Knobs

DAKA-WARE - Davis Molding - 197267A1 - Hardware Fluted Finger Grip Knob.

Heavy Duty Knob for 1/4" (6.35mm) - 28 Shaft.

Twelve Flute Knob

Material: Compression Molded Phenolic (Bakelite)

Stronger & More Durable than Plastic

Color: Black 

Approximate Dimensions: 1.750" OD x 1.015" Depth With 0.075 Pilot Diameter

Molded-In Brass Insert threaded 1/4" - 28 over 0.50" Deep

Genuine Vintage DAKA-WARE - New Old Stock

Made in Chicago USA

 

Learn More

MAGNAVOX Hardware, Knurled Knob.

For 1/4" Flat Flattened shaft.

Knurled edge for fingertip.

Material: Spun aluminum over plastic base.

Dimensions: 1-1/8" D x 0.882" high.

Has a 3/16" indicating line on top.

Color: Satin Silver. Nice Stereo/Amplifier Volume or tuning knobs.

Note: May in fact be only 6mm flattened shaft. Will fit our 1/4" shaft extender, but tight.

Similar to TE Connectivity KLN1250A1/4

See our large collection of knobs here:

https://www.electronicsurplus.com/hardware/knob

Learn More

ALCO KNOB Hardware, Knob. Knurled

Design: Knurled, Straight

Indicating. Press-fit for 1/4" Flat Flatted D Shaft / 6mm Flattened D Shaft.

Two rows of surface control ridges around perimeter.

Material: Aluminum with Vertical Pointer and Internal Plastic Insert.

Dimensions: 0.85" OD x 0.88" High. (21.7 X 22.36mm)

Color: Satin Silver.

Will fit 1/4" Shaft but tight.

Simliar to TE Connectivity KN700A1/4, KN700B1/4

Applications: Stereos, Amplifiers, Instrumentation, Guitar, Volume, Tone, Balance Controls.

Vintage - New Old Stock

Learn More

KNOBS INC - Berkeley - 144010-2 - Hardware, Knob Cap.

Slide-on Mixer/Fader Caps

Upgrade the cosmetics on Older Studio Graphic Equalizers.

For Slide Potentiometers having standard rectangular metal shaft measuring 0.155" x 0.047" (4mm X 1.2MM).

Material: Black Anodized Aluminum Shell, Silver Lined Cap with Nylon Insert

Overall Dimensions: 0.355" x 0.21" x 0.8" Long (9mm X 5.37mm X 20.35mm).

Rectangular / Oval Ends, Very Sharp.

New Old Stock

Applications: High End Audio Multimix and many other model Audio Equalizer Consoles, Instrumentation, Amplifiers or DJ Equipment.

Check shaft measurement, Used on some Moog, Rogue, Behringer, ALPs, Tascam, Akai, Mackie, Yamaha, Soundcraft, Pioneer equipment.

Proudly Made in USA

Learn More

ELMA - 020-3325  Hardware, Knob.

› Precise quality knobs
› Secure collet mounting

For 4mm Round Shaft Diameter.

Knurled without Indication Line.

Precision Swiss quality made modular collet.

Dimensions: 14.5mm Diameter x 17 mm High.

Black Matte, Brass Insert.

Has a screw on top to tighten.

Front cover cap 040-3025 purchased separately. 

Suitable Applications: Switches

RoHS Compliant

Learn More

DAKA-WARE - Davis Molding - DAK-P1105-27 - 1914-AS - Hardware, Instrument Knob.

For 1/8" (6.35 mm) shaft, with set screw.

Eight Knurled/Raised/ Ribbed Edges for ease of gripping.

Material: Compression Molded Phenolic Knobs

Black with Silver/Brushed Aluminum Tone Face and pointer.

Dimensions: 0.745"OD x 0.487" high. (21-30 mm)

New Old Stock

Made in Chicago USA

Lot of 2

Learn More

ALCO KNOB - KNP-900B  Series KPN Knob.

Status: Discontinued

Fits 1/8" shaft, with one set screw.

Heavy, Silver. - Stright Knurled

Matrial: Black Anodized Aluminum  with Vertical Pointer.

Dimensions: 0.931 OD x 0.54" high. (33.6 X 13.7 mm)

Applications: Stereos, Amplifiers, Instrumentation. Vintage - Newer Used - Genuine Alco - New Old Stock

 

Learn More

ACME Hardware, knob.

For 1/4" flattened shaft.

Black Band 0.74" around it for gripping easily.

Material: Attractive Chromed Aluminum.

Dimensions: 0.62" D x 0.90" high.

Color: Silver.

Note: The orientation of the indicator line is straight up from the center of the 1/4" (D) circle.

Upgrade your Old System with High Quality New Old Stock Knobs.

Applications: Stereos, Amplifiers, Instrumentation.

Vintage - New Old Stock 

Package of 2

Learn More

Hardware, MIDI Controller Knob/Button/CAP.

Square Switch Cap

Fits  0.135" Square or Retangular Shafts.

For Slide Control Products.

Material: Thermoplastic, Black.

Mounting Type: Slip-On

Dimensions: 0.5" Square x 0.46" tall. (12.7mm X 11.68mm)

Applications: Various Slide Switch and Potentiometers ie Equilizers, Audio, Instrumentation.

