Stepper Motors

Filter  
Manufacturer  
Unit of Measure  
Price  
View as List Grid

Items 1-24 of 70

Page
per page
Set Descending Direction
  1. PORTESCAP - GC26M048A30V - Motor, Stepper. 5V, 10:1 gear box, 4 Phase 6 wire.
    PORTESCAP - GC26M048A30V - Motor, Stepper. 5V, 10:1 gear box, 4 Phase 6 wire.
    Special Price $16.98 Regular Price $22.95 As low as $10.98
    IN STOCK - MORE THAN 100 READY TO SHIP!

    PORTESCAP - GC26M048A30V Motor, Stepper.

    Tiny 5V miniature, with heavy 10:1 gear box.

    4-Phase 6-wire UniPolar,

    Dimensions:only 1.1" [28mm] x 1.43" [36.2] x 1" [25.4]

    Shaft: 3mm knurled shaft 7.5mm long.

    Mounts on two threaded holes on 30mm centers.

    RoHS Compliant.

    Note: Danaher / Portescap.

    Weight: 1.8 oz.

    Learn More
  2. Siemans AIRPAX - L82401-P2 - Permanent Magnet Stepper Motor, 12VDC 52 Ohm, 7.5 Degree Step Angle.
    Siemans AIRPAX - L82401-P2 - Permanent Magnet Stepper Motor, 12VDC 52 Ohm, 7.5 Degree Step Angle.
    Special Price $18.98 Regular Price $26.95 As low as $12.98

    Siemans Airpax - L82401-P2 Motor, Stepper.

    Commercial Series High quality Permanent Magnet Stepper Motor with 7.5 degree step angle. The motors may be fitted to a gearhead where increased torque and resolution are required at reduced operating speed. Four phase motor suitable for use with uni-polar drive circuits. Ideally suited to instrumentation applications.

    DC Operating Voltage: 12VDC

    Resistance per Winding 52 ohm.

    Steps per Revolution: 48 

    Resistance per Coil: 9.1 Ohm 

    Step Angle: 7.5 degrees.

    Connections: 6 Wires

    Holding Torque: 4.5 Ncm

    Mounting: 1-3/8" Hole Spacing.

    Rotor Inertia: 0.0118 Kgcm2

    Current per Phase: 0.16 Amp

    Inductance per Phase: 37.7 mH

    Max. Operating Temperature: 100 C

    Ambient Operating Temperature: -20 C to 70 C

    Bearing Type: Sintered Bronze Sleeve

    Body: 42mm Diameter.

    Shaft: 3mm Diameter x 9.6mm Long.

    Mount Plate, 4 holes, 35mm centers.

    Weight: 4.8 oz.

    Made in Malaysia

    New Old Stock

     

    Learn More
  3. SUPERIOR ELECTRIC CO. - SLO-SYN - MP70-1A-A4-9Z-025 - Motor, stepper. 15V 4 phase 0.49Amp.
    SUPERIOR ELECTRIC CO. - SLO-SYN - MP70-1A-A4-9Z-025 - Motor, stepper. 15V 4 phase 0.49Amp.
    Special Price $16.98 Regular Price $24.95
    READY TO SHIP - ONLY 44 LEFT IN STOCK!

    Motor, stepper. 15V 4 phase 0.49Amp. 48 step/rev. 8 wires.

    The SLO-SYN motor is unique in that it has the capability of being operated as an AC synchronous, constant speed motor or as a phase switched DC stepper motor. In either case, it is classified as a permanent magnet inductor motor.

    Danaher Motion - SLO SYN product line is not out of manufacture. 

    Mounting: 2.2" hole spacing.

    Body: 2.75" square (70.5mm) x 1.75" high (46mm).

    Shaft: 1/4" D x 0.63" L.

    Weight: 1.3 lbs (22 oz).

    Note: Slo-Syn.

    Very compact for amount of torque. 8-wire = 4-phase = Unipolar.

    Made in USA

    Learn More
  4. SUPERIOR ELECTRIC CO. - SLO-SYN - MP70-9A-Z9-9Z-017 - Motor, Stepping. 5.2VDC 1.44Amp.
    SUPERIOR ELECTRIC CO. - SLO-SYN - MP70-9A-Z9-9Z-017 - Motor, Stepping. 5.2VDC 1.44Amp.
    Special Price $18.98 Regular Price $24.50 As low as $14.98
    IN STOCK - MORE THAN 100 READY TO SHIP!

