Military Hardware
- UMPCO - MS21333-77 - Cushioned Loop Clamp, 1". ID. Package of 2.Special Price $3.98 Regular Price $6.50
UMPCO - MS21333-77 Hardware, cable clamps.
Aerospace Cushioned loop clamp, 1" ID. Tongue hole type, oil resistant.
Distance from loop center to tongue end: 1.125".
Center to center distance between loop and mounting hole: 0.906".
Overall width: 0.625".
Material: Steel, carbon with synthetic rubber mil grade Mil-R-3065.
Material Thickness: 0.032".
Military NSN 5340-00-922-6300.
More info: http://www.umpco.com/products_pdf/NASM21333.pdf
Package of 2.
Learn More - UMPCO - MS21333-75 - NSN 5340-00-050-2740 - Cushioned Loop Clamp, 3/4" ID.
UMPCO - MS21333-75 - NSN 5340-00-050-2740 - Hardware, Cable Clamps.
Cushioned Loop Clamp, 3/4" to 11/64" ID.
Tongue Hole Type, Oil Resistant.
Distance from loop center to tongue end: 1.0".
Center to center distance between loop and mounting hole: 0.781".
Overall width: 0.500".
Material: Steel, carbon with synthetic rubber mil grade Mil-R-3065.
Material Thickness: 0.032".
Military NSN 5340-00-050-2740.
More info: http://www.umpco.com/products_pdf/NASM21333.pdf
Price for One Clamp, Discounted for quantity purchases of 6 & 60.
Learn More - MSA - 7-201-1 - 460968 - Comfo II Custom Respirator Facepiece - Black, Size Medium$19.98Out of stock
MSA - 7-201-1 - 460968 - Comfo II Custom Respirator Facepiece - Black, Size Medium
The 460968 Half Mask Respirator is constructed of Hycar rubber with an elastic band.
Respirator, Face Piece - New Old Stock
Comes with 60 page manual.
Price is for one (1) Comfo II Respirator Facepiece without filter cartridges.
See SKU 32215 for MSA - 459322 - Comfo Respirator Filter Cartridges P100, Type H
- Military - MS51959-98 - Hardware, screw. 5/16-18 x 1". Package of 10.$6.00READY TO SHIP - ONLY 30 LEFT IN STOCK!
Hardware, screw. 5/16-18 x 1". Military Machine Screw. Phillips / Flat Head. Thread class: 2A. Thread direction: right-hand. Thread length: 0.809" min. Fastener length: 0.969" min and 1.00" max. Head style: A39 flat countersunk. Head diameter: 0.568" min and 0.635" max. Nominal thread diameter: 0.312". Thread quantity per inch: 18. Countersunk angle: 80 Deg min and 82 Deg max. Material: steel corrosion resisting. Package of 10.
Learn More - Military - MS51959-100 - Hardware, screw. 5/16-18 x 1-1/2". Package of 10.$6.00Hardware, screw. 5/16-18 x 1-1/2". Military Machine Screw. Phillips / Flat Head. Thread class: 2A. Thread direction: right-hand. Thread length: 1.389" min and 1.500" max. Fastener length: 1.500". Head style: A39 flat countersunk. Head diameter: 0.568" min and 0.635" max. Nominal thread diameter: 0.312". Thread quantity per inch: 18. Countersunk angle: 80 Deg min and 82 Deg max. material steel comp 302, 303, 304 or 316. Package of 10. Learn More
- Military - MS24693-C318 - Hardware, screw. 5/16-24 x 3/4". Package of 10.$6.00Out of stock
Hardware, screw. 5/16-24 x 3/4". Military Machine Screw. Phillips / Flat Head. Thread class: 2A. Thread direction: right-hand. Thread length: 0.667" min and 0.750" max. Fastener length: 0.750". Head style: A38 flat countersunk. Head diameter: 0.556" min and 0.635" max. Nominal thread diameter: 0.312". Thread quantity per inch: 24. Countersunk angle: 99 Deg min and 101 Deg max. Material: Steel comp 302, 303 or 304. Package of 10.
Learn More - Military - MS24693-C317 - Hardware, screw. 5/16-24 x 5/8". Package of 10.$6.00READY TO SHIP - ONLY 53 LEFT IN STOCK!
Military - MS24693-C317 Hardware, screw.
5/16-24 x 5/8".
Military Machine Screw. Phillips / Flat Head.
Thread class: 2A.
Thread direction: right-hand.
Thread length: 0.373" min and 0.487" max.
Fastener length: 0.594" min and 0.625" max.
Head style: A38 flat countersunk.
Head diameter: 0.556" min and 0.635" max.
