Featured Products

8-Position DIP switch for: 1/7/14/31-day, degF or C, Wide or Narrow Range, Rh, Dew Point, Display & Keypad options - with Digital Readouts and adjustable setpoints/alarms. Battery Operated - uses Chart Nr C1601 (8" variety pack) Learn More

EECO - 1A212001G - 1A212001G219 Switch, Thumbwheel.

Actuator: 0-9 (10 position).

Connection: 12 dip.

Mech: PCB. Body: 19.6mm long x 20.1mm wide x 10.2mm high (With dial on right).

Note: Stripswitch.

Learn More

ELECTROSWITCH - 74203MM - Breaker Control Switch, Rotary, 3-Position, Trip (Momentary) - Normal (Center) - Close (Momentary)

Series 24, Red T-Handle

Gray Nameplate Legend "BREAKER CONTROL" and "TRIP" , "NORM",  "CLOSE".

Contact Ratings 20A / 500 VAC Continuous

20A / 125 VAC Interrupting.

Approximately 6" Long

Used, As Removed From Equipment

Made in USA

Learn More

EECO - 177608GN

Switch, rotary BCD.

Contacts: 8 Position.

Connection: Extended PC leads, six.

Mech: PCB . Panel hole: 0.515" wide x 1.211" high.

Note: Thumbwheel 0-7.

Learn More

EECO - 1A211034GF

Switch, Thumbwheel/StripSwitch.

Actuator: 0-9 and A-F.

Orientation: Counter Clockwise Rotation

Connection: 12 dip. Mech: PCB.

Body: 19.6mm long x 20.1mm wide x 10.1mm high (With dial on right).

Note: Stripswitch. Marked 1A211034GF Hall-Mark.

More info: http://www.eecoswitch.com/

New Old Stock - Rare

Learn More

Panel ind lamps 3V 15MA red lens cylin tubular 6.8mm in front of panel, 16.2mm behind panel, 5.2mm Bi-pin leads, Fits in 7.3mm hole Learn More

EMC - 4-017  IC SOX 40 PIN

Machined Pin

Gold Plated

40 DIP. Precision Machined Contacts

Spacing: 0.6" Row Spacing w 0.1" pin Spacing

Low Profile, Gold Pins and Contacts.

New Old Stock.

Made in Germany

Alternates: HWS2632

Learn More

Switch, thumbwheel. Actuator: 0-9 (10 position x 2). Connection: 12 Pin (inline contacts). Mech: PCB. Body: Overall 19.6mm long x 40.5mm wide x 10.9mm high. (With dial on right). Note: Stripswitch (2 Pieces joined). Learn More

EECO Switch - 124C8 - 188607 - 1 Digit Rotary Thumbwheel Switch

Status: Discontinued

0 Thru 9 BCD

I Digit, 10 Position

Contacts: 6 Pin PCB, Gold plated

Marked : 0, 1, 2, 3, 4, 5, 6, 7, 8, 9

Dimensions: Width: 0.47 in, Height: 1.4 in, Length: 1.2 in

New Old Stock

 

Learn More

IC SOX, 28 PIN GOLD Learn More

EMC - 4-449 - 28 Position, Gold Contacts IC Socket

Insulation Material: Polychrinated Thermaplastic

Temperature: -55 C to 125 C

Number of Contacts: 28

Number of Rows: 2

Current Rating: 3A

Pitch: 2.54 (0.100")

Alternates: TE Connectivity 2-1571586-9, 2-1571552-9

Machined Pins, 40/Manufactures Tray

New Old Stock

Learn More

Connector, IC socket. 24 Dip, solder tail, low profile. Color: green. Package of 17,one manufactures tube.

Learn More

ELECTRONIC CORPORATION AMERICA, ECA - NO. 8-591 

Solid State Low Leakage Relay 0-30MA,

0-120V, AC OR DC 

Note: For Use with Type 42MTB Photoswitch Terminal Bases

NSN: 5945-01-232-5447

Alternate: CA0509-005

New Old Stock

Proudly Made in USA

Learn More

EMC - 26422-51-517 - Connector, IC Socket.

Solder Tail

Pitch 2.54mm (0.100")

Row to Row Spacing: 7.62mm

22 Dip,

Low Profile.

Color: Green

Package of 10.

Learn More

ELECTRONICS CORP. OF AMER - 42MRL-5000 -  LED Source Photohead Sensor.

Status: Discontinued

Power Supply: Uses Type 42MTB base.

Switch Trans Beam

Output:Green Line, 25.4 mm - 171 m

(1 in - 560 ft) Sensing Distance

Response Time: 2.5mS

New Old Stock

Made in USA

Learn More

EDWARDS SIGNALING PRODUCTS - 349 Hardware, Enclosure.

The 349 is a weatherproof Mounting Box is perfect for mounting a variety of Edwards signaling appliances such as bells, horns and sirens. It is made from die-cast aluminum and finished at the factory with a baked sage gray enamel finish.

• Rugged Die-Cast aluminum

• Tapped for 3/4" (19 mm) conduit

• Molded neoprene gasket

• Corrosion resistant finish.

Back Mounting Box.

Construction: Rugged Die-Cast Aluminum 

For Edwards Signaling 340 6" or 10" Adaptahorns.

