Timers & Counters

ISSC/Kanson Electronics - 1013-1-B-4-B1 - Relay, Timer.

Mech Mtg: Panel/Chassis.

Packaging: Enclosed.

Timing Range: 0.6 to 0.25 seconds.

Note: Input: 120VAC.

Output: 10Amp 1/3HP 125, 250VAC.

Pulsed interval.

Relay: 2NO.

NIB with manufactures specification sheet.

Made in USA

ISSC Kanson Electronics - 1012-1-D-1-B Industrial Relay, Solid State Timer.

Input: 115 VAC 50/60 Cycles

Output: 115 VAC, 10 Amp. 1/6HP at 120VAC, 1/3 HP at 240VAC

DPDT output and remote adjust connections.

Adjustable On Delay 0.06 - 1.0 Second

Transient Protection: Isolation Transformer

Range: 03091

12 Pin Plug-n Relay with Socket (Included) 

Mechanical Life: 10,000,000 Operations

Electrical Life: 300,000 Operations

Additional Information: https://www.issc-kanson.com/product_category/delay-timers/

Proudly Made in USA

INDUSTRIAL TIMER - 700-J5890 4SW30S Programmable 5-Cam Timer.

120VAC Type A21 Gear Rack - 5 x 15Amp SPDT Switches - 5 cams.

With attached E15450A2324A1 120VAC 60C 2RPM 5 watt motor.

ACTION INSTRUMENTS INC - V437-2000-1.

Pulse input rate/totalizer.

Flow, rate, speed indication, totalization, peak detect and alarming, including preset tracking for container fill applications.

Pulse or square wave, TTL, open collector or contact closure, 125mVpp to 120V amplitudes.

Visipak - Action's VisiPak indicators are a reliable, cost effective solution for displaying virtually any sensor or process variable. All VisiPak indicators have NEMA 4 or higher front panel ratings and a variety of agency approvals. 

Field Configurable Input

NEMA 4X Front Panel

4 Visual Alarm Points with Front Panel LED Status

Wide Ranging Display

Frequency Input: 0/999999 display.Pulse Input Rate/Totalizer

Isolated 4-20mA output (external power needed) for analog indicators.

Factory New complete with manufactures instruction manual.

Proudly Made in USA

EAGLE SIGNAL / DANAHER - 191-11B601 B82 - 0-8 HOUR TIMER

For over 70 years, Eagle Signal has been the leading supplier of timer solutions for a range of industrial applications all over the world.The Model 191 is a push-button start, motor driven timer with cycle progress pointer, double make-double break snap action switch and is used to energize a load for a preset time period. The pushbutton is located in the center of the time set pointer knob on the panel mounted dial. When depressed momentarily, a mechanical latch and switch is engaged, starting the motor and timing period. After completion of timing, switch 3 and 4 open, 1 and 2 close, motor stops, and timer resets to setpoint. Timer is now ready for another timing operation.

Voltage: 120/240VAC 60Hz, 1/2hP 125VAC, 3/4HP 250VAC 

Current Rating: 10A

Repeat Accuracy: 1.5% of Full Scale

Termination: Motor - Loose Leads, 20 Ga., 6" long stripped 5/8"

Termination Switch: .188 x .250 x .020 Quick Connect Tabs

LR27967

PUSH BUTTON AUTO-RESET TIMERDANAHER 

GW-EAGLE SIGNAL INDUSTRIAL CONTROLS

Approvals: UL, CSA

Made in USA

Manufacturer's Specification In Package.

New Old Stock