Nominal thread diameter: 0.312".
Thread quantity per inch: 24.
Countersunk angle: 99 Deg min and 101 Deg max.
Material: Steel comp 302, 303, 304, 305, or 316.
Package of 10.
NSN 5305-01-475-9916
- Military - MS24693-C300 - Hardware, screw. 1/4-28 x 1-1/4". Package of 10.$5.00READY TO SHIP - ONLY 10 LEFT IN STOCK!
Hardware, screw. 1/4-28 x 1-1/4". Military Machine Screw MS24693 / Phillips / Flat 100. Thread class: 2A. Thread direction: right-hand. Thread length: 1.007" min and 1.140" max. Fastener length: 1.188" min and 1.250" max. Head diameter: 0.442" min and 0.507" max. Nominal thread diameter: 0.250". Thread quantity per inch: 28. Countersunk angle: 99 Deg min and 101 Deg max. Material: steel comp 302, 304, 305 or 316. Package of 10.
Learn More - Military - MS24693-C299 - Hardware, screw. 1/4-28 x 1-1/8". Package of 10.$5.00Hardware, screw. 1/4-28 x 1-1/8". Military Machine Screw / Phillips / Flat 100. Thread class: 2A. Thread direction: right-hand. Thread length: 1.054" min and 1.125" max. Fastener length: 1.125". Head style: A39 flat countersunk. Head diameter: 0.442" min and 0.507" max. Nominal thread diameter: 0.250". thread quantity per inch: 28. Countersunk angle: 99 Deg min and 101 Deg max. Material: steel comp 302, 303 or 304. Package of 10. Learn More
- Military - MS24693-C294 - Hardware, screw. 1/4-28 x 1/2 ". Package of 10.$5.00READY TO SHIP - ONLY 8 LEFT IN STOCK!
Military - MS24693-C294 Hardware, screw.
1/4-28 x 1/2".
Military Machine Screw / Phillips / Flat 100.
Thread class: 2A.
Thread direction: right-hand.
Thread length: 0.429" min and 0.500" max.
Fastener length: 0.500".
Head style: A39 flat countersunk.
Head diameter: 0.442" min and 0.507" max.
Nominal thread diameter: 0.250".
Thread quantity per inch: 28.
Countersunk angle: 99 Deg min and 101 Deg max.
Material: steel comp 302, 303 or 304.
Package of 10.
Learn More - Military - MS24693-C280 - Hardware, screw. 10-32 x 1-1/2". Package of 10.$4.00READY TO SHIP - ONLY 10 LEFT IN STOCK!
Hardware, screw. 10-32 x 1-1/2". Military Machine Screw. Phillips / Flat Head. Thread class: 2A. Thread direction: right-hand. Thread length: 1.438" min and 1.500" max. Fastener length: 1.500". Head style: A39 flat countersunk. Head diameter: 0.333" min and 0.385" max. Nominal thread diameter: 0.190" Thread quantity per inch: 32. Countersunk angle: 99 Deg min and 101 Deg max. Material: steel comp 203, 303 or 304. Package of 10.
Learn More - Major - 103X4 - 5330-00-775-4955 - Packing retainer, Hardware, washer. With internal rubber grommet.$1.00READY TO SHIP - ONLY 40 LEFT IN STOCK!
Major - 103X4 - 5330-00-775-4955 - Packing retainer, An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the PACKING, PREFORMED or O-RING, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine PACKING MATERIAL. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis.
DLA500-92-A-A850-4641A/C
Hardware, washer. With internal rubber grommet. Steel. Dimensions: 0.602" OD, 0.30 ID. Note: 2B144.
Military NSN 5330-00-775-4955 alternates - 9905691, 990569-1, 5330-00-775-9990, 00-775-9990, 5330007759990, 007759990.
Learn More - VLIER - SSB56N - SPRING LOADED BALL PLUNGERSpecial Price $7.49 Regular Price $10.005340-00-771-0021 STEEL/STAINLESS STEEL SPRING LOADED BALL PLUNGERQUICK RELEASE BARRY WRIGHT CORP VLIER ENGIEERING DIV 0.578 INCHES NOMINAL OVERALL LENGTH 0.618 INCHES NOMINAL THREAD QUANTITY PER INCH 18 NOMINAL THREAD SIZE 0.3125 INCHES SPECIAL FEATURES COLOR BLACK; NYLON LOCKING ELEMENT THREADS,CHROMIUM PLATED THREADS SHAPE ROUND THREAD SERIES DESIGNATOR UNC Learn More
- Unidentified MFG - TXBF032-025B - Hardware, heatsink.$10.00Out of stockHardware, heatsink. Military NSN 5999-00-992-9555 , 5999-00-789-3794. Learn More
- UMPCO - 1919WDG11 - Cushioned loop clamp, 0.688" OD.Special Price $1.49 Regular Price $2.00
UMPCO - 1919WDG11 Hardware, cable clamps.
