Heat Sinks

Hardware, heatsink. For TO-220 components. 10 Fin. Material: aluminum, black anodized. Vertical mount. Dimensions: 1.18" x 1"wide x 0.5" high. Predrilled for devise with one 0.15" / 3.8mm hole, bottom is flat, no tabs or nubs. Package of 10.

Learn More

Aavid Thermalloy - 2228B - 322805B0000 - TO-39 / TO-5 Heatsink.

low cost, easily installed, push-on heat sink. This device may be installed after assembly and takes up little additional board space.

Passive heat sink with 3 cooling fins for increased thermal performance

For TO-39 or TO-5 components.

Thermal Resistance: 40 C/W  - 3.0 Watt

Material: Black Anodized Aluminum.

Nominal Dimensions: 0.75" D x 0.4" high. (22.23mm x 13.49mm)

RoHS Compliant

Replacement for NTE401 -NSN 5999-00-873-3812 Features

Overall Height: 0.531 inches nominal

Material Document and Classification: QQ-A-225/6 fed spec single material response

Surface Treatment Document and Classification MIL-A-8625, type 2, class 2 mil spec single treatment                      response

Learn More

Thermalloy/Aavid - 507222B00000 Hardware, heatsink.

For two TO-220 Components.

Dewscription: 12 Fin.

Material: Black Anodized Aluminum.

Dimensions: 1.47 x 1.75" x 0.38" tall (37.4mmL x 44.5mmW x 9.7mm).

Vertical or horizontal Mount. 

Thermal Resistance: 9.6 C / W.

Power dissipation 8W @ 70 Degree C.

Rohs Compliant.

More info: www.aavidthermalloy.com/cgi-bin/stdisp.pl?Pnum=507222b00000g

Cross Reference: 6072B

Package of 10.

Learn More

Hardware, heatsink. For TO-3 components. Black, lightweight material. Dimensions: 45.8mm (1.806") square x 32.2mm (1.271") tall and has 20-fins, 5 each side. ID 1.67" and has (2) 6/32 threaded rivets on bottom. Learn More

Hardware, heatsink. 12 Fin. Material: black anodized aluminum. Dimensions: 4" long x 2.5" wide x 1-11/16" high. Mounting surface: 1.25" long x 2.5" wide, one drilled hole centered and 11/16" from edge. Two 4-40 mounting holes in edge face on 1.59" centers. Learn More

Hardware, heatsink. Heavy, virgin surface 0.18" thick. Dimensions: 1-3/4" square x 7/16" high, four mounting holes 2-1/8" diameter. Learn More

Hardware, heatsink. Square bar. Black anodized. Dimensions: 5.3" x 0.75" x 0.77". Learn More

Thermalloy/Aavid - 531202B02500 Hardware, heatsink.

TO-202 Package 7.00 C/W Thermal Resistance Heat Sink with Radial Fins

For TO-220 components.

Black anodized.

Vertical mount.

Dimensions: 2" tall, 0.5" thick x 1.4" wide.

Two 2.5mm pins 1" apart. Other Aavid P/N is 6100B.

 

Learn More

Hardware, heaksink. Lockheed assembly 6133771-3 with 8 displays. Material: aluminum alloy 2024. Dimensions overall: 6.870" long x 0.812" high x 1.120" wide. Military NSN 5999-01-097-3865. Learn More

16" X 12.25" X 1" Aluminum housing holding four Copper with Nickel plate Liquid Heat Transfer blocks. Approximately 67" length of tubing 0.38"OD. Two threaded In & Out connectors 0.44" ID. - RMS surface finish 64 max. - Weighs a hefty 14-pounds Before shipping. Learn More

TO-220 Mountable black heatsinkOverall 1.635" wide + 1"deep + 0.710" off board. Learn More

Hardware, heatsink. With (2) attached voltage regulators, SH323KC TO-3. Positive 5V 3Amp. Dimensions: 6-1/2" x 3-3/4". Used/RFE. Learn More

New Heatsinks 1" wide x 1/4" deep x 1 1/2" high with mt tabs.Pcb mount for TO-220, TO-202 transistors/scr's etc.

Learn More

Hardware, heatsink. For TO-3 components. Black. 8 Fin. Dimensions: 4-1/16" long x 3" wide x 1" high, rectangular. Learn More

Thermalloy/Aavid - 534202B03453 Heatsink.

For TO-220, TO-218 or TO-247 components.

Mounting Style: Through Hole

Heat Sink Matewrial: Aluminum

Color: Black

More info: http://www.aavidthermalloy.com/cgi-bin/stdisp.pl?Pnum=534202b03453g

Learn More

Hardware, heatsink. Hardware kit only. For TO-18/TO-72 heatsinks. Note: 276-017-0005 (E). Learn More

Hardware, heatsink. For TO-3 components. Material: anodized aluminum, thin. Black. With five 1" Fins per side. Dimensions: 1.78" square x 1.3" high. Mount centers: 1-3/16". Learn More

Hardware, heatsink. For TO-3 components. Black. Dimensions: 1-13/16" square x 1/2" high, with 5-staggared fins each side. Learn More

CONCORD - 12-14255-04 Hardware, Heatsink.

Aluminum Extrusion with Ten Cooling Fins

Heatsink with fasteners for Two - TO-3 Device (Transistor, Diodes, Voltage Regulators, SCRs, LEDs, etc.)

Dimensions: 3.306" long x 1.758" wide x 1.810" high.

Mount centers: 2.962".

Marked THM 12-14255-05.

Heavy Duty

9

Learn More

Thermalloy/Aavid - 9-764 - Heat RADiator

Black Anodized Aluminum Heat Sink

Two Screw Tabs

Dimensions: 1.75 x 0.5 x 1.76"H

530192B40162

Learn More

Thermalloy/Aavid - 501200B00000 - 501200B00000G - Hardware, Heatsink. For 14 or 16 Pin DIP

Epoxy Glue on Attachment

Black Anodized Extruded Heat Sink w/ Straight Fins for use with DIP 14 or 16

Thermal Resistance: 68.00 (Thermal resistance value is based on a 75°C rise in natural convection)

Dimensions: 0.730 L X 0.250 W X 0.190 high (187.57 X 6.35 X 4.83mm) 

Alternate/Cross: 6012B

VIS#001128

New Old Stock

Learn More

Thermalloy Aavid - THM6073 - 507302B00000G - Hardware, Heatsink

Economy, narrow base, low profile channel style heat sink is perfect for use on printed circuit boards with 0.500 inch centering. When mounted horizontally, the total height of the heat sink is just 0.380

Heatsinks for TO-220 black 3/4" x 3/4" and 7/8" deep (19X19X9MM)

TO-220 & SCR mounting

Additional Information http://www.aavidthermalloy.com/cgi-bin/stdisp.pl?Pnum=507302j00000g

Learn More

Thermalloy/Aavid - 529802B02500 Heatsink.

For one TO-220 component.

Material: aluminum.

Mount: bolt on or PCB vertical with pins. D

imensions: 41.91mm x 25.40mm x 38.1mm (1.5") high.

Power Dissipation @ Temperature Rise10W @ 50C.

Thermal Resistance @ Forced Air Flow 3.0C/W @ 200 LFM.

Thermal Resistance @ Natural 3.7C/W.

Learn More

Heatsink. For TO-220 components. Mounting clip. Fin type: channel. Material: Tin plate, copper. hermal Resistance: 28.3 C / W. Dimensions: 13.08mm long x 13.21mm wide x 19.81mm high. Learn More