Toggle Switch
- Cutler-Hammer / Eaton * - 8906K5367 - Switch, toggle. SPDT 10Amp 115VAC.Special Price $18.98 Regular Price $24.95Cutler-Hammer / Eaton - 8906K4919 Switch, Toggle. SPDT Environmental Sealed, Resistant to Dust, Dirt, Spray Extreme Temperatures Contacts: SPDT. Contact Ratings: 10A 125VAC. Mech: Panel, bushing (11.7mm) long. Panel hole: 30.1mm long x 12.4mm wide x 18.4mm deep plus contacts, behind panel. Overall Dimensions: 31.9mm long x 15.0mm wide x 23.9mm deep, plus contacts Connections: Male 1/4" Quick Connect Terminals. Note: Actuator: 17.2mm long. Environmentally Sealed. Factory new, complete with hardware, indiv packaged. Temperature Range: -85°F to +160°F (-65°C to +71°C) Life: 20,000 operations at rated load 40,000 operations mechanical life Requires 0.47" diameter hole to mount, 15-32 Bushing 32 Thread Actuator: Momentary-both-sides, Must Pull-to-switch One side only. Aircraft-Instrument Military-Purpose Style Learn More
- CUTLER-HAMMER - 7163K2 - Switch, Industrial Toggle. Contacts: 3PDT.Special Price $18.98 Regular Price $24.50
CUTLER-HAMMER - 7163K2 Switch, Industrial Toggle.
Contacts: 3PDT.
Contact Ratings: 15Amp 125VAC/10Amp 250VAC.
Connection: Solder Terminals.
Mech: Panel, One hole.
Body: 1.84" long x 1.382" wide x 1.013" below panel, including terminals.
Note: Threaded bushing length: 0.460".
Actuator length: 0.662".
Additional spec's: 1HP 1-2PH 125-480VAC/1HP 3PH 125-600VAC.
New Old Stock
Learn More - CUTLER-HAMMER - 7690K83 - Switch, toggle. 3PST 15Amp 125VAC.$19.00Switch, toggle. 3PST 15Amp 125VAC/10Amp 250VAC, 3/4HP 250VAC. No bat. Mount: panel. Contacts: 6 screw terminals. Listed: UL. Learn More
- Cutler-Hammer / Eaton * - 7600K3 - Switch, toggle. 3PDT 15Amp Center-Off$19.95Switch, toggle. 3PDT-15A. On-Off-On. Two threaded hole front panel mounting, 0.89" spacing. Screw terminals, missing screws. bulk pkg'd. Width 1.37" (34.8mm), Height 1.79" (45.5mm), Length 1.77" (45mm) NSN 5930-002403671, Made in the USA. Learn More
- Eaton / CUTLER-HAMMER - 8710K14 - Switch, toggle. DPDT 15A 115V.Special Price $18.98 Regular Price $26.50Out of stock
Vibtage Aircraft Eaton Cutler Hammer AN3023-3, 8710K14 Toggle Switch, Contacts: DPDT. Contact Ratings: 15Amp 115VAC. Actuator: On-On. Connection: Screw terminals. Mech: Panel, 2 hole flange, 2.114" (53.7mm) long x 1.261" (32.0mm) wide) with 1.8" (45mm) centers. Body: 36.7mm long x 37.2mm wide x 34mm deep behind panel. Note: Heavy duty, aircraft switch. Operation: maintained. Double marked:AN3023-3 and ST55N.
Learn More - Cutler-Hammer / Eaton - 7611K4 - Switch, toggle. 3PDT 15Amp 125V.$19.00Out of stockSwitch, toggle. Contacts: 3PDT. Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (1HP 1-2PH 125-480VAC, 1HP 3PH 125-600VAC). Connection: male 1/4" QC terminals. Mech: Panel. Panel hole: 1.841" long x 1.376" wide x 0.808" high. Standard 15/32" threaded bushing x 0.470" long (0.659" long-seated). Note: Listed: CSA. Complete with hardware. Learn More
- C & K Components - 7411SHZBE - Switch, toggle. 4P On-On-On.Special Price $18.98 Regular Price $24.50
C & K Components - 7411SHZBE Switch, toggle.
Contacts: 4P.
Contact Ratings: 5Amp 120VAC or 28VDC (0.4VA 20V AC/DC).
Actuator: On-On-On.
Connection: Solder.
Mech: PCB, vertical.
Panel hole: 0.845" long x 0.500" wide.
Note: Miniature. Threaded bushing.
Complete with hardware.
