 208-230 volts 60/50 HZ cont duty
|
Used
|
$50.00
|
|
|
|
ESCAP
26 c28 210 1
|
PM DC escap Motor 1.0"OD Precision for GOULD/Brush Chart Recorders C282101
|
New (un-used)
|
$49.00
|
|
|
|
Barber Coleman
CYQM-23360-3-4
|
Motor, DC. 24VDC 4750RPM. Reversible. 2 Wire output of about 24VAC at full speed which could be used a tachometer. Dimensions: 2" OD x 3.03" long including shaft 0.125" D.
|
In Mfr Packaging
|
$19.00
|
|
|
|
Johnson
HC315XLG
|
Permanent Magnet - Reversable - MOTORS 6-24VDC Miniature Motor 0.09" SHAFT 0.60" long with removable brass gear - 1.14"OD x 2.12" Long w/ bushing + 0.6" long shaft
|
New (un-used)
|
$12.95
|
|
|
|
Unmarked
30701
|
Motor, DC. 1-3VDC, 15,500-RPM, approximately 1 Amp. Dual shaft 2.3mm 15mm long. Reversible PM. Dimensions: 27.5mm/1.08" OD x 1.47" long excluding shafts. Relatively high torque.
|
New (un-used)
|
$2.99
|
|
|
|
FINCOR
5002441
|
Motor, DC. Supply: 180VDC. N/P Current: 2.1A-Armature, PM-Field. Speed: 1725 RPM. 1/3 HP. Frame Size: TENV. Note: Class:F Continuous duty. Used, has pulley attached. 9303318TN. Fincor.
|
Used
|
$175.00
|
|
|
|
Baldor
CDP3436
|
Motor, DC. Supply: 180VDC 3.7A Armature. Speed: 1750 RPM. HP: 3/4. Frame Size: 56C TEFC. Note: 40C-ambient. Continuous duty Supply FF1.3 BRG:6203 Brush: 2/BP5000AW14 Spec:34-5990-3946 type PH3428P. Looks new.
|
Used
|
$544.99
|
|
|
|
Buehler
1.61.031.111.06
|
Motor, DC Gearhead. Ratings: 10RPM 6VDC, 21RPM 12VDC and 42RPM 24VDC, 300mA with no load. High torque 90 Deg. Right-angled gearhead DC. Dimensions: 54mm D x 161mm long including removable / reversible 8.1mm [0.321"] D steel shaft, 2" long inside collet. With removable 2-point mounting bracket, wire leads. Note: 4.5A Stall @ 12V. Weight: 3 lbs.
|
Used
|
$47.98
|
|
|
|
Leeson
CM24D25NZ9B
|
Motors, DC. Gearhead 90VDC 1.2Amp 1/17HP, right-angle dual shaft (1/2"), 42RPM. Duty cycle: 15-minutes, ratio: 60:1. TENV-Encl 9"L x 2.25"OD, black. Note: CatNo: M1115033.00. New, but may have a few cosmetic imperfections, such as shaft may have slight rust due to condensation.
|
New (un-used)
|
$35.00
|
|
|
|
CLIFTON
AS-718-013
|
Motor, DC. 4P 3-24VDC, dual shaft, one end threaded for 5/40, 200ma@12vdc and 400ma @ 24vdc.
|
Un-used but old
|
$7.50
|
|
|
|
PITTMAN
MT9423C849
|
Motor, DC. 24VDC. Motor with shaft measures 1-5/8" D x 4 3/8" long.
|
New (un-used)
|
$39.00
|
|
|
|
JOHNSON
1030361
|
Motor, DC. With Super-Cap Drive Assembly: Internal assembly of a battery operated cutting tool. 7.2VDC motor is paralleled by three series connected Super-Caps (10F @ 2.5VDC each) to form an overall capacitance of 3.3F @ 7.5VDC). There are also three switches and a high brightness LED. Note: With the motor disconnected, and the capacitors charged to 7VDC, the LED will be brightly illuminated for longer than 10 minutes.
