Enclosure

Plast-A-Matic - Project Box Enclosure.

Instrument Enclosure, 2 piece top & bottom.

Snaps together, requires 4 screws (not included).

Front panel would be approximately 5.25"wide x 2.5" tall (not included).

Material: Plastic.

Actual Dimensions: 138 x 71 x 130mm deep.

Color: Gray.

Learn More

Enclosure. Black plastic box with mostly transparent cover. Dimensions: 3.3"square 1.4"D overall OD, 3.0" square x 1.1"Deep ID. One slot in the side for an RJ jack 0.56 x 0.68" and an oval hole about 1.5" high in the back for mounting. 2.5 oz. Learn More

MS-308 Enclosure.

Flange Mount with Lids.

Material: Sturdy Ridgid Plastic, Black.

Dimensions: 7.5" x 4.5" x 2.25" OD less 0.7" wide flanges with four mounting holes.

Metal inserts for seccuring front cover panel.

Box has irregular 1" x 1.16" hole for Molex connector or other exit and three 0.157" holes in bottom.

Learn More

Hardware, enclosure. Material: plastic. Dimensions: 2.4" wide x 1" deep x 4.6" high. Has one slot 1.9" x 0.1" in one end, and one mounting tab with 0.2" hole. Color: black. Complete with lid. Package of 2. Learn More

MS-232 Enclosure, Project Box.

Ribbed Box with Battery Compartment.

Material: Durable Plastic.

Dimensions: 4.9" long x 4.6" wide x 1.3" high with 3 mount feet.

Overall 6" wide with feet.

Color: Black.

Learn More

Metal Enclosures 3.107" wide x 2.5" tall x 2" deep ( 2-parts), no side panels.( ID: 3" x 2.3" x 1.8" ) (See P/N 0270063-08 for lid) Learn More

Electrical interlock kit for 30A switch. 1NO 1NC 1A. Weight: 1 lb. Learn More

Russell - Hazel - BoxORC1 Enclosure.

Tool case with snap lid.

Material: Vinyl, slightly padded and reinforced.

Dimensions: 7 x 4 x 1" deep.

Application: For your keepsakes, small tools, replacement parts, etc.

Color: Black.

Learn More

HOFFMAN - 6960B - wall Mount Steel Enclosure.

Heavy Duty.

Material: Mild Steel.

Seams continuously welded and ground smooth.

Four Internal Weldnuts provided for mounting optional panels or terminal block kits.

External Mount: 4-hole wall mounting flange 0.75" wide on each end (4) - 7/8" conduit holes, two on one long side, one at either end. Steel thickness: 0.085".

Approximate Dimensions: 8" wide x 10.0" high x 4.00" deep. (ID: 7-3/4" x 8-3/4" x 3-7/8" high).

Color: Gray.

Application: Ideal for a broad range of applications, the enclosure’s screw cover is not included but would have been secured in each corner for a positive seal but easily removed. 

Note: Does not include Screw-on Cover.

Note: Enclosure are very heavy and require additional shipping charges dependent upon destintation. 

Learn More

BUD INDUSTRIES - 60-2380-WH - Rack Shelf.

From steel to aluminum, plastic to fiberglass, the Bud line of enclosures and racks is the most extensive and often the most affordable.  Shelves are one-piece, 16-gauge steel with flanged front and rear to support up to 200 lbs. All shelves come with necessary mounting hardware. Additional brackets are furnished to allow flexibility in mounting. Shelves allow sufficient room in rear for cables and power outlet strips. 

Racks & Rack Cabinet Accessories Non-Ventilated Shelf

19" White RAK Shelf 19" across x 19.25" deep and 0.75" high.

Unit Weight: 7.5 lbs.

Note: Orders over 5 lbs require additional shipping charge dependent upon destination.

Alternate P/Ns: Mouser 563-SH-2380, Newark 05M4595 

Learn More

TF-020215 Enclosure. Project box, without lid.

Dimensions: 1.85" long x 1.83" wide x 1.46" high.

Mounting ears each side.

Color: Black. No lids.

Learn More

Enclosure. Two part. Material: plastic. Dimensions: 5.5" x 4.5" x 1.75". Two long mounting holes, small 1.6" wide access slot in rear 0.3" high. Color: black. Learn More

Quad CD Jewel Case

Sturdy Hard Polystyrene

Holds 4 cd's.

Learn More

Enclosure, plastic. Telephone access box with a 50 pin male centronics to (8) 6 pin phone jacks. Learn More

Enclosure. For handheld instruments. Material: plastic. Learn More

Hardware, enclosure. Project box with foldable fake 900MHz antenna. Dimensions: 4-1/4" x 4" x 1". Screws on bottom to open. Learn More

HIRSH CO. - TST1 TST2 TRST3 TST4 Switch and outlet box.

12Amp 125VAC 60Hz 3/4HP.

Complete with attached 3 Conductor 18" power cord.

Dimensions: 5"wide with mounting brackets 2.5" tall and 1.8" deep.

Note: CAT No. 6N679. LR48823.

Listed CSA.

Learn More

Hardware, enclosure. Weatherproof mounting box only. Back Box. For Edwards Signaling 340 6" or 10" Adaptahorns. Color: gray. More info: http://www.edwards-signals.com/index.cfm?pid=185 Learn More

Transparent plastic cover for 1 phase and 3 phase relays. 06WX8224. More info: http://www.crydom.com/en/Products/Catalog/covers.pdf Learn More

Enclosure. Steel cabinet, 15" long x 12" wide x 4" deep, 0.065". Non-removable hinged steel cover closed with two screws. Heavy cover has one punched slot 1" x 0.47" and has four 1/4" holes in the rear for mounting. Has 2 fuseholder knockouts, 2 D25 holes and 1 MS-conn hole and a general purpose rectangle 1.24"x1.58" area. Weight: 10 lbs. Learn More

Enclosures. Telephone or computer box. Flush mount 5-1/4" L x 3-1/4" wW x 2-5/16" Tall. Outlet Box. Color: beige. Learn More

new SHIPPING CONTAINER with nice black foam inside. OD: 23"w x 20"d x 14"h Learn More

BYRD Sur-Temp Enclosure - DST-FH - MS-288 - 3" Round Enclosure.

Ensure used for Digital Sur-Temp DST-FH for Marine Temperature Monitoring 

3" Round Enclosure 1.68" thick

2 PieceEnclosure with rear cover (See Pictures).

Protective Covered Display window measure approximately .5" X .75" 

No sensor or display. Enclosure only.

Great for projects or hiding cameras.

Made in USA

Learn More

Hardware, enclosure. Small parts box with lid. Material: plastic, pink. Dimensions: 2-1/8" x 3/4" tall with lids. Please note: These boxes are extremely hard to open after closed without breaking. Package of 10. Learn More