    SUPERIOR ELECTRIC CO. - SLO-SYN - MP70-9A-Z9-9Z-017 Synchronous Stepping Motor, 5.2VDC 1.44Amp. 48 step/rev.

    Superior Electric is recognized worldwide as the leading manufacturer of step motor positioning systems. Over 40 years ago, Superior Electric developed and patented their SLO-SYN® Step Motor products.

    The SLO-SYN motor is unique in that it has the capability of being operated as an AC Synchronous, constant speed motor or as a phase switched DC stepper motor. In either case, it is classified as a permanent magnet inductor motor.

    Status: Danaher Motion - This SLO-SYN P/N is Discontinued.

    Slo-Syn. 8-Wire 4-Winding.

    Rating: 5.2 V@1.44 Amps

    48 Steps per Revolution

    Very High Torque.

    Bobbin Wound Stepping Motor. Patent 4,349,957

    Mounting: 2.28" Hole Spacing.

    Body: 2-3/4" D x 1.7" L.

    Shaft: 0.25" Diameter w/flat 0.6" Length

     2.75" Square Mounting Plate with 4 holes with Threaded inserts, about 2.28" apart.

    Very compact for amount of torque. 8-wire = 4-phase = Unipolar.

    Weight: 1.5 lb (23 oz).

    New Old Stock

    Made in Japan

    Learn More
  5. SEIKO EPSON - EM462 - Stepper motor 42mm Dia 4-wire
    SEIKO EPSON - EM462 - Stepper motor 42mm Dia 4-wire
    $4.95
    Stepper motor for Epson 4-Wire Two 9-Ohm Coils on ribbon cable - 1.65"/42mm Diameter - 24mm tall - mounts on two holes 50mm apart - gear on 2.9mm shaft is 8mm Diameter - NEW Learn More
  6. Applied Motion Products Inc  - 4017-838 - 776619324 - Precision Unipolar Stepper Motor 12V 3.6 Deg 4-Phase
    Applied Motion Products Inc - 4017-838 - 776619324 - Precision Unipolar Stepper Motor 12V 3.6 Deg 4-Phase
    Special Price $14.98 Regular Price $24.95 As low as $12.98
    IN STOCK - MORE THAN 100 READY TO SHIP!

    Applied Motion Products Inc  - 4017-838  - 776619324 - Precision Unipolar Stepper Motor

    A unipolar stepper motor has two windings per phase, one for each direction of magnetic field. Since in this arrangement a magnetic pole can be reversed without switching the direction of current, the commutation circuit can be made very simple (eg. a single transistor) for each winding.

    Status: Discontinued 

    12VDC Stepper Motors 0.16Amp

    100 Steps/Rev 3.6Deg/Step

    4-Phase 75-Ohm,

    Torque: 700 Ounce/Inches

    MPI SPEC# 77619324

    Dimensions: 42mm Square x 33mm Deep

    Mounting: 2-slots 62mm apart on 55x78mm flange

    Shaft: 4.9x11.1mm 

    Unipolar 6-Pin Connector (5 wires)

    Made in Japan - New Old Stock

    Application: Robotics

    Learn More
  7. AIRPAX - 82227/B82359 - Motor, Stepper. 12VDC 2 phase 37 ohm.
    AIRPAX - 82227/B82359 - Motor, Stepper. 12VDC 2 phase 37 ohm.
    Special Price $4.98 Regular Price $8.50 As low as $3.98
    IN STOCK - MORE THAN 1,000 READY TO SHIP!

    AIRPAX - 82227/B82359 - Motor, Stepper. 12VDC 2 Phase 37 ohm.

    Motors, Stepper.

    Simple 2-phase, 12VDC 48 Step/Rev 7.5deg/step, 37 Ohm Bipolar Windings.

    Dimensions: 35mm, 1.38" D. Attached: 4 Wire Bipolar, 16 inches long.

    Mounts 1.7" 42mm hole spacing, includes a 15-tooth 1/4" Diameter Nylon Gear.

    Running Rate to 1800 step/sec.

    Weight: 2.6 oz.

    New Old Stock

    Proudly Made in USA

    Learn More
  8. Airpax - A82454-M3 - Motor, Unipolar Stepper - 5VDC 1.125 Deg/Step 0-400RPM 0-320P/Sec.
    Airpax - A82454-M3 - Motor, Unipolar Stepper - 5VDC 1.125 Deg/Step 0-400RPM 0-320P/Sec.
    Special Price $8.98 Regular Price $16.98 As low as $6.98
    IN STOCK - MORE THAN 100 READY TO SHIP!

