F.A.S.E - FASE - TE1000/0.33UF/400 - 0.33UF 1000VAC Stainless Steel Radial Crossover Capacitor.

F.A.S.E - FASE - TE1000/0.33UF/400 - 0.33UF 1000VAC Stainless Steel Radial Crossover Capacitor. Non-polar capacitors can be connected to a power supply in any direction; their overall capacitance has no impact on the reversal of polarity, so they can be used interchangeably in both AC and DC systems. This capacitor has a lower AC voltage rating compared to its DC voltage rating because the way AC voltage fluctuates causes additional stress on the capacitor's dielectric material. Type: Non-Polarized MTP Film Capacitor Configuration: Tubular Radial Voltage Rating: TE 1000 VAC, TS 400VAC Capacitance: 0.33 uF Tolerance: +50/-10% Dimensions: 0.675" (17.2mm) x 1.3" (33.3mm) Length Shape: Round TubularLead Spacing: Radial Leads 6.6mm Enclosure: Hermetically Sealed Stainless Steel Applications: Crossover networks and/or used to eliminate DC signals, reduce noise, and filter. Excellent replacment for paper/wax capacitors in tube radios. Also Telecommunications instruments, industrial electroncis and electronics equipment. New Old Stock In the context of capacitors, "TS voltage" refers to the "temperature-sensitive voltage," which is the maximum voltage a capacitor can safely handle at a specific elevated temperature, usually considered the "derating temperature" where the rated voltage needs to be reduced due to increased heat. "TE voltage" on a capacitor typically refers to the "rated voltage" which is the maximum voltage that can be safely applied across the capacitor without damaging it; it's usually printed directly on the capacitor body and represents the safe operating limit.