Learn More - CUTLER-HAMMER - SF2GBX191 - Switch, toggle. DPDT 5A 125V. Center-off.$19.00Switch, toggle. Contacts: DPDT. Contact Ratings: 5Amp 125VAC. Actuator: Center-off. Connection: solder. Mech: Panel. Body: 13.0mm long x 12.0mm wide x 13.6mm high plus contacts. Threaded bushing 12.0mm long. Actuator 12.0mm long . Note: Complete with hardware. Learn More
- CUTLER-HAMMER - MS35058-31 - 8809K16 - JBT58 - Switch, Toggle. SPDT On/Off/ON(Mom).Special Price $18.98 Regular Price $24.50Out of stock
CUTLER-HAMMER - MS35058-31 - 8809K16 - JBT58 - Switch, Toggle.
Eaton’s military purpose switches are designed to meet the requirements of MIL-S-83731. Sealed Switches have a silicone rubber lever seal assembled between the lever and the bushing to resist the entrance of contaminants such as dust, sand or water into the contact structure. The switch mechanisms are completely enclosed to resist the entrance of contaminants into the switch. All metal parts are plated to resist corrosion. The heavy duty switches are offered in both standard toggle lever and lever lock versions. Circuit designations are stamped on the side of each switch.
SPDT On/Off/ON(Mom), 3 pos.
Double marked JBT58, Formerly Known as ST42H.
Maximum voltage: 220VAC/250VDC.
Threaded bushing length: 0.505".
Actuator: sealed 0.663" long.
Dimensions: 1.132" long x 0.627" wide x 0.664" high.
NSN 5930-00-655-1523
Contacts: 3 screw terminals.
- Eaton CUTLER-HAMMER - 8690K11 - Switch, toggle. DPDT.Special Price $18.98 Regular Price $24.50
Eaton CUTLER-HAMMER - 8690K11 - Switch, Toggle.
DPDT, 2 position, 15Amp 125VAC/10Amp 250VAC.
One Hole Panel Mount.
Dimensions: 2.5" long x 1.158" wide x 1.055" high. 0.95" behind panel.
Contacts: 6 screw terminals.
New Old Stock
Alternate: TE Connectivity 8690K
Learn More - CUTLER-HAMMER - 8290K116 - Switch, toggle. SPST 3Amp 250VAC.$19.50Switch, toggle. Contacts: SPST. Contact Ratings: 3Amp 250VAC. Connection: wire leads. Mech: Panel, bushing. Panel hole: 1.008" long x 0.516" wide. Note: Standard 3/8" D bushing x 0.473" long. Learn More
- CUTLER-HAMMER - 7511K5 - Switch, toggle. SPDT 15Amp 125VAC.$18.00Switch, toggle. SPDT 3 Position, center off. 15Amp 125VAC/10Amp 250VAC/2Amp 125VAC/1Amp 250VAC. Threaded bushing length: 0.391". Actuator length: 0.553". Mount: panel. Termination: (3) 1/4" male quick connect terminals. Complete with hardware. Learn More
- Cutler-Hammer / Eaton - 8811K17 - Switch, toggle. SPST 10Amp 115VAC.Special Price $18.98 Regular Price $25.00Out of stock
Cutler-Hammer / Eaton - 8811K17 - Switch, toggle.
Contacts: SPST.
Contact Ratings: 10Amp 115VAC.
Actuator: Off- None - On (Mom).
Connection: solder terminals.
Mech: Panel.
Panel hole: 1.133" long x 0.625" wide x 0.624" high.
Standard 15/32" threaded bushing x 0.468" long. Actuator: 0.687" long.
Note: Double marked Military MS35058-30.
More info: Page 146 http://www.eaton.com/ecm/groups/public/@pub/@electrical/documents/content/pg07002001e.pdf
Learn More - Cutler-Hammer / Eaton - 7692K63 - Switch, Toggle. Contacts: 4PDT.Special Price $18.98 Regular Price $24.50
Cutler-Hammer / Eaton - 7692K63 - Switch, Toggle.
Contacts: 4PDT.
Contact Ratings: 15Amp 125VAC / 10Amp 250VAC, 3/4HP 250VAC.
Actuator: On-Off-On, no bat.
Connection: 12 screw terminals.
Panel hole: 1.436" x 1.331" x 0.971" high plus threaded bushing 0.5".
Note: Center off.
New Old Stock - Made in USA
Learn More - Honeywell/Microswitch - 31NT91-51 - Switch, toggle. Contacts: SPDT.$18.88Switch, toggle. Contacts: SPDT. Contact Ratings: 10 Amp, 125, 250, 277VAC. Mech: Panel mount, (3) 1/4 male QC terminals. Note: Weatherproof seal. More info: http://sensing.honeywell.com/index.cfm?ci_id=140301&pn=32NT91-31. Learn More
- Eaton CUTLER-HAMMER - MS35058-26 - 8804K13 - Switch, Toggle. SPDT On/ON(Mom).Special Price $18.98 Regular Price $24.50
Eaton CUTLER-HAMMER - MS35058-26 - 8804K13 - Switch, toggle.
