Featured Products

SKAN-A-MATIC - T21003 - Photoelectric Module.

Mount: PCB.

Package: Module, 6 pin.

Dimensions: 1" square x 0.50" high.

Made in UK

Learn More

SKAN-A-MATIC - T20126 - SCANNER CONTROL MODULE

Learn More

Transistor, N-Channel FET. Voltage: 30V. Current: 10mA. Dissipation: 200mW. Package: TO-92 plastic. Note: Silicon. Military NSN 5961-01-015-9884. Fluke P/N: J2168 and or 386730. Learn More

Transistor, N-Channel FET. Voltage: 30V. Current: 10mA. Dissipation: 200mW. Package: TO-92 plastic. Note: Silicon. Military NSN 5961-01-015-9884. Fluke P/N: J2168 and or 386730. Learn More

SIGMA INSTRUMENTS- 4585 - Relay, Power,

Contacts: SPDT.

Coil Resistance: 5000 Ohm.

Connections: 5 Pin Base.

Packaging: Aluminum Enclosure.

New Old Stock

NSN 5945-00-643-6809

Learn More

Transistor, N Channel FET. Max voltage: 30V breakdown. 2V threshold. Max current: 10mA current saturation. Package: TO-72 gold. P/N: SD210. Note: Input capacitance 3.5pF. Leads may have a bit of residual foam that deteriorated and was removed. Learn More

IC, PWM. Regulating pulse width modulator. Package: 18 Cdip. Note: Military 883B. Learn More

Relay, control, DC. Contacts: SPDT. Contact Ratings: 1VDC, Pulls in about 0.2VDC. Coil Resistance: 3.5 Ohm. Packaging: Hermetically sealed. Size: 1.5" x 1.5" x 3" tall. Note: PAT#2425092. Learn More

QUAD BISTABLE LATCH C.O. Learn More

SIEMENS - PMB2905V3.3 IC.

GSM Analog Interfacing Module (GAIM) PMB.

Package: P-TQFP-64-1 (SMD).

Made in Germany

Learn More

9VDC Tiny Lil 6-Dip PCB mt. Learn More

Pulled from socket of exotic electronic test equipment. 16-pins and one threaded stud. 29.3mm x 18.2mm x 36.2mm tall. Solder terminals or plug into 16-pin socket. Single 700-Ohm coil. Sealed silver can. Learn More

Contact Box with Magnetic Base - AnschluBdose mit Magnathalter - Rubber coated Strong magnet 2.6" / 3mm diameter x 1.8" tall. original part number obscured, 2'd charater "W" may be wrong - with four screws. Sealed package before picture was taken. Learn More

Diode, zener. 6.2V 400mW. Silicon. Temperature compensated 0.001%. Case: DO-204AH axial. TEMPERATURECOMPENSATED SILICON ZENER REFERENCE DIODES 6.2 V, 400 mW Learn More

Phototransistor, NPN, 860nm. Voltage: 35Vce. Current: 15mA. Dissipation: 165mW. Clear. Package: 3mm LED plastic, 2-Pin T-1. Operating temperature: -40 to 100 Deg C. Note: Silicon. Application: 380nm to 1150nm. Infineon/Siemens. Package of 10. Learn More

Siemens - BF255 Transistor, NPN.

Max voltage: 20VCEO, 30VCES.

Max current: 30mA.

Dissipation: 250mW.

Package: TO-92.

Storage temperature: -65 to 150 Deg C.

Application: RF. For AM and FM stages.

Note: Silicon.

Learn More

Extender Board. Learn More

SERVO - 77454 1063-1 Motors, AC.

Input Power: 115/200VAC 60HZ

Spped: 1300RPM

Power: 12 watt.

Torque: 1.1 Oz In.

Splined shaft.

Capacitor 0.8uF required, not included.

Learn More

SHINANO KENSHI - STH-39D249 - 6 Wire Stepper Motor.

Status: Discontinued

Dimensions: 39mm Square x 37mmD.

NEMA Size 14

4.7mm Flatted Shaft 24mmL.

1.8 Degree per Step

7.1-Ohm Coils

6-long Wires.