Color: Gray.

Size 6-1/2 Inch Diameter X 1-5/8 Inch Width

Applications: Fits 6”, & 10” 340, 435, 439D, 5520 Series Bells, Duotronic horn/siren

UL Listed for outdoor use.

More info: http://www.edwards-signals.com/index.cfm?pid=185

UPC: 782640242001

Alternate: Newark 92F6379

Learn More

Connector, power. 2P 30Amp 125VAC 3 Wire. Male travel trailer cap. Listed UL. Made in the USA. Learn More

Military Radio F Transformer 5-LeadsLockheed Martin 6096903-2, NSN 5950-005081882, W8766AOverall 0.639" dia round x 0.395" tall Learn More

Elmwood/Honeywell Sensors Inc - L115 3100-35-1 – 74/50 - Bi-Metal Thermal Cutouts with 12" Leads, NC, New. The 3100 Series consists of a single pole, single throw switch activated by a snap-action bimetal disc. Temperature calibrations are pre-set at the factory and each unit is 100% thermally and mechanically inspected. It is available to open or close on temperature rise. The case is laser welded to form a hermetically-sealed steel housing with a glass-to-metal seal at the terminal junction. It is manufactured and tested to meet or exceed critical commercial and industrial specifications. • Hermetically sealed • Tight tolerances • Tight differentials • Auto-Off • Electrical ISolation Contacts: Normally Closed (NC) SPST Contact Operation: Opens at 115 F Connections: Sealed wire 12” Long Voltage/Current Ratings: 30 VDC/VDA @ 7A, 120 VAC @6A, 240VAC @3A Mount: Screw Lange Precision Thermal Cutouts New 74/50 with 12" leads. Dimensions: Body Height 0.735” x 0.605” Diameter (18.67mm x 15.37mm) Applications: Computers, Medical electronics, Power supplies, Industrial controls, Test equipment, Infotech Approvals: UL, CSA New Old Stock Made in USA Learn More

ECC CORP. / Xerox - 0001217-00 - 05P264B - Triac Dimmer Control or Heater Speed Control

Voltgae / Current Ratings: 120 VAC /10Amp.

Xerox 105P264B.

Connections: 4 Wire Quick Connect.

Metal Enclosure

Approximate dimensions: 3" X 3" X 1 7/8" Minus Mounting Stud.

Made in USA - New Old Stock

Learn More

EIA - 701-216S - Relay, DC. Coil Voltage / Resistance / Current: 24VDC / 900 Ohm / 28mA. Electrical Configuration: SPST. Mech: PCB. Body: 0.975 x 0.7 x 0.8". Weight: 0.5 oz. Crossbar contacts. Removable Plastic cover. Alternate: R-A028, EIA 1077 (120-0001-000). Package of 10. Learn More

0-9 THUMBWHEEL SWITCH 9-pin BCD BM1-2-4-8/N side-stackable 1.8"hi x 0.5" wide 28"-behind panel including 9 long pins NEW IND PKG'D Learn More

Danaher Controls – Dynapar - HA62509000101 - Encoder 3/8 SHT FLG MT 5-26VDC SD MT- New Description The Series HA25 is a rugged and reliable encoder for industrial motion applications. The proven design can be the mainstay for any automation project. Mechanical / Electrical Attributes Shaft / Bore Size (mm): 9.525 Connection Location: Radial Disk Material: Glass Flange Material: Aluminum Maximum Operating Speed (RPM): 6000 Connection Type: Connector Termination: 7 Pin MS Connector Shaft Type: Shafted Shaft / Bore Material: Stainless Steel Resolution (PPR): 900 Line Driver Type: 7273 Output Signal: Open Collector w/ 2.2K Ohm Input Voltage: 5-26 VDC Incremental Signal Format: Format A: A Leads B CCW; Index Width (180°) Gated to B' Reverse Polarity Protection: Yes Duty Cycle: 45-55% Short Circuit Protection: Yes Maximum Frequency Response (KHz): 100 Incremental Signals: A Environmental Attributes: Hazardous Area Rating Certification {[None] Minimum Storage Temperature (°C): -40 Noise Immunity Testing Specification: EN61326-1 Hazardous Area Rating: {hazardous_area_rating_certification=[None] Shock Resistance: 50G Humidity Non-Condensing (%): 98 Minimum Operating Temperature (°C): 0 Vibration Resistance: 20G Housing Protection Level: IP66 Maximum Operating Temperature (°C): 70 Maximum Storage Temperature (°C): 90 ROTARY ENCODER 3/8 SHT FLG MT 5-26VDC SD MT DYNAPAR HA62509000101 / HA62509000101, Factory New, INCREMENTAL ENCODER, SHAFTED ENCODER, SERIES HA25, SIZE 25 ENCLOSED, WITH SHAFT SEAL, GLASS DISK, 0900 PPR, FLANGE MOUNT, 3/8" SHAFT, 7 PIN MS CONNECTOR OR CABLE, SINGLE END, W INDEX, 5-26V IN, 5-26V OC W 2.2 KOHM PULLUP OUT, SIDE MOUNT CONNECTOR Made in USA Learn More

DC/DC 5V-In 28V@25MA Out -=- CONVERTER MODULE Learn More