SPDT On/ON(Mom).
Double marked 8804K13.
Maximum voltage: 220VAC/250VDC.
Threaded bushing length: 0.513".
Actuator: sealed 0.675".
Dimensions: 1.14" long x 0.647" wide x 0.618" high.
Contacts. 3 screw terminals.
Learn More - CUTLER-HAMMER - 7690K8 - Switch, toggle. DPDT 15A 125V.$19.00Switch, toggle. Contacts: DPDT. Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (3/4HP 250VAC). Actuator: Momentary. Connection: 8 screw terminals. Mech: Panel. Panel hole: 1.441" long x 1.340" wide x 0.70" high plus contacts. Note: Actual P/N in not on this switch. Threaded bushing: 0.461" long. Actuator: 0.70" long. More info: http://www.eaton.com/ecm/groups/public/@pub/@electrical/documents/content/pg07002001e.pdf Page 161. Complete with hardware. Learn More
- Cutler-Hammer / Eaton - 7695K5 - Switch, toggle. 4PDT 15Amp 125VAC.$19.00Switch, toggle. Contacts: 4PDT. Contact Ratings: 15Amp 125VAC, 10Amp 250VAC (3/4HP 250VAC). Connection: solder. Mech: Panel. Body: 1.440" long x 1.338" wide x 0.967" high. Standard 15/32" threaded bushing x 0.481" long. Note: Listed: CSA. Complete with hardware. Made in the USA. Learn More
- CUTLER-HAMMER - 8826K5/ST50M - Switch, toggle. Contacts: DPST.$19.00Switch, toggle. Contacts: DPST. Actuator: On-(Off). Connection: Screw terminals. Mech: Panel, one hole. Body: 1.354" long x 0.750" wide x 1.080" behind panel including terminals. Note: Raised threaded bushing length: 0.463". Actuator length: 0.664". Learn More
- CUTLER-HAMMER - 8566K3E27 - Toggle switch. Center-off one side momSpecial Price $19.95 Regular Price $24.95Factory new Toggle switch Center-off one side momentary, single pole Enviromentally sealed lever lock switch. Learn More
- C & K Components - 7415SH3ZQE - Switch, toggle. 4PDT 5A 125VAC.$19.00Switch, toggle. Contacts: 4PDT. Contact Ratings: 5Amp 125VAC/ 2Amp 250VAC. Actuator: Mom-On-Mom. Connection: solder terminals. Body: 0.842" long x 0.502" wide x 0.592" high including terminals. Note: Miniature. With 0.315" keyway threaded. Made in the USA. Learn More
- Cutler-Hammer / Eaton - 8822K21 - Switch, toggle. DPST 15A 125V.$19.91Switch, toggle. Contacts: DPST. Contact Ratings: 15Amp 125VAC. Actuator: On-Off (Ctr). Connection: screw terminals. Mech: panel mount, bushing. Body: 1.338" long x 0.750" wide x 0.757" high plus terminals. Bushing: 3/8" D x 0.480" long. Shaft: 0.650" long. Note: Military double marked MS35059-24, NSN 5930-006362821. Learn More
- Cutler-hammer - 8836K9 - Switch, toggle. SPST 25Amp 115VAC.$20.00Out of stockSwitch, toggle. Contacts: SPST. Contact Ratings: 25Amp 115VAC, 25Amp DC 28V DC. Actuator: On-None-Off. Connection: screw. Mech: panel. Panel hole: 1.321" long x 0.716" wide x 0.866 deep. Threaded bushing: 0.509" long. Note: Double marked Military MS25306-222. Enviormentally sealed switch. Learn More
- C & K Components - 7405SYCQE - Switch, toggle. 4PDT 5A 120V.
C & K Components - 7405SYCQE Switch, Toggle.
Series 7000 Miniature Toggle Switch
Contacts: 4PDT.
Contact Ratings: 5Amp 120VAC, 2Amp 250VAC.
Actuator: (On)-Off-(On).
Connection: pc leads.
Mech: PCB.
Panel hole: 12.7mm long x 21.5mm deep x 12.2mm high.
Threaded bushing 9.0mm long.
Actuator 10.2mm long .
Note: Miniature.
Sealed contacts.
Complete with hardware.
Made in the USA.
Learn More