AC Motors - Gearmotors

BREVEL PRODUCTS - 311282 - 24V AC Motor - 3 RPM, 60Hz, High Torque.

Brevel Motor - Model R. With 0.32" / 8mm Slotted shaft.

Ideal Display Rotation Speed of 3 Revolutions every minute.

Dimensions: 2.9" x 3.2" x 3" behind panel, mounts with four threaded holes 2.4'" apart.

Weight 2 pounds each.

New Old Stock

TRW/GLOBE - CMC144A152 Motor, AC. 1PH 38-46VAC 60Hz, 3600RPM.

Hysteresis Synchronous with Capacitor, 12uF included.

3 wire leads, teflon, 14" long.

Dimensions: 30mm D x 74mm long, including shaft.

With 7.5mm D gear.

Mounts on 2 threaded holes 21.7mm centers.

Note: Western Electric P/N: P-21F345.

Made in the USA.

New Old Stock.

JAPAN SERVO - 127PS1176 U129A-119 - 060485 - Motor, AC.

Input Power: 115VAC 0.7Amp

Speed: 20 RPM.

Capacitor 8uF required, included.

Duty Cycle =2.5 Sec. ON/60S OFF

Type U129A-119.

5 Watts out has thermal cutout which will cutout motor if ran for 1-1-1/2 min.

MFG P/N 060485.

New Old Stock

JAPAN SERVO - KS7P8-11 - P/N 6813649 Motor, AC geared.

Synchronous 25V 50/60Hz

Speed: 250/300RPM.

Requires 20uF capacitor (included).

On a 2.78" Square Plate with 4 mounting holes 2.2" apart.

Shaft: 1/4"shaft x 0.6" long and has a gear 0.49" D.

Motor is 1.6" behind plate.

Maybe replaced with p/n 6813649.

Very Old Stock

Made in Japan

HAYDON - 36890-60 - 120VAC 60RPM MOTOR for Chart Recorders

1/8"-Shaft 2" X 1.25" X 1.75" GOULD / BRUSH PLASTIC GEARS IN METAL HOUSING

Hansen Synchron - A12RC-6 Motor, AC Timing.

Synchron 600 Series, Shallow Pear Shaped Gearbox timing motors are the industry leader. The Hansen Synchron motor distinguishes itself with low noise levels and a robust, precision gear train. The motor is permanently lubricated and requires no maintenance during its lifetime. Gear material has been selected for the quiet operation and long life required in time measurement instrumentation and event recording applications.

Permanently Lubricated requiring no maintenance.

Synchronous 110V 60Hz 3 watt 300RPM.

Starting torque: 20 in-oz

Teardrop shaped with D-Shaped Shaft and 2 Tab mounting

Dimensions: 1.970 Diameter long x 1.875" wide x 1.375" max high.

Shaft: 0.128" (3.175mm) D x 9.1mm long.

Looking at the shaft it turns Clockwise

Includes attached Red, Blue, Green - Color Wheel Assembly.

High Quality Used in Colorimeter Chromascans.

Condition: Removed from New Equipment.

Proudly Made in USA