    Airpax Sensata - A82454-M3 - Motor, Unipolar Stepper - 5VDC 1.125 Deg/Step 0-400RPM 0-320P/Sec.

    The stepper motor is a device used to convert electrical pulses into discrete mechanical rotational movements.

    Supply: 5VDC.

    Speed: 0-400 RPM.

    Winding Resistance: 15 Ohm.

    Steps: 1.125 Deg/Step. 3.5Watt,

    Wire Count: 6 Leads.

    Mech. Mtg: Two (2) Mounting Holes 2.38"apart.

    Body Dimensions: 2.12" x 2.75" x 1.4" with gear attached to 1/8" shaft.

    Weight: 7 oz.

    Note: 0-320P/Sec, 3.5 watt.

    Rotation: Reversible.

    Made in USA

    New Old Stock 

     

    Learn More
  9. Warner Electric / Superior - KMT091F05E - Stepper, Dual-shaft 3VDC 2.7A 200S/Rev
    Warner Electric / Superior - KMT091F05E - Stepper, Dual-shaft 3VDC 2.7A 200S/Rev
    $250.00
    Motor, Stepper, Dual-shaft. Supply: 3.0VDC 2.7A. Steps: 200 steps per rev. Direction: Reversible. Wire count: Internal-connections 4-terminal. Mech. Mtg.: 90mm frame NEMA 34D. Body Dimensions: 3.36" [85mm] square x 6.2" [158mm] with both shafts, One 0.50"D double flat and one 0.375"D keyed. Connect per 213803. Two-phase, single stack. Weight: 5 lbs. Warner Electric / Superior Learn More
  10. SUPERIOR ELECTRIC CO. - PDT500-1001 - SLO-SYN Positioning System
    SUPERIOR ELECTRIC CO. - PDT500-1001 - SLO-SYN Positioning System
    $495.00

    SUPERIOR ELECTRIC CO. - PDT500-1001 - SLO-SYN Positioning System.

    Stepper motor Drive combined with a Micro-series Indexer.

    New, in box with manual.

    Learn More
  11. Panasonic MATSUSHITA - 55SI-25D AWC - Motor, Stepper. 12V 36 Ohm 7.5 Deg 6 Wire.
    Panasonic MATSUSHITA - 55SI-25D AWC - Motor, Stepper. 12V 36 Ohm 7.5 Deg 6 Wire.
    Special Price $6.98 Regular Price $8.50
    READY TO SHIP - ONLY 90 LEFT IN STOCK!

    Panasonic MATSUSHITA - 55SI-25D AWC Motor, Stepper.

    12V 36 Ohm 7.5 Deg 6 Wire.

    Dimensions: 2.042" (51.8mm) D body, overall with mount 3.138" (79.7mm) long.

    Heatsink is 2.955" (75.0mm) wide x 1.027" (26.00mm) high.

    Shaft 1/4" half flat x 0.750" (19.0mm) long.

    With attached 6 position female header connector.

    Silicon Grease is between the motor the heatsink.

    Weight 11 oz.

    Note: Arduino driven using low cost driver IC ULN2003 transitor array also in our stock.

    For More Detals Rreference: https://arduinodiy.wordpress.com/tag/stepper-motor/

    Manufactured by Matsushita for Coleco Adam.

    Made in Japan

    Learn More
  12. LEDEX - 5945-636-5462 - B-61986-A - Rotary Solenoid Switch, Motor, Stepper. Supply: 48VDC.
    LEDEX - 5945-636-5462 - B-61986-A - Rotary Solenoid Switch, Motor, Stepper. Supply: 48VDC.
    Special Price $89.98 Regular Price $150.00
    READY TO SHIP - ONLY 19 LEFT IN STOCK!

    LEDEX - 5945-636-5462 - B-61986-A - Rotary Solenoid Switch -Motor, Stepper with Switch/Return Spring.

    Rotary Selector Features

    Compact Design
    High Torque to Size
    Snap Action On/Off
    Return Spring

    Type: Base End Shaft, Ratcheting Rotary Solenoid

    Supply: 48VDC.

    Body Dimensions: 1.90"D x 2.74"H.

    Mount: 3 Tapped holes

    Weight: 12oz.

