Microphones

BE-010 Microphone Windscreens

On stage or in a recording studio, a microphone is the most important device you need to capture vocals and instruments. Whether you're cutting your hit single or rocking out in front of a large crowd, your microphone projects everything you do, so having good quality mic accessories just makes sense. Windscreens and grilles are small, lightweight and portable components that can really impact the sound of your performance. Windscreen and grilles are covers that improve the sound quality of a microphone. Normally a windscreen is made from foam and a grille from metal. They act as a filter to prevent popping, breath sound, moisture and wind noise from reaching your mic.

Dimensions: 1-5/8" tall with a 7/16" Diameter Opening and an Inside Depth 1-1/3"

High Quality Multi Foam is ideal for reducing wind, sibilance and pop noise. 

Slides on Easily.

(Available in Black or Brown)

PRIMO - EM-47A Audio, Microphone.

From live concert sound to recording a movie, pro-audio microphones are critical to the clarity of the sound. Primo's products are use inside many major brands from vocal mics to shotgun camera mics, our quality is perfect for professional and amateurs alike.

Electric Condenser Microphone Cartridge.

Omni-directional.

Highest quality, very high output into 200Meg Ohm to 500Meg Ohm, using FET AMP with source follower.

Has no internal preamps.

Can withstand very high S.P.L. (sound pressure level over 90db?).

Dimensions: 0.828" (21mm) D x 10.5mm high.

Threaded.

PANASONIC WM-034CY - WM-034 - Audio, Microphone Cartridge.

Omnidirectional Electret Condenser Cartridge.

Part Status : Discontinued

Electret Condenser, Omnidirectional 42db +/-3db.

Frequency Range: 20Hz to 16kHz.

Impedance: 2.2K Ohm. (2200 Ohms)

Sensitivity: -62+/- 3dB

Signal Noise Ratial: 60 dB

Voltage: 4.5VDC, Voltage Range: 4.5 to 10V  (Vs)

Current: 800uA.

Output Type: Analog.

Dimensions: Circular 9.7mm Diameter x 6.7mm thick. (0.382" X 0.264")

Through hole Radial PCB mount, 2.54mm (0.100") standard pin spacing.

Termination: Solder Pads.

Applications: Useful for almost any type telephone and other applications.

Alternates: P9992-ND, CTI 42059, YPM-CH022, V79CH

Made in Japan

ASTATIC - T2M-914 Replacement Omnidirectional Audio, Microphone /Speaker.

Speaker / Microphone Matches Virtually any Transmitter.

Micro Switch with Positive Snap Action.

Rotable Spring Clip on Back.

Power Requirements: 3 to 12 VDC.  

Quality Electret Cartridge. 

Lightweight Durable Noryl Housing.

Dimensions: Approximately 2" wide x 3" high x 1.3" D.

Complete with 6 wire Neoprene coil cord, extends to 5-1/2 feet. 

Includes Hook-up Instructions. 

Electret microphones are a type of electrostatic capacitor-based microphone which eliminates the need for a polarizing power supply by using a permanently charged material.

Proudly Made in USA

FV272/1740 - Audio, Microphone Element, Dynamic.

Element Miniature.

Dimensions: Approximately .764"X .50" X .36" (19.5 X 12.7 X 9.0 mm)

Strong on Higher Frequencies.

Researching this element to confirm if it is the Heil HC-5 that is in high in demand by Ham Radio Enthusiasts

Note: Purchased from Astatic following their plant closure.

Made in Taiwan

DM60 Audio. Microphone Cartridge.

400 Ohm Coil.

Material: Nylon Case.

Dimensions: 0.985" OD x 0.8" Length.

Color: Beige.

Purchased from Astatic Factory following Shutdown. Over 200 Sold.

Vintage New Old Stock

CTI Audio 05114 Audio, Microphone Elements.

Approximate dimensions: 0.553" OD x 0.838" high.

No other information available.

Computer Related. USB-A to USB-B Cable.

• Burst data transfer rates up to 480 Mbps (system dependent)
• Compliance with the USB 2.0 serial bus interface standard
• Backward compatibility with all USB 1.1 interfaces

Standard USB Male to Male Cable.

Length: 6 Foot.

Color: Beige.

Temperature: 60 C

High Speed Transfer:  Up to 480 Mbps transfers data speed for USB 2.0 devices

Backwards compliant with USB 1.1 (12 Mbps) and low-speed USB 1.0 (1.5 Mbps).

Cable Specifications: 2835 E87647-DG AWM 60 Deg C 30V VW1.

UL Approved

New Old Stock

Applications: This cable is designed to interconnect devices with USB interfaces. Ideal for connecting an audio interface, Printer, Scanner, Server, Fax, camera, piano, USB microphone or instrument, and many other peripherals to a PC. 

Switchcraft - M3M XLR Audio Connector.

Male with shell having 13/16-27 external threads to engage equipment with internally threaded body. Terminals extend out rear (threaded end) to permit wiring without disassembly. Adapter receptacles mount directly to microphones or similar equipment to provide highly reliable 3-, 4- and 5-pin Switchcraft Q-G® connections. Adapter shell and coupling nut are brass, satin nickel finish.

Standard: Standard XLR

Housing Material: Brass with Satin Nickel Plated Finish

Gender: Male

Number of Contacts: 3, Number of Ports: 1, Number of Positions: 3

Dimensions: Length 27.79 mm

Male 3 Pin Microphone Adapter Receptacle.

Polarizing Groove & .25 Keyway

Overall Dimensions: .813" Long X .734" Diameter (20.65 X 18.64 mm)

13/16 - 27 UNS-2A Thread

Applications: Automotive, Communications Equipment, Enterprise Systems

Mouser P/N 502-M3M

RCA Tac Tec Astatic - M1569029 Microphone.

