Terminal Blocks

Kulka Marathon - 2599 Connector, Terminal Block, Feedthrough.

Single row Terminal Block

Circuit Count: 12 pole / Position.

Mounting Type: PCB.

Current Rating: 15 A

Voltage Ratings: 300 V AC/DC Class B, 150 V AC/DC Class C

Base Material: Phenolic (150 C)

Screws: Brass, Nickel Plated #6-32 Slotted

Poles Spaced at 3/8"

Wire Range: 16 - 22 AWG

Outside Dimensions: 5-5/16" long x 9/16" wide.

Genuine Kulka - New Old Stock

Approvals: UL, CSA, CE, RoHS Compliant

Alternate: 2599A GP Series

Learn More

Kulka Marathon Electric Manuf Co - 116-602-Z-2 - Connector, Terminal Block.

Circuit Count: 2 Pole, 2 Position.

Mounting Type: PCB leads 0.6" long x 0.205" wide.

Outside Dimensions: 2" x 1.3" wide x 0.66" high.

Note: 4 Screw Double Row (2 x 2).

Priced Each

Learn More

Kulka / Marathon - 10TB28 - Terminal Block / Barrier Strip, 28 Position, 30Amp. Marathon Special Products Stud Series Military Terminal Blocks use studs or threaded posts for making connections. Instead of securing wires with screws, wires are usually connected by attaching them to threaded studs or posts, which are then secured with nuts. Nuts and connectors are provided when appropriate. They are unplated brass and shipped unassembled. The molded material used in this product is MAI-60 in accordance with military specification MIL-M-14. These terminal blocks are compliant with military specification A-A-59125. Connector, Terminal Block For use with Listed Ring Fork or Spade Terminals. Type: Double Row, Front Connection Circuit Count: 28 (14 x 2). Voltage Rating: 300 Volts RMS, 1600 Volts RMS Dielectric Withstanding Voltage Current Rating: 30 Amp, 14 AWG Stud Thread: 6-32 (Includes 28 Optional Type BN2 Threaded 0.25” x 0.375” Barrel Nuts) Dimensions: 6.5" Length x 1.325" Width x 0.70" Height Pitch Spacing: 9.7mm Panel Mounting Dimensions: 6" Mounting Centers. Connection: Isolated Brass/Copper. Note: Navy Class Military NSN 5940-00-502-8480. Agency Compliance: A-A-59125/14 Supercedes MIL-T-55164/16 MAI-60 in accordance with MIL-M-14 Insulator base: - MAI-60 in accordance with MIL-M-14 Stud #5-40 NC: Brass, Unplated Barrel Nut: Brass, Unplated (Part no. 9201933) Lug Information - MS17143 – 11 - Maximum Lug Width: 0.282” (7.2 mm) Lug Recommended Torque: 8 – 10 in. lbs. (0.9 – 1.1 N∙m) - Screw Size: #5 We also Separately Sell Jumper Marathon Kulka RJ Type Jumper Busbar 600RJ-14. New Old Stock Made in USA Retails Over $200.00 Learn More

Mersen GOULD/SHAWMUT - 69082 - Connector, Power Distribution Block, Terminal Block 380A.

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code®.

This efficient aluminum block splices cables or splits primary power into a wide range of secondary circuits and provides a fixed tap-off point. It accepts aluminum or copper wire, and saves splicing and taping time for contractor rework.

PDB 2P. (1) 500MCM-#4 X (12) #4-#14. 600V CU9AL.

No. of Poles: 2

Amps (AC): 380 Amps

No. of Inputs per Pole: 1

No. of Outputs per Pole: 12

Line/Load Connection: Box Lug/Box Lug

Mounting Type: Panel Mount

Input Wire Range: 500 kcmil~4 AWG

Output Wire Range: 4~14 AWG

Includes Cover: No

Voltage (AC):600 Volts AC

Composition: Glass-Fill Polycarbonate

Color: Black

Approvals: UR; CSA

Dimensions: H x W x D:5.35 in x 5.31 in x 3.91 in

UPC 782001655655

Mersen, formerly Ferraz Shawmut

Applications: Splicing cables, Splitting primary power into secondary circuits, Fixed junction tap-off points

Learn More

Mersen GOULD/SHAWMUT - 69002 - Connector, Power Distribution Block, 545Amps, PDB 2Pole.

PDB 2P 1000-250MCM

MPDB69 Series 

600V CU9AL.

Note: Splicer Block

2-Pole, 545Amp

Bx/Bx Line:(1)1000MCM-250MCM Box Lug

CuAl Load:(1)1000MCM-250MCM Box Lug

CuAl. UL, CSA

Mersen, formerly Ferraz Shawmut

Applications: Splicing cables, Splitting primary power into secondary circuits, Fixed junction tap-off points.

