HAMLIN - MDRR-4-1722 - Glass Reed Switch, SPST, NO
- Buy 10 for $2.98 each and save 25%
- Buy 50 for $2.49 each and save 37%
HAMLIN - MDRR-4-1722 - Reed Switch Glass Capsule, Two Ferromagnetic Nickel-Iron Wires.
The two wires are formed into "reeds" by flattening one end. The reed ends are carefully aligned with a small overlap and then permanently sealed inside the glass capsule. The overlap or contact area of the reeds is coated with special metals such as ruthenium. The nickel-iron leads are tin plated so that they can be soldered.
Benefits:
- Hermetically sealed switch contacts are not affected by and have no effect on their external environment
- Can be used as changeover or normally closed contact
- Zero operating power required for contact closure
- Excellent for switching micro-controller logic level loads
A miniature changeover switch with a 14.73mm long x 2.54mm diameter (0.580" x 0.100") glass envelope.
The Reed Body Measures 0.580" Long. 0.100" Diameter Length with leads is Approximately 1.60" Long
Note: Hamlin Products are now Littelfuse products.
Note: Price is for 1 Glass Reed Switch
Applications:
- Position sensing
- Industrial controls
- Office equipment
- Home appliances
| SKU | 148175 |
|---|---|
| Condition | FN - FACTORY NEW |
| Part Number | MDRR-4-1722 |
| Alternative Part Number | MDRR-DT |
HAMLIN - MDRR-4-1722 - Reed Switch Glass Capsule, Two Ferromagnetic Nickel-Iron Wires.
The two wires are formed into "reeds" by flattening one end. The reed ends are carefully aligned with a small overlap and then permanently sealed inside the glass capsule. The overlap or contact area of the reeds is coated with special metals such as ruthenium. The nickel-iron leads are tin plated so that they can be soldered.
Benefits:
- Hermetically sealed switch contacts are not affected by and have no effect on their external environment
- Can be used as changeover or normally closed contact
- Zero operating power required for contact closure
- Excellent for switching micro-controller logic level loads
A miniature changeover switch with a 14.73mm long x 2.54mm diameter (0.580" x 0.100") glass envelope.
The Reed Body Measures 0.580" Long. 0.100" Diameter Length with leads is Approximately 1.60" Long
Note: Hamlin Products are now Littelfuse products.
Note: Price is for 1 Glass Reed Switch
Applications:
- Position sensing
- Industrial controls
- Office equipment
- Home appliances
