Knobs
-
MAGNAVOX - 6-351 - Hardware, Knob. For 1/4" Flat / Flattened Shaft. Knurl EdgeIN STOCK - MORE THAN 1,000 READY TO SHIP!MAGNAVOX Hardware, Knurled Knob.
For 1/4" Flat Flattened shaft.
Knurled edge for fingertip.
Material: Spun aluminum over plastic base.
Dimensions: 1-1/8" D x 0.882" high.
Has a 3/16" indicating line on top.
Color: Satin Silver. Nice Stereo/Amplifier Volume or tuning knobs.
Note: May in fact be only 6mm flattened shaft. Will fit our 1/4" shaft extender, but tight.
Similar to TE Connectivity KLN1250A1/4
See our large collection of knobs here:
https://www.electronicsurplus.com/hardware/knob
Learn More -
ALCO KNOB - 6-347 - Hardware, Knob. For 1/4" / 6mm Half Flatted D Shaft.IN STOCK - MORE THAN 500 READY TO SHIP!ALCO KNOB Hardware, Knob. Knurled
Design: Knurled, Straight
Indicating. Press-fit for 1/4" Flat Flatted D Shaft / 6mm Flattened D Shaft.
Two rows of surface control ridges around perimeter.
Material: Aluminum with Vertical Pointer and Internal Plastic Insert.
Dimensions: 0.85" OD x 0.88" High. (21.7 X 22.36mm)
Color: Satin Silver.
Will fit 1/4" Shaft but tight.
Simliar to TE Connectivity KN700A1/4, KN700B1/4
Applications: Stereos, Amplifiers, Instrumentation, Guitar, Volume, Tone, Balance Controls.
Vintage - New Old Stock
Learn More -
KNOBS INC - Berkeley - 144010-2 - Hardware, Knob Cap. For Slide Potentiometers.KNOBS INC - Berkeley - 144010-2 - Hardware, Knob Cap.
Slide-on Mixer/Fader Caps
Upgrade the cosmetics on Older Studio Graphic Equalizers.
For Slide Potentiometers having standard rectangular metal shaft measuring 0.155" x 0.047" (4mm X 1.2MM).
Material: Black Anodized Aluminum Shell, Silver Lined Cap with Nylon Insert
Overall Dimensions: 0.355" x 0.21" x 0.8" Long (9mm X 5.37mm X 20.35mm).
Rectangular / Oval Ends, Very Sharp.
New Old Stock
Applications: High End Audio Multimix and many other model Audio Equalizer Consoles, Instrumentation, Amplifiers or DJ Equipment.
Check shaft measurement, Used on some Moog, Rogue, Behringer, ALPs, Tascam, Akai, Mackie, Yamaha, Soundcraft, Pioneer equipment.
Proudly Made in USA
Learn More -
ELMA - 020-3325 - Hardware, Knob - Classic Collet Instrument Knob, 14.5mm, For 4mm Shaft.IN STOCK - MORE THAN 1,000 READY TO SHIP!ELMA - 020-3325 Hardware, Knob.
› Precise quality knobs
› Secure collet mountingFor 4mm Round Shaft Diameter.
Knurled without Indication Line.
Precision Swiss quality made modular collet.
Dimensions: 14.5mm Diameter x 17 mm High.
Black Matte, Brass Insert.
Has a screw on top to tighten.
Front cover cap 040-3025 purchased separately.
Suitable Applications: Switches
RoHS Compliant
Learn More -
ALCOKNOB - KNP-900B 1/8 - Equipment, knob. For 1/8" shaft, Stereos, Amplifiers, Instrumentation.Special Price $5.98 Regular Price $8.00IN STOCK - MORE THAN 100 READY TO SHIP!ALCO KNOB - KNP-900B Series KPN Knob.
Status: Discontinued
Fits 1/8" shaft, with one set screw.
Heavy, Silver. - Stright Knurled
Matrial: Black Anodized Aluminum with Vertical Pointer.
Dimensions: 0.931 OD x 0.54" high. (33.6 X 13.7 mm)
Applications: Stereos, Amplifiers, Instrumentation. Vintage - Newer Used - Genuine Alco - New Old Stock
Learn More -
ACME - 6-349 - Hardware, Knob. 1/4" Flattened D Shaft. Stereo , Control, Volume, HI-FI, Amplifier. Package of 2Special Price $6.98 Regular Price $8.50IN STOCK - MORE THAN 1,000 READY TO SHIP!ACME Hardware, knob.
For 1/4" flattened shaft.
Black Band 0.74" around it for gripping easily.
Material: Attractive Chromed Aluminum.
Dimensions: 0.62" D x 0.90" high.
Color: Silver.
Note: The orientation of the indicator line is straight up from the center of the 1/4" (D) circle.
Upgrade your Old System with High Quality New Old Stock Knobs.
Applications: Stereos, Amplifiers, Instrumentation.
