Military Hardware
- UMPCO - MS21333-75 - NSN 5340-00-050-2740 - Cushioned Loop Clamp, 3/4" ID.
UMPCO - MS21333-75 - NSN 5340-00-050-2740 - Hardware, Cable Clamps.
Cushioned Loop Clamp, 3/4" to 11/64" ID.
Tongue Hole Type, Oil Resistant.
Distance from loop center to tongue end: 1.0".
Center to center distance between loop and mounting hole: 0.781".
Overall width: 0.500".
Material: Steel, carbon with synthetic rubber mil grade Mil-R-3065.
Material Thickness: 0.032".
Military NSN 5340-00-050-2740.
More info: http://www.umpco.com/products_pdf/NASM21333.pdf
Price for One Clamp, Discounted for quantity purchases of 6 & 60.
Learn More - Major - 103X4 - 5330-00-775-4955 - Packing retainer, Hardware, washer. With internal rubber grommet.$1.00READY TO SHIP - ONLY 40 LEFT IN STOCK!
Major - 103X4 - 5330-00-775-4955 - Packing retainer, An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the PACKING, PREFORMED or O-RING, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine PACKING MATERIAL. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis.
DLA500-92-A-A850-4641A/C
Hardware, washer. With internal rubber grommet. Steel. Dimensions: 0.602" OD, 0.30 ID. Note: 2B144.
Military NSN 5330-00-775-4955 alternates - 9905691, 990569-1, 5330-00-775-9990, 00-775-9990, 5330007759990, 007759990.
Learn More - UMPCO - 1919WDG11 - Cushioned loop clamp, 0.688" OD.Special Price $1.49 Regular Price $2.00
UMPCO - 1919WDG11 Hardware, cable clamps.
Cushioned loop clamp, 0.688" OD.
Inside loop ID: 0.673 - 0.703" max.
Tongue hole type, oil resistant.
Distance from loop center to tongue end: 1.032".
Center to center distance between loop and mounting hole: 0.799" min to 0.829' maximum.
Overall width: 0.490".
Material: steel, carbon with synthetic rubber mil grade Mil-R-3065.
Material thickness: 0.050".
Military NSN 5340-00-664-8163.
More info: http://www.umpco.com/products_pdf/AS21919.pdf
Learn More - UMPCO - 5340-00-057-2904 - Mil-R-3065 -Cushioned loop clamp, 1/2" ID.Special Price $1.29 Regular Price $1.89Out of stock
UMPCO - 5340-00-057-2904 - Mil-R-3065 - Hardware, cable clamps.
Cushioned loop clamp, 1/2" ID.
Tongue hole type, oil resistant.
Distance from loop center to tongue end: 0.875".
Center to center distance between loop and mounting hole: 0.656"
Overall width: 0.500".
Material: steel, carbon with synthetic rubber mil grade Mil-R-3065.
Material thickness: 0.032". Double marked MS21333-71.
Military NSN 5340-00-057-2904.
More info: http://www.umpco.com/products_pdf/NASM21333.pdf
Learn More - UMPCO - 5340-00-050-2740 - MS21333-75 -Cushioned loop clamp, 3/4" ID.Special Price $1.69 Regular Price $2.50
UMPCO - 5340-00-050-2740 Hardware, cable clamps.
Cushioned loop clamp, 3/4" ID. Tongue hole type, oil resistant.
Distance from loop center to tongue end: 1.0".
Center to center distance between loop and mounting hole: 0.781". Overall width: 0.500:
Material: steel, carbon with synthetic rubber mil grade Mil-R-3065.
Material thickness: 0.032".
Double marked MS21333-75.
Military NSN 5340-00-050-2740.
More info: www.umpco.com/products_pdf/NASM21333.pdf
Learn More - Umpco - MS-921333-71 - 5340-00-057-2904 - Hardware, Cable Clamp. 1/2" - 13/64".$0.98 As low as $0.49
Umpco - MS-921333-71 - 5340-00-057-2904 -Hardware, Cable Clamp. 1/2" - 13/64".
Cushioned Metal, Synthetic Rubber Jacketed.
Mount: 5.0mm hole.Diameter: 0.203"
Material Thickness: 0.032"
Center to Center Distance Between Loop and Mounting Hole: 0.656 inches nominal
Distance from Loop Center to Tongue End: 0.875 inches nominal
Loop Inside Diameter: 0.500 inches nominal
Note: Clamp is actually marked MS21333.
Military bags are double marked 5340-00-057-2904.
Applications: Commerical, Industrial, Engine Wiring Harness