    With Wafer Switch.

    Additional Information: https://www.ermec.com/catalogos/2017/saia/Rotary%20DC%20Solenoids%20mm.pdf

    Military NL-71277-3-2, B-61986-A

    Made in USA

    Learn More
  13. Sensata Industries - AIRPAX - L82101-P2 - Motor, stepper. 12V 118 ohm.
    Sensata Industries - AIRPAX - L82101-P2 - Motor, stepper. 12V 118 ohm.
    Special Price $8.98 Regular Price $12.50 As low as $6.98

    Sensata Industries - AIRPAX - L82101-P2 Motor, Stepper.

    12V 118 Ohm

    15 deg/step.

    6 wires.

    Mounting: 1-3/8" hole spacing.

    Body: 1"D (25.5mm) x 1/2" (12.6mm) deep, with 35mm mount centers.

    Shaft: 1.7mm D x 8.7mm L.

    Weight: 1 oz.

    New Old Stock

    Proudly Made in USA

    Learn More
  14. SUPERIOR ELECTRIC CO. - SS250-1002 - Motor, Slo-Syn stepper 9VDC 1.5A 225-Oz-In.
    SUPERIOR ELECTRIC CO. - SS250-1002 - Motor, Slo-Syn stepper 9VDC 1.5A 225-Oz-In.
    $75.00
    Motor, Slo-Syn stepper. Supply: 9VDC. N/P Current: 1.53A . Steps: 200 steps/revolution. Torque: 225 Oz-In. Direction: reversible. Wire count: 6. Mech. Mtg: 3-hole mounted to 4-hole plate. Shaft: has a removable pulley attached. Weight: 8 lbs. Learn More
  15. SUPERIOR ELECTRIC CO. - M063-CS09E - Motor, stepper. 2.25VDC 4.6A 1.8 Deg.
    SUPERIOR ELECTRIC CO. - M063-CS09E - Motor, stepper. 2.25VDC 4.6A 1.8 Deg.
    $88.00
    Motor, stepper. Synchronous - 2.25VDC 4.6Amp 200 Steps/Rev, 1.8 Degree 150 oz in. Dimensions: 57mm D x 101 mm long. Dual Shaft : 6.6mm x 18mm long. Square flange with 4 holes 47mm centers, 7 pin connector. Class A insulation. May have shelf wear. Learn More
  16. SUPERIOR ELECTRIC CO. - M063-FD09C2 - SLO-SYN Stepping Motor. 2.25VDC 4.6A 100-Oz-In
    SUPERIOR ELECTRIC CO. - M063-FD09C2 - SLO-SYN Stepping Motor. 2.25VDC 4.6A 100-Oz-In
    Special Price $169.98 Regular Price $180.00

    SUPERIOR ELECTRIC CO. - M063-FD09C2 - Motor, Stepper.

    Supply: 2.25VDC 4.6A.

    SLO-SYN Synchronous Stepper.

    Nema Frame 23

    Torque: 100-Oz-In.

    Inertia: 0.11 Lb in2

    Direction: Reversable, 200 Steps per Revolution.

    Wire Count: 6-Wires, Wired to Connector.

    Dual Shaft.