New

Made in Japan

Learn More

Sanyo - LA3370 - IC, Audio PLL FM Multiplex Stereo Demodulator, 16P ZIP The Sanyo LA3370 ICs, which are audio PLL FM multiplex stereo demodulators with 16 pins. These through-hole mounted units are made of plastic and come in bulk packaging. They feature high-cut control (HCC) and stereo noise control (SNC) capabilities, providing analog output. Ideal for electronic components and semiconductors, these ICs are designed for industrial use and offer a reliable interface for audio PLL FM multiplex stereo demodulation. Genuine Sanyo IC The LA3370 is a multiplex IC for FM car stereo, and it has the following 2 functions through its utilization of the IF meter output voltage, etc. 1. Stereo noise control (SNC) under which the noise particular to the FM stereo unit in the weak electric field is reduced smoothly. 2. High-cut control (HCC) under which the high frequency is smoothly attenuated. In addition, the LA3370 can be, due to its low distortion factor, an IC for multiplex stereo demodulator which is appropriate for the car component stereo unit. Features • Low distortion factor. (0.05% typ. 300mV input, mono) • The ripple of power source can effectively be rejected. (35dB typ.) • The range of voltage to be used is wide. (VCC=6.5 to 14V) • The space factor is advantageous because of the single-end package. • The printed circuit board can easily be prepared as 3mm pitch is used between the pins. Case: 16 Sip, Staggered Leads. Genuine Sanyo – No Counterfeit – No China – No Delays – No Disappointments New Old Stock Alternate: ECG1461, NTE1461. Learn More

SANKEN - SNRD39K1 MOV, Metal Oxide Varistor.

Applied voltage continuous: 25VAC, 31VDC.

Varistor voltage: 39V.

Joules: 1.5.

Clamping voltage: 79V.

Capacitance: 700pF.

Package: Radial leads, 8mm.

Alternates: 7D39K, D732Z0V250RA02, ERZ05DK390, S07K25

Package of 10.

Learn More

SCR module. Dual 80A 1,600V. Three screw terminals, four gate connections. Size: 0.80" x 3.67"L x 1.2"H. No screws. Weight: 0.2 lbs Learn More

SICK OPTIC ELECTRONIC - WT12-N1351 – 1012463 - Sensor, Photoelectric. New The W12 photoelectric sensors offer reliable object detection in demanding industrial environments and are virtually universal in use. The rugged zinc die cast housing protects against mechanical and thermal influences. At the same time, the photoelectric sensors are resistant to optical interference such as ambient light. Thanks to laser, LED and infrared technology, the sensors are versatile in use. The local BluePilot user interface with teach-turn adjustment and IO-Link enable fast and intuitive commissioning. Application-focused variants ensure a high detection reliability – even for transparent, uneven, reflective, high-contrast, perforating or depolarizing objects. Thanks to multifunctional variants, the photoelectric sensors are flexible in use and can be adapted to individual requirements. The SICK WT12-N1351 (part number 1012463) is a photoelectric proximity sensor from the W12 series, designed for industrial automation and object detection. Status: Discontinued Technical Specifications • Operating Principle: Photoelectric proximity sensor with background suppression. • Supply Voltage: 10 V DC to 30 V DC. • Switching Output: NPN switching output with a maximum current of 100mA. • Sensing Range: Typically up to 250 mm (based on similar W12 models like the WT12-2P130). • Housing: Metal, zinc die-cast with an IP67 enclosure rating. • Dimensions: Approximately 15 mm x 49 mm x 41.5 mm. • Connection: Usually features a cable or M12 plug depending on the sub-variant (N1351 typically denotes a specific cable/plug configuration). • Output Type: NPN switching output with a maximum current of 100mA. • Replacement Information: It is a direct replacement for the WT 12-2N830 (part number 1016123). • Modern Equivalent: For new installations, SICK often recommends the WTB12-3 series. • Weight: Approximately 1.36 kgs (boxed/shipping weight). • Housing: Typically features a rugged metal die-cast zinc housing designed for durability in harsh environments. General Series Features (W12) While specific sensing ranges for the N1351 variant can vary based on the target object, the W12 family generally offers: • Robustness: IP67 and often IP69K ratings, making them resistant to aggressive chemicals, high-pressure cleaning, and extreme temperatures. • Detection Technology: Many models in this series utilize background suppression to reliably detect objects while ignoring background interference. • Common Applications: Used in automated production lines for presence checking, quality control, and material handling in logistics. Factory New Learn More

Thyristor module. 800VRRM, 900VRSM. 50Amp ITRMS, 26Amp ITAV. Package: module. Used/Removed from equipment. No hardware. Learn More