Vintage - New Old Stock
Package of 2
Learn More -
Unidentified MFG - 8-431 - Square Switch Cap, MIDI Controller Knob/Button/Cap For 0.131" Square Shaft . Black.IN STOCK - MORE THAN 1,000 READY TO SHIP!Hardware, MIDI Controller Knob/Button/CAP.
Square Switch Cap
Fits 0.135" Square or Retangular Shafts.
For Slide Control Products.
Material: Thermoplastic, Black.
Mounting Type: Slip-On
Dimensions: 0.5" Square x 0.46" tall. (12.7mm X 11.68mm)
Applications: Various Slide Switch and Potentiometers ie Equilizers, Audio, Instrumentation.
Learn More -
Unidentified MFG - 8-348 - Control/Instrumentation Knurled Knob with Pointer Indicator. For 1/4" Shaft, Splined ID.IN STOCK - MORE THAN 1,000 READY TO SHIP!Hardware, Control /Instrumentation Knob with Pointer Indicator.
Fits Standard 1/4" (0.250") Splined ID Shaft.
Push-on Design for Convenient Secure Attachment
Bar Skirted with Indicator Pointer.
Material: ABS Black Plastic.
Dimensions: 0.98" OD x 0.60" high.
Applications: Control Devices (potentiometer, tuner, etc.) on a Radio, Amplifier, Testing Equipment or Musical Instruments, etc.
Vintage - New Old Stock
Learn More -
Unidentified MFG - 8-162 - Knobs for 5.9mm Splined Shaft.Hardware, Knob. Knurled with Splined ID for 0.236" Shaft.
Dimensions: 4/40 Set Screw Included.
Overall at base 0.843" OD wide and 0.694 OD at top x 0.689 tall.
Base: ID is 0.662".
For a ribbed/slotted shaft: 0.234" (5.9mm).
Material: Plastic.
Color: Silver Chrome Plated.
Learn More -
Unidentified MFG - 6-185 - Control & Instrument Pointer Knob. For 1/4" Mount with Double Set Screws.IN STOCK - MORE THAN 500 READY TO SHIP!Control & Instrument Switch Pointer Knob.
For 1/4" mount with 2 set screws.
Molded-in metal insert tapped for for added strength.
Bakelite Construction with Decorative Cap and Directional Pointer.
Knurled Grip.
Approximate Overall Dimensions: 0.736" High X 0.731 Wide" X 1.206 Long (Pointer) (18.8 X 18.6 X 30.6 mm)
Applications: Instrumentation, Test Equipment, Amplifiers, Stereos, Radios, and Switches
Vintage - Never Used - New Old Stock - Military Quality.
Proudly Made in USA
Learn More -
Unidentified MFG - 345-0500 - Hardware, Equipment Instrumentation Knobs. 1/4" Flat Shaft. Ribbed Skirted Edges.IN STOCK - MORE THAN 500 READY TO SHIP!345-0500 Hardware, Equipment Instrumetation Control Knobs.
Silver on Black, 20mm ("0.80") Diameter, 13.45mm Tall (0.53").
Silver Cap and White Indicating Pointer.
Ribbed Skirted Edges for Solid Gripping.
Ready for 1/4" (6.4 mm) Potentimeter or Switch Control having a Flattened Shaft ("D-Shaped").
Push-On, no set screw but has a metal insert for added strength
Potentiometer Knob.
Material: Phenolic / Bakelite
Black w/White Line.
Vintage - New Old Stock.
Learn More -
CUSTOM - 8-647 - Hardware, knob. For 1/4" half shaft or "D" shaped stems, Dimmer Switches of Fans.Hardware, Knob.
- Replacement knob for trimatron devices
- Slides on to dimmer shaft
- Fits most rotary dimmers and fan speed controls
For 1/4" half shaft. "D" Shaped Stem.
Material: Plastic, Black with Gold face.
OFF - LOW and CW arrow.
Dimensions: 1.5" OD x 0.5" high.
Nice knob for Fans and Dimmer switches.
Alternate/Replacment: Levitron R61-26115-00I, Amertec-Westek 947
Applications: Light Dimmer and Fan Controls
Note: When replacing a round dimmer knob, be sure to look at the back to see which type of stem is compatible. Leviton dimming devices have a "D" shaped stem, which fits easily into round replacement knobs with a "D" shaped stem opening.
Learn More -
Unidentified MFG - 8-008 - Hardware, Knob. For 1/4" Flattened Shaft.Special Price $0.98 Regular Price $1.95IN STOCK - MORE THAN 1,000 READY TO SHIP!Hardware, Knob.
For 1/4" Flattened Shaft.
Silver Cap.
Dimensions: 0.50" OD x 0.42" high.
Color: Black.
Vintage - New Old Stock
Learn More -
Hammond - 8-417 - Equipment Chassis Handles. Package of 2.Special Price $4.98 Regular Price $6.50Hammond Equipment Chassis Handles.
Status: Discontinued
Offset Round Handle
Black Anodized Aluminum.
