LED

Lamps & Lights. Panel indicator RED 3V on a 5" wire plus a 2.4mm male plug. New. Learn More

LED, socket. T1-3/4 (5mm). Housing material: nylon housing. Mounting type: PCB. Connection: solder terminals each adjacent. Outside dimensions: 0.364" OD x 0.478" high, with an ID of 0.267". Note: With 180 Ohm resistor. Each housing has a flat area for plug in 0.356" OD, 0.241" W x 0.243" L, up from rear contacts. More info: http://vcclite.com/wp-content/files/CNX-310-5mm-resistor-drawing1.pdf Note: Cliplite/Cubelite/P-C-Lite/Conxrite. Learn More

LED. 1.8VDC - 2.5VDC, approximately 100mA. Polarized bi-pin. Dimensions: flat package, 4mm wide x 1.3mm deep x 4.5mm high. Lens: amber lens. Emitting color: red. Learn More

LED. Light bar, quad. GaP/GaP 565nm 340mW-max 4Vr @ 30mA If. Pins: 1,3,5.7 Anode. Pins: 2,4,6.8 Cathode. 8 x 20 x 7mmH. Color: green. Package: 8 Sip 0.1" inline.

Learn More

LITE-ON - LTL2251A Led.

Status: Discontinued

Cylindrical, flat top

2.8V 40mA.

Style: Flanged.

Peak Wavelength: 585nm.

Luminous intensity: 700ucd.

Viewing Angle: 180 Deg.

Overall Height: 8.4mm.

Greater surface dimension: 3mm.

Color: Yellow, Diffused.

Package: Radial Leads.

Learn More

LED. Viewing angle: 160 Deg. Millicandela rating: 18mcd. Voltage: 2.2V. Current: 20mA. Peak wavelength: 565nm. Lens color: diffused white. Color: green. Package: Lens: rectangular 1mm x 0.8mm. Dimensions: 1.6 x 0.8mm wide. Package: 0603 SMD. Learn More

LEDTRONICS INC. - PCB-1208-406 LED. 4 LED assembly.

Description.: RJ45 Port Status Indicator LED (Quad Package) 

Viewing angle: 125 Deg. 4x5mm rectangular.

Lens size: 5mm and 9mm apart.

Lens: diffused.

Color: HE green.

Mount: PC pins.

Lead spacing: 0.10".

Assembly is 2.2" long and are made to be interconnected to make a very long green display.

Longer lead is + anode.

More info: http://www.ledtronics.com/Products/ProductsDetails.aspx?WP=360

Learn More

Keystone Electronics - 8668 LED.

Lens cap only for T1-3/4 leds.

Color: red.

Mount: 1/4" hole.

Learn More

Keystone Electronics - 8663 LED. Lens caps only.

For T1-3/4 leds.

Mount: for 1/4" hole.

Color: Green.

More info: http://www.keyelco.com/pdfs/M55p82.pdf

Learn More

LED. 4 Digit. Mount: PCB RA 8 pin. Color: red. Dimensions: 25.6mm long x 9.1mm wide including led x 8.2mm above board. Note: Leds are removable. Package of 2

Learn More

LED. 2.2V 10mA. Package: T1-3/4 (5mm). Color: Red. Learn More

LED. T-3/4 sub-miniature. Non-diffused red. Note: Alt P/N: 200-538. Learn More

BIVAR - 456-500 LED, Hardware.

For Mounting T1, T1-3/4 leds.

Mounting pad, 0.500" (12.7mm) long.

3mm or 5mm LEDs

Material: Nylon.

Color: White.

Rohs compliant.

Learn More

Bivar Inc - LTM-120 Hardware, Spacers.

LED, tiny 6 Pin foot-print. 

Perfectly suited for T1 (3mm) or T1-3/4 (5mm).

Body Diameter:5.1mm; Overall Length:3.1mm

Material: Nylon.

Mount: PCB.

Dimensions: 0.120" (3.1mm) high.

Color: Black.

 

 

Learn More

LED. 2.15V 50mA. Peak wavelength 624nm. Millicanela: 1680mcd. Viewing angle: 120 Degree. Lens: clear, round with flat top 2.4mm. Color: amber. Enhanced thin film. Case: 4-PLCC SMD. New. Feature of the device: more light due to higher optical efficiency color of emission: amber (red). Learn More

LED. Bar - Light emitting diodes. Dimensions: 19.05mm x 3.81mm. Color: High efficiency red. Note: C series/D bin. Learn More

LED. 2.1V 10mA. Luminous intensity: 6.3mcd. Package: T1-3/4 RA. Color: yellow. Lens Style:(L x W x H) 20.57 x 6.10 x 6.10 mm, Lens Width:5mm. RoHS compliant. Learn More

LED. T1-3/4 (5mm). Peak wavelength: 585nm. Voltage; 2.2V Current: 20mA. Millicandela Rating: 160mcd. Mount: vertical PCB. Color: yellow. Lead free. Rohs compliant. Learn More

LED. 2.5V 20mA, 200mcd. Size: T1-3/4 (5mm). Len: water clear. Color: Green (GaP). New, bulk packaged. Super bright/ultra bright. Learn More

LED. 2.1V 20mA. Size: T1-3/4. Panel indicator. Color: Red. Note: High brightness. Rohs compliant. Learn More

LED. 5V 13mA. Peak Wavelength: 655nm. Mount: PCB, RA. Viewing angle: 60 Deg. Bulb size: 5mm. Color: red. Rohs compliant. Learn More

LED. T1-3/4 2.2V 20mA, Circuit board indicator. Color: Yellow. Learn More

LED. T1-3/4 2.2V 20mA, Circuit board indicator. Color: Green. Learn More

LED assembly. T1-3/4 right angle assembly. Peak wavelength: 563nm. Intensity: 10.0mcd. Voltage: 2.2V. Current 60mA. Note: Series 5306. Color: Green. Learn More