Learn More

Hardware, Control /Instrumentation Knob with Pointer Indicator.

Fits Standard 1/4" (0.250") Splined ID Shaft.

Push-on Design for Convenient Secure Attachment

Bar Skirted with Indicator Pointer.

Material: ABS Black Plastic.

Dimensions: 0.98" OD x 0.60" high.

Applications: Control Devices (potentiometer, tuner, etc.) on a Radio, Amplifier, Testing Equipment or Musical Instruments, etc.

Vintage - New Old Stock

Learn More

Hardware, Slider Knobs.

For Slide Potentiometers.

For Shaft: 0.159" x 0.060" thick.

Material: Plastic, Black with Silver Top.

With Tiny Pointer on one side.

Dimensions: 0.635" long x 0.390" deep x 0.521" high.

Package of 10.

Learn More

GOULD - 00457313 - Hardware, Knob/Cap.

For pushbutton switches.

Rectangular cap/knob.

Material: PVC, gray.

Dimensions: 7.0 x 2.5mm in front, 8.6x4.0mm flange at back.

ID is approximately 5.1 x 1.5mm.

Package of 10

Learn More

Hardware, knobs. Slide pot knobs. Color: white. Dimensions: 9.8mm wide (0.387") x 5.5mm (0.219") deep x 11.1mm (0.438") high. Red and Black are available also. Note: I actually thick these knobs are better suited for P/B switch banks. They will fit a shaft 3.6mm x 2.4mm, but will sit parallel to slide pot. Package of 10. Learn More

Hardware, Knob. Knurled with Splined ID for 0.236" Shaft.

Dimensions: 4/40 Set Screw Included. 

Overall at base 0.843" OD wide and 0.694 OD at top x 0.689 tall.

Base: ID is 0.662".

For a ribbed/slotted shaft: 0.234" (5.9mm).

Material: Plastic.

Color: Silver Chrome Plated.

Learn More

Unidentified MFG - 285653-1 - Hardware, Knob.

For 1/4" Shaft with two Set Screws.

Beige with Directional Indicator.

Dimensions: 11/16" D x 3/4" High.

Note: Top Cap not Included.

Learn More

Control & Instrument Switch Pointer Knob.

For 1/4" mount with 2 set screws.

Molded-in metal insert tapped for for added strength.

Bakelite Construction with Decorative Cap and Directional Pointer. 

Knurled Grip.

Approximate Overall Dimensions: 0.736" High X 0.731 Wide" X 1.206 Long (Pointer) (18.8 X 18.6 X 30.6 mm) 

Applications: Instrumentation, Test Equipment, Amplifiers, Stereos, Radios, and Switches

Vintage - Never Used - New Old Stock - Military Quality.

Proudly Made in USA

Learn More

Hardware, knobs. For potentiometers/trimpots, flat style. Color: white. Package of 10. Learn More

345-0500 Hardware, Equipment Instrumetation Control Knobs.

Silver on Black, 20mm ("0.80") Diameter, 13.45mm Tall (0.53").

Silver Cap and White Indicating Pointer.

Ribbed Skirted Edges for Solid Gripping.

Ready for 1/4" (6.4 mm) Potentimeter or Switch Control having a Flattened Shaft ("D-Shaped"). 

Push-On, no set screw but has a metal insert for added strength

Potentiometer Knob.

Material:  Phenolic / Bakelite

Black w/White Line.

Vintage  - New Old Stock.

Learn More

Hardware, knobs. For potentiometers/trimpots, flat style. Color: white. Package of 10. Note: Perfect fit for our P/N: MS-022, SKU 5942 pot, not included. Learn More

Hardware, knob. For switch banks with a square 1/8" shaft. material: plastic. Dimensions: 0.29" D x 0.272" high. Color: white. Package of 5. Note: Perfect fit for a switch bank like our SKU 1772, not included. Learn More

Hardware, Knob.

• Replacement knob for trimatron devices
• Slides on to dimmer shaft
• Fits most rotary dimmers and fan speed controls

For 1/4" half shaft. "D" Shaped Stem.

Material: Plastic, Black with Gold face.

OFF - LOW and CW arrow.

Dimensions: 1.5" OD x 0.5" high.

Nice knob for Fans and Dimmer switches.

Alternate/Replacment: Levitron R61-26115-00I, Amertec-Westek 947

Applications: Light Dimmer and Fan Controls

Note: When replacing a round dimmer knob, be sure to look at the back to see which type of stem is compatible. Leviton dimming devices have a "D" shaped stem, which fits easily into round replacement knobs with a "D" shaped stem opening.

Learn More

Hardware, Knob.

For 1/4" Flattened Shaft.

Silver Cap.

Dimensions: 0.50" OD x 0.42" high.

Color: Black.

Vintage - New Old Stock

 

Learn More

Hardware, knob. For 1/4" shaft. Snap on. Knurled. Metal collett. Material: plastic, black. Dimensions: 1.277" D x 0.767" high. No set screws. Learn More

Hammond Equipment Chassis Handles.

Status: Discontinued

Offset Round Handle

Black Anodized Aluminum.

Approx 4-3/4" long (offset), stands 1.25" off panel with 4-9/16" ctrs.

10/32 Threaded Hole Pull Handle

Package of 2.

Learn More