Terminal Blocks

Connector, terminal block. Contact gender: 10 x 1. Insulation material: phenolic. Pin spacing: 0.370" (9.4mm). Connection: pcb pins and screw terminals. Outside dimensions: 3.815" long x 0.632" wide x 0.652" high. Note: NC6 Series (NC6-P107-10). Learn More

Connector, terminal block. Circuit count: 12 Position (6 x 1, each level). Contact ampacity: 25Amp. Insulation voltage: 300V. Pin spacing: 9.53mm. Connection: 4/40 screws. Note: Series MB6. 12-22AWG Wire. Tri-barrier. Double level snapped to length. MB6-P108-12. Learn More

Connector, terminal strip. 48 Position. Mount: Din rail. Dimensions: 16-5/8" long x 1.234" deep x 1.151" high. Note: Bul 1492, Style F. Learn More

Connector, terminal block. Circuit count: 42 Position (Single row). Mounting type: Din rail, vertical mount with RA Pins, inline. Connection: screw. Outside dimensions: Overall 8-1/3" long x 1.486" wide (including RA leads) x 1.125" high. Note: 24 position on a Din rail mount. Snap together section. Learn More

WIELAND - Z5.522.7453.0 - Connector, Terminal Block.

Circuit Count: 1 Position.

Mounting Type: Din Rail.

Newark: 01M9526

Equivalent: Multicomp SPC11783

Learn More

WIELAND - 25.125.1053.0 Connector, Terminal Block.

Circuit Count: 10 Position (Single).

Contact Ampacity: 10Amp.

Insulation Voltage: 300V.

Mounting Type: PCB, Pins.

Connection: Top screw, Right Angle Wire Entry/Exit.

Outside Dimensions: 1.995" long x 0.322" wide x 0.454" high.

Note: Gray.

Learn More

WIELAND - 25.320.0853.1 - 8-Position Terminal Strip / Block

The 25.320.0853.1 is a 8-pole right-angled marked Plug-in Terminal Strip provides quick-connect and disconnect of PC board wiring. All metal parts are recessed or enclosed in the insulating body to provide circuit protections and dead-front safety. Insulating housings are made of polyamide 6.6. Captive nickel-plated brass screws are secured against loosening. Contact springs and solder pins are tin-plated bronze.

TYPE: Screw Terminal Block

Wire Size(Max): 12AWG BLACK

Mounting Type: PC Board, Right Angle

Pitch Space:0.197"

Alternate: Newark 59K9265

Learn More

Connector, terminal block. Circuit count: 6. Contact ampacity: 24Amp. Insulation voltage: 250V. Mounting type: Din rail. Connection: Screw down. Note: Wire size: 26-12AWG. Non fuse din rail terminals (add on). Beige. Alt P/N 1784180000. Learn More

Interface module. RI 26A IDC GSED w/latch kit Learn More

Weidmuller - 57.503.0053.0 - Connector, Terminal Block, Screw Clamp Terminal.

Term Block Rail Mt 1P 44MM Wide

Housing Gender: Plug.

Contact Gender: Male.

Circuit Count: 1 Position.

Insulation Voltage: 600V.

Mounting type: PCB, din rail.

Connection: Screw Terminals.

Wire Size: 24-12AWG.

Made in Germany

Learn More

Terminal/barrier strip. Single row 13 Position, closed back, 3/8" centers. Overall dimensions: 5-9/16" long x 11/16" wide x 5/8" high. Plus PCB pins. Mount centers: 5-1/4". Learn More

Miller - PT-145 -200 Ampere Copper Feed Through Contact RED HIGH CURRENT SINGLE CONTACT High Current Single Contact Mounted on Heavy Phenolic Base Plate Base Plate Dimensions: 2.25" X 4.0" X 0.375" Thick  Copper Contact L Bracket Dimensions: 1.245" X 2.1" X 0.1285"  Copper Contact Contact Stud Head is 1.0" Diameter X 1.69" Length w/ 1/2"-13 Thread Phenolic Base Plate Has two Mounting Holkes Approximately 0.28" Diameter 2.97" Spacing New Old Stock Learn More

Unidentified MFG - 680G5 - 8-154 - Vintage Feed Through Binding Post Terminal Strip, Heavy Duty Phenolic 3 Position.