    New Old Stock

    Learn More
  17. SUPERIOR ELECTRIC CO. - KMT091F05E - Motor, Stepper, Dual-shaft 3V 2.7A NEMA34D
    SUPERIOR ELECTRIC CO. - KMT091F05E - Motor, Stepper, Dual-shaft 3V 2.7A NEMA34D
    $195.00
    Motor, Stepper, Dual-shaft. Supply: 3.0VDC 2.7A. Steps: 200 steps per rev. Direction: Reversable. Wire count: Long wire cable to Internal-connections 4-terminal. Mech. Mtg.: 90mm frame NEMA 34D. Body Dimensions: 3.36" [85mm] square x 6.2" [158mm] with both shafts, One 0.50"D double flat and one 0.375"D keyed. Connect per 213803. Weight: 5 lbs. Two-phase, single stack. Learn More
  18. SUPERIOR ELECTRIC CO. - M091-FF-206T - Motor, Stepper, Slo-Syn. Supply: 3.0V
    SUPERIOR ELECTRIC CO. - M091-FF-206T - Motor, Stepper, Slo-Syn. Supply: 3.0V
    $124.95
    Motor, Stepper, Slo-Syn. Supply: 3.0V. Current: 3.0A. Winding Res. 1-ohm 10.4mHy. Torque: 180 Oz-In Holding. Wire count: 4 leads. Frame Size: 90mm. Mech. Mtg. NEMA 34D. SPEC. A213803. Learn More
  19. SUPERIOR ELECTRIC CO. - M091-FF-206ET - Motor, stepper. Slo-Syn. Supply: 3.0V
    SUPERIOR ELECTRIC CO. - M091-FF-206ET - Motor, stepper. Slo-Syn. Supply: 3.0V
    $124.95
    Motor, stepper. Slo-Syn. Supply: 3.0V. Current: 3.0A. Torque: 180 Oz-in holding. Dual shaft SPEC.A213803. NEMA34D. Learn More
  20. SUPERIOR ELECTRIC CO. - M111-FD-302 - SLO-SYN Stepper 6.93VDC 300-Oz-In
    SUPERIOR ELECTRIC CO. - M111-FD-302 - SLO-SYN Stepper 6.93VDC 300-Oz-In
    $289.00
    Motor, Stepper SLO-SYN. Supply: 6.93VDC 1.5A . Steps: 200 steps/revolution . Torque: 300-Oz-In. Mech. Mtg: 3-hole mounting 2.8" spacing. Body Dimensions: 110mm NEMA 42. Shaft: 0.38"D Learn More
  21. SUPERIOR ELECTRIC CO. - 215851-008 - Cords & Plug sets. For Slo-Syn motors.
    SUPERIOR ELECTRIC CO. - 215851-008 - Cords & Plug sets. For Slo-Syn motors.
    $29.95
    Cords & Plug sets. For Slo-Syn motors. I/O Cable for Slo-Syn motors. BCD I/O cable, 25 pin D, 10 foot (3 meters). Learn More
  22. SUPERIOR ELECTRIC CO. - 215851-007 - Cords & Plug sets. For Slo-Syn motors.
    SUPERIOR ELECTRIC CO. - 215851-007 - Cords & Plug sets. For Slo-Syn motors.
    $34.95
    I/O Cable for Slo-Syn motors. BCD I/O cable, 25 pin D, 5 foot (1.5 meters). Learn More
  23. PACIFIC SCIENTIFIC - E33NRHT-LNF-NS-00 - 65VDC 176W 1500-RPM 5.1A, NEMA 34 Hybrid Bipolar Parallel Stepper Motor
    PACIFIC SCIENTIFIC - E33NRHT-LNF-NS-00 - 65VDC 176W 1500-RPM 5.1A, NEMA 34 Hybrid Bipolar Parallel Stepper Motor
    Special Price $169.98 Regular Price $285.00

    PACIFIC SCIENTIFIC - E33NRHT-LNF-NS-00  65V 5.1A NEMA 34 Hybrid Bipolar Parallel Stepper Motor

    Danaher Motion

    Status: Discontinued

    Po:176W 5.1A BIPOLAR PARALLEL

    1.8DEG/STEP

    9.6mm flatted shaft [with threaded hole in end] x 29mmL

    STEPPER MOTOR 86mm dia x 128mmD 80mm mounting flange, 69mm centers

    Note: One has a Pulley attached

    New Old stock 

    9 Lbs.

    Additional Information: https://www.artisantg.com/info/Pacific_Scientific_Step_Motors_Datasheet.pdf

    Proudly Made in USA

    Alternate: 10-16976

     

    Learn More
  24. PACIFIC SCIENTIFIC - E31NCHT-LEN-PD-00 - Motor, stepper. Hybrid. 35VDC 5.4A 1.8 Deg.
    PACIFIC SCIENTIFIC - E31NCHT-LEN-PD-00 - Motor, stepper. Hybrid. 35VDC 5.4A 1.8 Deg.
    $245.99
    Motor, stepper. Hybrid. 35VDC 5.4Amp 1.8 Deg/Step 88 watt 1500RPM. bipolar-Parallel. Sigmax [Flux Focusing increases torque}. Shaft: 9.6mm/0.38" D shaft x 30mm long, 4-lead parallel. Max torque at low speed 500-PPR w/ line driver. Holding Torque: 223-349-oz-in [1.58~1.90nM]. Nema-34, 3.4" square frame. Two MS connectors; 5 Pijn male and an 8 Pin male. Made in the USA. Learn More
View as List Grid

Items 1-24 of 70

Page
per page
Set Descending Direction
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.