|
Removed from equipment
|
$9.99
|
|
|
|
Warner Electric
BCD56RD417
|
Motor, DC. Supply: 180V 5.1A-Armature 200V 0.4A-Field. Speed: 1725 RPM. Horsepower 1.0 Keyed shaft MOH2210100. Dimensions: Overall 6.5" D x 13.25" long. Shaft: 5/8" D x 2" long. NIB. Note: (Not a permanent magnet motor).
|
In Mfr Packaging
|
$289.00
|
|
|
|
Oriental Motors
0GN30KA
|
1.65" [42mm square] for GN-type pinion shaft motors. Ball Bearing - GN gearhead Parallel Shaft (30:1) -
Parallel Shaft Gearhead for use with a wide variety of motors.
|
New (un-used)
|
$59.00
|
|
|
|
Oriental Motors
2GB50KA
|
Parallel Shaft Gearhead for use with a wide variety of motors.
|
New (un-used)
|
$69.00
|
|
|
|
Oriental Motors
2GB18KA
|
GEARHEAD for ORIENTAL MOTORS 18:1 New, in box with M4P0.7 cross-recessed head machine screws 13-In-Lb-max
|
New (un-used)
|
$55.00
|
|
|
|
Reliance Electric
T56H1033T-NR
|
180VDC 1HP TENV MOTOR 1725 RPM TOTALLY ENCLOSED NON VENTED.
LOOKS IN GOOD COND.
|
Removed from equipment
|
$300.00
|
|
|
|
FAULHABER
2657W024CR 134:1
|
Reversable PM geared motor. Pretty blue gear drive made in Switzerland, powerful rear end motor made in Germany. 57mm diameter Flange 4-hole mount. Motor & Gear drive 154mm Long including 8mm flattened shaft 18mm long. Ratio 134:1 = 7RPM
|
New (un-used)
|
$288.97
|
|
|
|
Buehler
1.61.046.531.00
|
Steel Bracket 9.4" x 6" with HeavyDuty 31mm dia BUEHLER motor with GearHead Assembly Forcefully driving a 110mm Long Lead Screw 9.5mm diameter. Max travel as assembled . . . Plastic Traveller with removeable steel bracket. Approximately 100 RPM at 6VDC - With optical tachometer, 3-wire cable & connector - No Spex.
|
New (un-used)
|
$38.99
|
|
|
|
PITTMAN
MT8312E721
|
Motor, DC. 24VDC. Dimensions: 1.18" D x 3.9" long plus shaft 0.162" D x 0.490" long.
|
New (un-used)
|
$39.00
|
|
|
|
PITTMAN
9513B815
|
Motors, DC. Military NSN 6105-01-152-2800. 12VDC. Double marked 880023.
|
In Mfr Packaging
|
$77.99
|
|
|
|
Barber Coleman
FYQM63200-25
|
Motor, DC. Supply: 12V. N/P Current: 150mA. Speed: 1200. Body Dimensions: 1.25" D x 2" long. Note: Reversible (PM) permanent magnet.
|
New (un-used)
|
$8.95
|
|
|
|
Unmarked
8-947
|
Motors, DC. 12VDC.
|
Un-used but old
|
$3.00
|
|
|
|
Matsushita
6-231
|
Motor, DC. 4.5VDC - 6.5VDC.
|
Used
|
$2.50
|
|
|
|
Buehler
10075875
|
Motor, DC. Supply: 6-24VDC. Note: Permanent magnet with tach. High speed, reversible, 4 wire with a 4 position female rectangular connector.
|
New (un-used)
|
$19.99
|
|
|
|
Bowmar-Harowe
83036-01
|
Motor, DC permanent magnet. Supply: 3-18VDC. Direction: reversible 4-pole. Wire count: eight teflon wires. Mech. Mtg.: 2 flush mount brackets on the bottom. Shaft dimensions: partially threaded 0.123"D shaft is 0.43"L. Note: With optical tachometer, no spec available. Very high efficiency for popular daisy wheel printers.
|
Un-used but old
|
$25.00
|
|