Cushioned loop clamp, 0.688" OD.
Inside loop ID: 0.673 - 0.703" max.
Tongue hole type, oil resistant.
Distance from loop center to tongue end: 1.032".
Center to center distance between loop and mounting hole: 0.799" min to 0.829' maximum.
Overall width: 0.490".
Material: steel, carbon with synthetic rubber mil grade Mil-R-3065.
Material thickness: 0.050".
Military NSN 5340-00-664-8163.
More info: http://www.umpco.com/products_pdf/AS21919.pdf
Learn More - UMPCO - 5340-00-922-6300 - Cushioned Loop Clamp, 1" ID.Special Price $1.98 Regular Price $3.00Out of stock
UMPCO - 5340-00-922-6300 Hardware, cable clamps.
Cushioned loop clamp, 1" ID.
Tongue hole type, oil resistant.
Distance from loop center to tongue end: 1.125".
Center to center distance between loop and mounting hole: 0.906".
Overall width: 0.625'.
Material: steel, carbon with synthetic rubber mil grade Mil-R-3065.
Material thickness: 0.032".
Double marked MS21333-77.
Military NSN 5340-00-922-6300.
More info: http://www.umpco.com/products_pdf/NASM21333.pdf
- UMPCO - 5340-00-057-2904 - Mil-R-3065 -Cushioned loop clamp, 1/2" ID.Special Price $1.29 Regular Price $1.89
UMPCO - 5340-00-057-2904 - Mil-R-3065 - Hardware, cable clamps.
Cushioned loop clamp, 1/2" ID.
Tongue hole type, oil resistant.
Distance from loop center to tongue end: 0.875".
Center to center distance between loop and mounting hole: 0.656"
Overall width: 0.500".
Material: steel, carbon with synthetic rubber mil grade Mil-R-3065.
Material thickness: 0.032". Double marked MS21333-71.
Military NSN 5340-00-057-2904.
More info: http://www.umpco.com/products_pdf/NASM21333.pdf
Learn More - UMPCO - 5340-00-050-2740 - MS21333-75 -Cushioned loop clamp, 3/4" ID.Special Price $1.69 Regular Price $2.50
UMPCO - 5340-00-050-2740 Hardware, cable clamps.
Cushioned loop clamp, 3/4" ID. Tongue hole type, oil resistant.
Distance from loop center to tongue end: 1.0".
Center to center distance between loop and mounting hole: 0.781". Overall width: 0.500:
Material: steel, carbon with synthetic rubber mil grade Mil-R-3065.
Material thickness: 0.032".
Double marked MS21333-75.
Military NSN 5340-00-050-2740.
More info: www.umpco.com/products_pdf/NASM21333.pdf
Learn More - Semiconductor Technology Inc - 9000-513-0140 - Filter, Radio Frequency interference, Military.$22.00Filter, Radio Frequency interference, Military. Learn More
- Military - MS24693-C279 - Hardware, screw. 10-32 x 1-3/8". Package of 10.$4.00READY TO SHIP - ONLY 8 LEFT IN STOCK!
Hardware, screw. 10-32 x 1-3/8". Military Machine Screw. Phillips / Flat Head. Thread class: 2A. Thread direction: right-hand. Thread length: 1.313" min and 1.375" max. Fastener length: 1.375" nom. Head style: A39 flat countersunk. Head diameter: 0.333" min and 0.385" max. Nominal thread diameter: 0.190". Thread per inch: 32. Countersunk angle: 99 Deg min and 101 Deg max. Material: steel comp 302, 303 or 304. Package of 10.
Learn More - Military - 5919380-2 - MIL 09359 FLEX PRINTED CABLESpecial Price $19.95 Regular Price $27.00MIL 09359 FLEX PRINTED CABLE ADDITIONAL P/N 110A100-1 Learn More
- Matsushita - R6US4A - Hardware, spring. For the Avionics industry.Special Price $3.75 Regular Price $4.99Hardware, spring. For the Avionics industry. Note: Part code: 0159992116-0. Factory new, individually packaged. Learn More
- Military - NAS1635-02-10 - Hardware, screw. Philips 2/56 x 5/8" long. Package of 50.Special Price $3.00 Regular Price $5.00Hardware, screw. Philips 2/56 x 5/8" long. Package of 50. Learn More
-