Military Hardware
- MSA - 7-201-1 - 460968 - Comfo II Custom Respirator Facepiece - Black, Size Medium$19.98Out of stock
MSA - 7-201-1 - 460968 - Comfo II Custom Respirator Facepiece - Black, Size Medium
The 460968 Half Mask Respirator is constructed of Hycar rubber with an elastic band.
Respirator, Face Piece - New Old Stock
Comes with 60 page manual.
Price is for one (1) Comfo II Respirator Facepiece without filter cartridges.
See SKU 32215 for MSA - 459322 - Comfo Respirator Filter Cartridges P100, Type H
- UMPCO - 1919WDG11 - Cushioned loop clamp, 0.688" OD.Special Price $1.49 Regular Price $2.00
UMPCO - 1919WDG11 Hardware, cable clamps.
Cushioned loop clamp, 0.688" OD.
Inside loop ID: 0.673 - 0.703" max.
Tongue hole type, oil resistant.
Distance from loop center to tongue end: 1.032".
Center to center distance between loop and mounting hole: 0.799" min to 0.829' maximum.
Overall width: 0.490".
Material: steel, carbon with synthetic rubber mil grade Mil-R-3065.
Material thickness: 0.050".
Military NSN 5340-00-664-8163.
More info: http://www.umpco.com/products_pdf/AS21919.pdf
Learn More - UMPCO - 5340-00-922-6300 - Cushioned Loop Clamp, 1" ID.Special Price $1.98 Regular Price $3.00Out of stock
UMPCO - 5340-00-922-6300 Hardware, cable clamps.
Cushioned loop clamp, 1" ID.
Tongue hole type, oil resistant.
Distance from loop center to tongue end: 1.125".
Center to center distance between loop and mounting hole: 0.906".
Overall width: 0.625'.
Material: steel, carbon with synthetic rubber mil grade Mil-R-3065.
Material thickness: 0.032".
Double marked MS21333-77.
Military NSN 5340-00-922-6300.
More info: http://www.umpco.com/products_pdf/NASM21333.pdf
- UMPCO - 5340-00-057-2904 - Mil-R-3065 -Cushioned loop clamp, 1/2" ID.Special Price $1.29 Regular Price $1.89Out of stock
UMPCO - 5340-00-057-2904 - Mil-R-3065 - Hardware, cable clamps.
Cushioned loop clamp, 1/2" ID.
Tongue hole type, oil resistant.
Distance from loop center to tongue end: 0.875".
Center to center distance between loop and mounting hole: 0.656"
Overall width: 0.500".
Material: steel, carbon with synthetic rubber mil grade Mil-R-3065.
Material thickness: 0.032". Double marked MS21333-71.
Military NSN 5340-00-057-2904.
More info: http://www.umpco.com/products_pdf/NASM21333.pdf
Learn More - UMPCO - 5340-00-050-2740 - MS21333-75 -Cushioned loop clamp, 3/4" ID.Special Price $1.69 Regular Price $2.50
UMPCO - 5340-00-050-2740 Hardware, cable clamps.
Cushioned loop clamp, 3/4" ID. Tongue hole type, oil resistant.
Distance from loop center to tongue end: 1.0".
Center to center distance between loop and mounting hole: 0.781". Overall width: 0.500:
Material: steel, carbon with synthetic rubber mil grade Mil-R-3065.
Material thickness: 0.032".
Double marked MS21333-75.
Military NSN 5340-00-050-2740.
More info: www.umpco.com/products_pdf/NASM21333.pdf
Learn More - Umpco - MS-921333-71 - 5340-00-057-2904 - Hardware, Cable Clamp. 1/2" - 13/64".$0.98 As low as $0.49
Umpco - MS-921333-71 - 5340-00-057-2904 -Hardware, Cable Clamp. 1/2" - 13/64".
Cushioned Metal, Synthetic Rubber Jacketed.
Mount: 5.0mm hole.Diameter: 0.203"
Material Thickness: 0.032"
Center to Center Distance Between Loop and Mounting Hole: 0.656 inches nominal
Distance from Loop Center to Tongue End: 0.875 inches nominal
Loop Inside Diameter: 0.500 inches nominal
Note: Clamp is actually marked MS21333.
Military bags are double marked 5340-00-057-2904.
Applications: Commerical, Industrial, Engine Wiring Harness
- Electronic Hardware Corp - EHC - MS91528-3F2B - Hardware, Knob, with Arrow Dial, 1/4" ShaftSpecial Price $7.98 Regular Price $9.00Out of stock
Electronic Hardware Corp - EHC - MS91528-3F2B Hardware, knobs.
For 1/4" shaft with 2 set screws.
Skirted, Indicating.
Dimensions: 1.817" D x 0.870" high.
Color: Black Matte Finish.
Sturdy
P/N 125-3-2G.
Note: Military MS Series.
Learn More