Featured Products

Danaher Controls – Dynapar - HA62509000101 - Encoder 3/8 SHT FLG MT 5-26VDC SD MT- New Description The Series HA25 is a rugged and reliable encoder for industrial motion applications. The proven design can be the mainstay for any automation project. Mechanical / Electrical Attributes Shaft / Bore Size (mm): 9.525 Connection Location: Radial Disk Material: Glass Flange Material: Aluminum Maximum Operating Speed (RPM): 6000 Connection Type: Connector Termination: 7 Pin MS Connector Shaft Type: Shafted Shaft / Bore Material: Stainless Steel Resolution (PPR): 900 Line Driver Type: 7273 Output Signal: Open Collector w/ 2.2K Ohm Input Voltage: 5-26 VDC Incremental Signal Format: Format A: A Leads B CCW; Index Width (180°) Gated to B' Reverse Polarity Protection: Yes Duty Cycle: 45-55% Short Circuit Protection: Yes Maximum Frequency Response (KHz): 100 Incremental Signals: A Environmental Attributes: Hazardous Area Rating Certification {[None] Minimum Storage Temperature (°C): -40 Noise Immunity Testing Specification: EN61326-1 Hazardous Area Rating: {hazardous_area_rating_certification=[None] Shock Resistance: 50G Humidity Non-Condensing (%): 98 Minimum Operating Temperature (°C): 0 Vibration Resistance: 20G Housing Protection Level: IP66 Maximum Operating Temperature (°C): 70 Maximum Storage Temperature (°C): 90 ROTARY ENCODER 3/8 SHT FLG MT 5-26VDC SD MT DYNAPAR HA62509000101 / HA62509000101, Factory New, INCREMENTAL ENCODER, SHAFTED ENCODER, SERIES HA25, SIZE 25 ENCLOSED, WITH SHAFT SEAL, GLASS DISK, 0900 PPR, FLANGE MOUNT, 3/8" SHAFT, 7 PIN MS CONNECTOR OR CABLE, SINGLE END, W INDEX, 5-26V IN, 5-26V OC W 2.2 KOHM PULLUP OUT, SIDE MOUNT CONNECTOR Made in USA Learn More

DC/DC 5V-In 28V@25MA Out -=- CONVERTER MODULE Learn More

Crystal oscillators. 42.9MHZ. Package: 4 Dip can, in a 14 Dip dual inline pkg. Learn More

13-Position connector with tri-band pins (M) with the tiny INSERTER included at No additional charge Learn More

New Military Voltage regulators 28V NEG-GROUND in box 7" X 6" X 3-1/2" Learn More

Current amplifier. Isolated current input. Input: 0mA to 20mA. Output: 0V to +5V (5VDC 30mA maximum). Package: 14 Pin module. Learn More

DELL - PA-6 - PA-6 - 9364U  - Power Supply Adapter.

Model: ADP-70EB

For Dell Laptop Computers.

Input: 100 to 240 VAC, 50-60Hz, 1.5A, 70 Watt Continuous

Output: 20VDC 3.5Amp.

Dimensions: 7.4" x 4.9" x 1.8"

3 Prong Cord Included

Genuine Dell OEM

Compatible with Dell Inspiron 2500, 2600, 2650,3700, 3800, 5000 7500 8000 8100, AA20031, Latitude C400, C500, C510, C600,

Learn More

DELL - PA-2 - 85391 - Laptop Power Supply Adapter with Power Cord

LAPTOP Power Supply Adapter for Dell CP, C, Inspiron and Latitude Series Laptops 

Docking Stations: C/Dock, C/Dock II, C/Port, C/Port II 

Input Voltage: 100-240 vac 50/60Hz.

Output Voltage: 20VDC 3.5Amps, 70W

Compatible P/Ns: 9364U, 4983D, 7E109, OR334, 79215, 85391, 81407, 310-3432, 310-4615, 310-7500, PA-1, PA-2, PA-6, PA-8.

Excellent Condiction - Used / Removed From Equipment 

Learn More

DELL - OHD058 D-Series Docking Station / Monitor Stand.

Maximize your desktop or other workspace, while adding convenience to your work area with the Dell D-Family Monitor Stand! For use with the D/Dock and D/Port (not included), the D-Family Monitor stand gives customers a compact, space-saving design with customizable D/Port docking positions.

On and Off switch for Dell Latitude D-series/Inspiron 600M notebooks. (in manuf box).

Two easy access buttons (with status indicator LED lights) for power and undocking convenience.

Activity lights for the system hard drive and eject status are also provided.

The modern, open side design allows for convenient access to media bays and other frequently used ports on your notebook.

Attractive and extremely Sturdy stand can support 100 pounds. 

Use the monitor stand to simplify connectivity to various devices such as printers, keyboards, mice and other D-Family media accessories.

Dimensions: 14.5" X 13.5" X 5.5"

Shipping Package Dimensions: 16 1/2" x 19 1/2" x 8" @ 11 lbs

Exceeds standard shipping limit of 5 lbs, Actual shipping cost is dependent upon end location. 

Note: This is the Stand ONLY - Does not Include Port Replicator.

Incluse Set-up Guide

Compatability: Dell Latitude 100L, 110L, 120L, 131L, C400, C500, C510, C540, C610, C640, C810, C840, D400, D410, D420, 430, D500, D520, D531, D600, D610, D620, D630, D631, D800, D810, D820, D830, X1, X200, X300 and Vostro 1310, 1510, 1710 laptops.