Learn More

Connector, terminal block. Circuit count: 15 position. Mounting type: thru board. Outside dimensions: Overall 7-1/3" long x 1-1/8" wide. Learn More

Terminal/barrier blocks. 23 Position terminal strip. Mount: PCB. Dimensions:10-13/16" long x 1.138" wide. Learn More

15 PT T-STRIP THRU BOARD 6-5/16" LONG x 7/8" WIDE Learn More

Terminal strip. 11 Position. Each side has 24 male 3/16" quick connect terminals. Mount: Flush, 4 hole with 4-1/2" centers. Dimensions: overall 1-1/3" wide x 4-3/4" long x 11/16" high. Learn More

ETC/LTE - TS10-01 - Connector, Terminal Strip.

10 Position.

Mount: PCB Flush.

Dimensions: 9/16" Wide x 4-1/3" Long with 4-1/8" centers.

Four Quick Connect Tabs / Lugs per Port.

One side has (10) 3/16" male qc terminals, opposite side has (30) 3/16" male QC terminals.

Overall appearance 1" wide.

Learn More

Connector, terminal strip. 7 Position, single row. Mount: PCB through hole. Dimensions: 0.881" wide x 2.590" long x 0.409" high. Learn More

ETC/LTE - TS04-03 Connector, terminal block.

Circuit count: 4 dual row, one side feed through.

Pin spacing: #6 screws.

Outside dimensions: 2.5" long x 1.0" wide.

Learn More

ETC/LTE - TS01-01 - Connector, Terminal Block / Terminal Strip.

1 Pole

Circuit Count: 1 Position.

Temperature: -40 to 266 F

Mount: Flush Panel Mount.

Housing Material: Thermoplastic, Gray.

Mounting Type: PCB, Flush.

Connection: #8 screw.

Outside Dimensions: 1.537" (39.0mm) long x 0.806" (20.4mm) wide. 1-1/8" mount centers.

Genuine ETC/LTE - New Old Stock

Alternate: 599-GP-01

 

Learn More

Connector, terminal block. Circuit count: 15 position. Mounting type: PCB 16 pin. Note: Single row. Mount ctrs: 6-1/16". Overall dimensions: 6-5/16" long x 0.888" (22.5mm) x 0.414" (10.5mm) high. Learn More

Connector, terminal block. Housing gender: receptacle. Contact gender: female 5 Position. Single row. Mounting type: PCB Flush. Pin spacing: 5.3mm. Connection: Top screw, RA crimp. Outside dimensions: 0.992" long x 0.458" deep x 0.440" high. Note: Learn More

Connector, terminal/barrier block. Four (4) screw, 25Amp 300V. Material: thermoplastic. Mount: PCB 4 pin RA with 2 mount holes for screws 1-1/8" centers. Screw size: 6/32 x 1/4". Color: black. Listed: UL/CSA. Learn More

Connector, terminal block. Circuit count: 12 (6 x2). Mounting type: Panel, 2 holes at 1.68" centers. Connection: screw. Outside dimensions: 2.677" long x 2.320" wide x 0.886" high. Learn More

Terminal block. Pull apart, sectional, end. Learn More

Cutler-Hammer  Eaton - E51RC - Limit Switch Component

Terminal Block Housing

Connection: Screw Terminals

Connector Type: 4-wire

Number of Conductors: 5

Number of Wires: 4-wire

Series: E51 Series

Standards: NEMA 3,3S,4,4X,6,6P,12,13 and IEC IP67

Temperature Rating: -25 to 70 C

Thread Type: 1⁄2 NPT

Type: Assembled Inductive Proximity Fiber Optic Sensor

UPC 782113107202

Voltage Rating: 120 VAC

Dimensions: Width: Height: 1.06 Inch, Length: 2.92 Inch, 1.54 Inch

UL Listed; CSA Certified

Learn More

Cutler-Hammer / Eaton - E50RB - Limit Switch Component

The E50RB is a Limit Switch Receptacle with operating lever and 15° travel to operate contacts. It is designed for use with the E50 series heavy duty limit switch.

Terminal Block Housing, 8 terminals

ontact Force: 1.8-inch-lbs 

Operating Temperature: -10 to 94°C  

Learn More

Connector, terminal block. Circuit count: 20 position. Connection: turret pins. Outside dimensions: Overall: 9-9/16" long x 0.74" wide. Note: Curtis Milwaukee. Learn More

Connector, terminal block. Circuit count: 5 Position. Mounting type: PCB feed-thru. Connection: #6 screw. Outside dimensions: 2.25" long x 0.73" wide x 0.544" high. Learn More

Connector, terminal block. Circuit count: 16 Position (2 Rows). Mounting type: Panel, flush. Connection: #10 screw. Outside dimensions: 9-3/16" long x 2.007" wide x 1.278" high. Overall with 3 hole mount each end 10-1/3" long. Note: Heavy duty. Learn More

CINCH JONES - 5-164-Y Connector, Terminal Block.

Status: Discontinued

Circuit Count: 5 Position (5 x 2).

Contact Ampacity: 15 Amp.

Max. Wire Size: #14

Insulation Voltage: 250V.

Mounting Type: PCB.

Operating Temperature: -55 to 300 F

Connection: 6-32 x 5/16" BH Screw.

Outside Dimensions: 2.532 long x 0.877 wide x 0.41" high, 2.250" mounting Centers.

Note: Open Bottom with one row of solder terminals below double row.

Alternate: MS-5-140Y

Learn More