Approx 4-3/4" long (offset), stands 1.25" off panel with 4-9/16" ctrs.
10/32 Threaded Hole Pull Handle
Package of 2.
Learn More -
Unidentified MFG - 8-113 - Hardware, Knob. For 1/4" Half Flattened or "D" shaped Shaft.Special Price $3.98 Regular Price $6.00IN STOCK - MORE THAN 500 READY TO SHIP!Hardware, Knob. For snap-on 1/4" half flattened or "D Shaped" Shaft.
No set screw.
Material: Plastic, black.
With indent Finger Touch Control.
Dimensions: 1-1/4" Diameter x 5/8" High.
Vintage - New Old Stock
Learn More -
Unidentified MFG - 6-350-1 - Hardware, knob. Silver knob for slide control.Hardware, Knob. Silver Knob for Slide Control.
Fits Shaft: 0.189" (4.8mm) x 0.188" (4.7mm).
Dimensions: 5/8" square x 1/2" high.
Almost Perfectly Square.
Learn More -
Unidentified MFG - 6-348 - Hardware, Knobs. For 0.236" Half Flattened Shaft.IN STOCK - MORE THAN 100 READY TO SHIP!Hardware, Plastic Control Knobs. Push-on "D" Knob
For 0.236" Half Flattened Shaft.
Knurled only on the top for finger control, with pointer.
Material: Plastic.
Dimensions: 1.089" OD, 0.928" ID and 0.885" tall.
Color: All Silver. - Perfect for Amplifiers
Vintage - New Old Stock
Learn More -
SIFAM - SP211-125 - Hardware, Knobs. For 1/8" Shaft, 21mm with Indicator.SIFAM - SP211-125 - Hardware, Knobs.
For 1/8" shaft, with Indicator, 21mm.
No Cap Insert.
Dimensions: Overall Body is 0.833 inch OD x 0.676 inch tall.
Color: Gray.
Learn More -
ROGAN BROTHERS - 6-037 - Pointer Hardware, Knob. For 1/4" Flattened Shaft. Guitar Amplifier, RadioSpecial Price $3.98 Regular Price $5.00READY TO SHIP - ONLY 70 LEFT IN STOCK!ROGAN BROTHERS Hardware, knob. Guitar Amplifier, Radio
For 1/4" Flattened Shaft.
Dimensions: 1.267" Diameter x 0.57" High (32.18mm X 1.45mm)
With Top Molded Pointer.
Color: Black.
Material: Bakelite
Vintage - New Old Stock
Made in Skokie Ill USA
Learn More -
ROGAN BROTHERS - 8-336 - Hardware, knob. For 1/4" shaft. Dual Bar, Guitar Audio AmplifierSpecial Price $12.98 Regular Price $14.50READY TO SHIP - ONLY 9 LEFT IN STOCK!ROGAN BROTHERS - 8-336 Hardware, knob. Guiart Audio Amplifier
For 1/4" shaft,
Bushing with two set screws.
Metal Collett.
Material: Heavy Plastic, Black. ABS
Dimensions: 1-3/4" OD, 2 bars / ears that stick out 1/2" on each side.
Inlay Silver top.
Vintage New Old Stock
Learn More -
ALCO ELECTRIC - 6-133 - Hardware, Knobs. For 1/8" shaft. Blue.ALCO ELECTRIC - 6-133 Hardware, Knobs.
Instrument Knobs for 1/8" shaft, with Indicator Line.
Brass Insert.
Dimensions: 7/8" D x 13/16" Max Height.
Color: Blue.
Learn More -
ACME - 6-001 - Hardware, knob. For 1/4" flattened shaft.Out of stockHardware, knob. For 1/4" flattened shaft. Material: plastic. Tapered top 0.46" D down to the skirt 0.8" D. Nice Stereo Indicator. With black insert on top with white line. Color: silver. Learn More -
Unidentified MFG - 8-805 - Hardware, knob. For 1/4", half flat shaft w/pointer.READY TO SHIP - ONLY 17 LEFT IN STOCK!Hardware, knob.
For 1/4", Half Flattened Shaft w/Pointer.
Material: Plastic.
Color: Brown.
Dimensions: 0.940" D x 0.478" High.
Vintage - New Old Stock
Learn More -
ALCOKNOB - KNP-900A 1/8 - Hardware, knob. For 1/8" shaft.Special Price $5.98 Regular Price $8.00READY TO SHIP - ONLY 47 LEFT IN STOCK!ALCO KNOB - KNP-900A Series KPN Knob.
Status: Discontinued
Fits 1/8" shaft, with one set screw.
Heavy, Silver. - Stright Knurled
Aluminum with Vertical Pointer.
Dimensions: 0.931 OD x 0.54" high. (33.6 X 13.7 mm)
Applications: Stereos, Amplifiers, Instrumentation. Vintage - Newer Used - Genuine Alco - New Old Stock
Learn More