Circuit Count: 3 Position w/Three 8-32 Screws.

Contact Lug / Screw Material:  Nickel Plated Brass.

Board Material: Phenolic/Bakelite

Mounting Type: Panel, With Two 90 Degree Steel Mount Tabs 2.0" centers.

Connection: Screw on External Connection Side, Solder Lugs on Internal Side.

Outside Dimensions: Length 2.500" x Height 0.875 " x 0.1275 Thickness.

Color: Brown

Applications: Speaker Sets, Shortwave Radio, Antenna Connections, Audio/Visual, TV, Two Radio, Drake 2a, or Restoration of Audion Equipment..

Vintage New Old Stock

Proudly Made in USA

Note: Much more robust than current Keystone Terminal Strips

 

Learn More

Connector, terminal block. Circuit count: one position (2 joined). Insulation voltage: 800V. Housing material: plastic. Mounting type: Din rail. Outside dimensions: 41.2mm long x each is 8.0mm wide (16.0mm overall width) x 32.8mm above din rail. Note: Used/Removed from equipment. Learn More

Connector, terminals block. Through type single terminal block. Learn More

Terminal block. 1NC 10Amp 240VAC. For use with 3TH2/3TF2 devices. Listed UL/CSA. Used/removed from equipment. Learn More

7-Position front entry header mount PCB MT terminal strip 0.200" spacing Learn More

Connector, terminal block. Housing gender: receptacle. Contact gender: female 6 Position. Single row. Mounting type: PCB pins. Connection: Top screw, RA crimp. Learn More

RDI - NC6-P108-02 - Dual Terminal Block

Number of Positions:2

Pitch Spacing:9.53mm

Wire Size (AWG):22-12

Current Rating: 20AMP

Voltage Rating: 300V

Wire Gauge: 12-22 

Mounting Type: PC Board Terminal Block Clamp

Type: Barrier

Terminal Block RoHS Compliant: Yes

UL/CSA

Learn More

Connector, terminal block. Circuit count: 5 position. Contact ampacity: 15Amp. Insulation voltage: 600VAC. Mounting type: PCB, thru hole. Pin spacing: approximately 0.395" (10.0mm). Connection: # 6 screw, PC pins. Outside dimensions: 2.694" long x 0.705" wide x 0.607" high. Note: Wire Size: 12-18AWG. Series 6. Operating temperature: 105 Deg C. Made in the USA. Learn More

Connector, terminal block. Circuit count: 8 Position. Mounting type: PCB. Pin spacing: 5.08mm. Connection: screw. Outside dimensions: 1.575" long x 0.50" wide x 1.019" deep. Note: Pluggable. Learn More

Connector, terminal block. Circuit count: 20 Position. Contact ampacity: 10Amp. Insulation voltage: 250V. Connection: Top crimp, RA screw. Outside dimensions: 100mm long x 15.0mm wide x 18.2mm high. Note: Green. Eurostyle. Learn More

Connector, terminal block. Circuit count: 3 Position. Contact ampacity: 24Amp. Insulation voltage: 250V. Mounting type: PCB RA leads. Pin spacing: 5.0mm. Connection: Top crimp, RA screw (90 Deg). Outside dimensions: 15.6mm long x 18.0mm wide( plus RA leads) x 11.1mm high. Note: Green. Learn More

Connector, terminal block. Circuit count: 2 Position. Contact ampacity: 10Amp. Insulation voltage: 250V. Connection: Top crimp, RA screw. Outside dimensions: 10mm long x 15.1mm wide x 18.1mm high. Note: Green. Learn More