Learn More

Computer Products. Power supply. +5V-40A +3.3V-30A (250W max) +12V-12A -5V-0.3A -12V-0.5A +5VS-0.3A. Input: 100-120V 8A or 200-240V 50/60Hz 4Amp. With many-wire harnesses & as many as 18-molex connectors (may includes extensions). Guaranteed not DOA. 5.9" x 5.6" x 3.5" Learn More

3.3VDC and 5VDC AT 15Amps 75Watts Max - +/-10% via TRM terminal & external resistor - 36-76VDC Input - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More

3.3V (+/-10% via TRM terminal & external resistor) 23.4Amps Output - 36-76VDC Input - Line & Load Regulation: 0.2% - OverVoltage Protection - OverCurrent Protection - Remote Sensing - Remote On / Off control - Thermal Protection. Only 58 x 61 x 17mm high including terminals. Learn More

Meter, SPDT relay. Hermetically sealed - ruggedized ''DO NOT OPEN''. Meter face: 2". High and low set points adjustable from front of meter. Appears to be very sensitive but we don't know the actual rating. Scale reads -25 - 0 - +25 Percent of +18V. Single hole mount, for 2.211" D hole. Three holes for mounting all with 2.083" centers. Contacts: 5 solder hooks. Note: Marked: ITTFL-4566028-04. Learn More

Active Terminator Serial Bus Connectors Learn More

Double Marked as 6090269-19G Stragight Shape w/jackscrew, Humidity Resistant and Moisture Resistant and Shock Proof, Thread Class 2A, FemaleCONN ASSEMBLY 75048-328P-090 28-POS (F) LOCKHEED P/N 6090269-1, CAGE 03640 Learn More

ROTARY ACTUATOR 15-120 DEGREES IN 15DEG INCREMENTS 0.867"[22mm] SQUARE SHAFT. 82M-7R63 Series General Info: Drive:Right - Ports:1/4 NPT - Pounds:10 [ kg:4.6 ] - Clamping Force:3680 In-Lbs [420nM] - Inductive sensing module with LED display - DE-STA-CO Modell Nr 8PW-082-1 Learn More

Programmable Delay Line. Package: 24 Dip. New. With specification sheet. Learn More

Resistor, ceramic. Resistance: 0.72 Ohm. Power: 140 watt. Tolerance: 10%. Ribbed. Technology: wirewound. Black high temperature silicon coated. Dimensions: 1.144" D x 4" long. Radial lug. Note: Edgewound. Alt P/N: RWR140W0.72 Ohm. More info: http://www.datasheetcatalog.org/datasheet/vishay/hlz.pdf Learn More

DEFOND - DMA1211- 9-01 Switch, Micro, Lever, Snap Action.

Series 1211

Contacts: SPDT. NO & NC Contacts.

Ratings: 11Amp 125VAC, 6Amp 250VAC, 0.5Amp 125VDC.

Actuator: Lever, extending 11.2mm from main body of switch.

Connection:  3.16" Male Quick Connect Terminals.

Switch Circuit: Momentary, 2 Position

Mech: PCB or Panel Mount.

Panel hole: Body 28.0mm long x 9.7mm wide x 15.9mm high. (W: 0.39" X H 0.91" X 1.92")

Has 2 hole mount at 24.5mm centers.

New Old Stock 

Learn More

Detroit Controls - CBPD-4-5SP - 3-581 - Switch, Micro, Sensitive Lever Assembly.

Contacts: SPDT.

Contact Ratings: 10Amp 125/250VAC (1/3HP 120-250VAC).

Connection: Male 1/4" Quick Connect Terminals, or Solder.

Mechanical: Panel, Assembly on a Bracket with a Plastic Guide.

New Old Stock - Never Used Overstock Assembly

Note: May have been designed for use on a coin changer.

Note: Sturdy Bracket can be used to detect parts or Switch can be removed 

Approvals: UL, CSA

Learn More

Transformer, audio. Datatronics/David Systems 124-100680-0001. Semi-shielded transformer or pot core, 5-terminals. Dimensions: 0.685" D x 0.5" above board. Note: No other info available. Nicely made.

Learn More

Data Cartridge. 600 Feet. Stock No C1886 (DC600A Compatible). Learn More

Dialco/Dialight - 162-8430-09-502 - Lamp socket for T1-3/4 bulbs.

Military-style, caps not included. See attached Data Sheet for various Caps (Stovepipe, Cylindrical, Flat, Convex, & faceted) that fit this base. 

Series:162, 178 Series

Description: Sub Miniature Panel Indicator

Lamp Type: Incandescent. Midget Flange

Terminal Lamp Type: MID. Flange Base

Terminal Type: Solder

Terminal Other: Two Terminals, Fully insulated

Mounting Hole Size: 15/32" Clearance Hole

Mounting Bushing: Aluminum

Metal Finish Desc: Black Anodized Finish

Mounting Hardware Description: Steel lock washer and hex nut.

For 1.35 to 28V lamps, midget flange, front panel mounting. 

Moisture Sensitivity Level (MSL): 1 (Unlimited)

Compliance: MIL-L-3661B

Used/Removed from equipment, connection previously soldered.

Note: No Cap or bulb.

Learn More

LED. Light Bar. Mount: PCB - Flush. Package: 12 Dip. Color: Green. Dimensions: 3/4" x 5/8". Learn More