Replacement Microphone for RCA Tac Tec 2-Way Radio Receivers. (Spec1476A).

Retractable Coiled Cord

7 Position Female Connector.

Spec. 1476A

Rare - New Old Stock - Vintage collectable

Made in Japan

Belkin - 75-210B - Coiled 6.35mm (1/4") Male/Female Stereo Audio Headphone Extension Cord.

Cable: Quality TRS Male Stereo to Female Jack Extension, Shielded Stretch Cord.

Connectors: 6;35mm Male to 6.35mm Female

Molded Strain Reliefs

Conductor Material: Copper

Length: 5 foot Coiled extends to approximately 14 Feet

Applications: Headphone or ear bud extension and remore location for easier connectivity to other equipment.

Microphone Replacement Grille Ball Head Mesh Cover, Windscreen.

If you’ve ever spoken into a microphone before, you probably know to speak into the metal grille for the best results. Chanced are you’ve spoken into a handheld microphone with a spherical grille. Microphone grilles come in many shapes and sizes and have many purposes for microphone performance!

The windscreen attenuates wind noise and environment noise and provides ample protection.

Material: Metal, Heavy Screen.

Fits Many Brand Mic Accs

Audio, Microphone.

Head/Cover only with windscreen.

Dimensions: overall 1.734" D x 2.860" high.

Black lower 1/2 is actually 0.920" Long, Windscreen is actually 1.927" long.

Threaded ID 1.244" (31.6mm) Diameter at base.

Audio, microphone cartridge.

Open frame.

Dimensions: Approximately 1.147" x 2.406" high.

UnBranded - 8-603 - Audio, Microphone/Speaker for Two Way Radio Walkier Talkie.

Hand Held with Locking Slide Switch Press On-up to Talk

Connectivity: Two Male 2-Conductor Plugs about 5/8" apart, one 2.5mm and one 3.5mm.

Approximate Dimensions: 5.25" high x 1.5" wide.

Color: Light Green

Type of Jack: K 

Vintage - New Old Stock

Made in Japan

Applications: Compatible with various K-Head walkie-talkies

Western Electric - 31N82 Telephone Handset Element.

For Telephones.

Dimensions: 1.642" D x 0.180" high.

Overall 0.670" deep.

Rare Vintage New Old Stock

Microphone Element for Telephones.

Dimensions: 1.257" D x 0.180" High.

Overall 0.412" Deep.

Note: Each with a clear plastic protective cover, overall 1.539" D x 0.37" deep, with threaded ID.

CTI - 41821 - Miniature Microphone Elements

Felt Top

Dimensions: 10.6mm tall x 10.0mm Diameter.

3-Radial Leads on Bottom of Element.

Aluminum Shell

CTI AUDIO INC - 41543-03-00 - Microphone MIC Grille Mesh Cover Replacement

Audio, microphones.

Windscreen.

Material: metal.

Dimensions: 1.75" square.

ASTATIC - MC631 Microphone Elements

New 28.2mm MT Diameter

2 Solder connections

Overall 36.1mm Round.

Manuf: Astatic

UPC 642008200404

ASTATIC - MC612 - Audio, Microphone Element.

Plastic mount for inside of mouthpiece.

Dynamic Cartridge for Buckeye 400 Microphone

Mouth piece not included.

CTI Audio / Astatic - 46101-0000 Microphone Element.

Approx Size: 1.148" OD x 2.431" H.

Made for CTI Audio Inc (Now Astatic).

Specifications not available.

Astatic/CTI Audio - 42327-0000 Microphone Element, Insert.

Felt Face 0.7" (17.7mm) Dia x 31.2mm face

TO contacts.

Manuf for CTI Audio Inc.

No other info avail.

Unidentified MFG - 4221700372 - Audio. Microphone Grille/Windscreen.

If you’ve ever spoken into a microphone before, you probably know to speak into the metal grille for the best results. Chanced are you’ve spoken into a handheld microphone with a spherical grille. Microphone grilles come in many shapes and sizes and have many purposes for microphone performance!

The windscreen attenuates wind noise and environment noise and provides ample protection.

Material: Metal, Heavy Screen.

Overall Dimensions: 1.714" (43.5mm) Wide x 1.648" (41.8mm) High.

Threaded ID 1.289" (32.7mm x 5/16").

Overall 1-1/2" Deep ID.

Commercial Ultrasonic / Audio Transmitter & Receiver Probe

Transducer Receiver consist of a piezoelectric ceramic disc mounted with-in a probe.  A conical metal resonator bonded at the center of disc acting as a rigid piston. This special construction provides high sensitivity, wider bandwidth and excellent durability in wide temperature and humidity ranges and high stability in electrical and mechanical characteristics. Due to its free vibration character the open type transducers are very suitable for continual wave driving, such as Doppler motion detector.

High Quality Distance Ultrasonic Sensor Head

Marked in Red: "2-5-10cm. 3-8 Vol. 1-2 Inch & 2 - 12 Feet.

Has two DIN Male connectors, a 5-pin and a 3-pin plug attached to the special microphone with a 5 foot long flat cable with widely separated conductors.

Specific Application and Specifications Unknown - Great for Hobbyist/Experimenters/Inventors 

Typical Ultrasonic Probe Applications: Measurement, Motion, Sensing & Instrumentation, Automation & Process Control, Robotics, Security, Power Management, Leak Detection. and Inspection In Industrial, Aerospace, Medical, and Manufacturing.

Vintage - New Old Stock