Featured Products

Connectors, coax. SMA 75 Ohm plug. Gold-plated and teflon. 40/100/21 Basic socket Style 43/3B. Learn More

Diode. 100Amp IFAV, 200Amp IFRMS 1200V. Package: DO-205 stud, Used/Removed from equipment. Note: Silicon. Anode to stud. Learn More

Integrated BTSC stereo encoder module. Learn More

Diodes. Fast recovery 200V, Io = 2.0 A. Case: axial leads. Learn More

Relay. AC. Contactor: 24VAC. Coil: 250VAC 5A. Connection: plug-in, octal. Electrical conf: 11 pin. Made in Austria. Learn More

New TO-99/12 Gold leads. Learn More

Shindengen Electric - S1ZB80-4101 Diode. FWB, Full Wave Bridge.

Status: Discontinued

Type: Encapsulated Single Phase Bridge            

If - Forward Current: 800 mA      

Peak Reverse Voltage: 800 V      

Vf - Forward Voltage: 1.05 V       

Max Surge Current: 30 A              

Operating Temperature: - 40 C to + 150 C             

Ir - Reverse Current: 10 uA          

Product Type: Bridge Rectifiers

Rectifiers VRM=800 800mA.

Case: 4 Dip, 0.1'' x 0.2'' spacing.

More info: www.shindengen.co.jp/product_e/semi/list_detail.php?code=01&id=84

Made in Japan

Marked Z8 14

GE # LL0893

Note: Highly Discounted when purchasing manufacturers full tube of 100.

Learn More

Transducer. Bonded foil strain gage. Range: 500 KPAA. Output: 4-20mA. Supply: 15-50VDC. Outdoor and hazardous locations, Class I, II and III. Bonded Foil Strain Gage, two wire and ground. Resolution: Infinite. Temperature, Operating: 0� F to 180� F. Temperature, Compensated: 60� F to 160� F. Size: 2.26"D x 5.8"L, 7.7"L with cable strain relief. Weight: 2 lbs before packing. Learn More

Selector auto step unit. Rear connectors: Inlet, Outlet, Machine I/O, Out and Gage Head. Has various LED displays on front of box. With a few attached cables: Inlet, Out and I/O. Learn More

SCHAFFNER - FN406-0.5-02 - Filters, Line.

125/250 VAC 50-60 Hz. 0.5A@40DegC / -25 + 85DegC.

Inductance, 24mH.

Mount PCB 5 pin Ultra Compact.

Filter Type: PCB Filter    

Voltage Rating: 250 VAC              

Current Rating: 500 mA

Mounting Style: Through Hole    

Termination Style: Solder Pin     

Leakage Current: 190 uA              

Approvals: UL, CSA, IEC/EN         

Operating Frequency: 0 Hz to 400 Hz      

Unit Weight: 1.269863 oz

 

Learn More

Terminal strip, surface mount. Straight, two rows of five, 10-position. 0.32"L. 0.10 x 0.10"centers. Gold-plated 0.025"square pins. 46/tube Learn More

SICK OPTIC ELECTRONIC - WT12-N1421 – Photoelectric Proximity Switch, New The SICK WT12-N1421 (Part No. 1010807) is a photoelectric proximity sensor designed for non-contact object detection. As part of the SICK W12 series, it features a rugged metal housing suitable for demanding industrial environments. Core Specifications • Sensing Range: Adjustable from 35 mm to 100 mm. • Output Type: NPN digital output. • Supply Voltage: 10 V DC to 30 V DC. • Output Current: Maximum of 100 mA. • Connection: Pre-wired with a 4-wire cable, typically 1.5 to 2 meters in length. • Adjustment: Features a manual potentiometer for fine-tuning the sensing distance. Physical & Environmental • Housing Material: Durable zinc die-cast metal. • Dimensions: Approximately 15 mm x 49 mm x 41.5 mm (standard W12 rectangular form factor). • Protection Rating: Often rated up to IP69K, providing high resistance to water and dust. • Operating Temperature: Reliable performance from –40 °C to +60 °C. This sensor is commonly used in packaging, automotive, and logistics applications due to its ability to handle optical interference and harsh physical conditions. Factory New Learn More

SICK OPTIC ELECTRONIC - WT2000-B5320 - Photoelectric sensor. Energetic proximity sensor. New Functional principle Photoelectric retro-reflective sensor Housing design (light emission) Rectangular Sensing range max.: 0 m ... 15 m 1) Sensing range: 0 m ... 15 m 1) Focus Approx.: 1.3° Type of light: Visible red light Light source: LED 2) Light spot size (distance): Ø 320 mm (14 m) Angle of dispersion: Approx. 1.3° Wave length: 660 nm Adjustment Potentiometer Supply voltage: 10 V DC ... 30 V DC 1) Ripple : 5 V 2) Current consumption: 80 mA 3) Switching output: PNP /NPN Output function: Complementary Switching mode: Light/dark switching Switching mode: selector Selectable via light/dark selector Signal voltage: PNP HIGH/LOW Approx. VS – 2.0 V / 0 V Output current: Imax. ≤ 100 mA Response time: ≤ 1 ms 4) Switching frequency: 500 Hz 5) Time functions Off delay: 6) On delay 7) Delay time ≤ 0 ms,≤ 5 ms, ≤ 10 ms, ≤ 20 ms, ≤ 50 ms Connection type Male connector M12, 5-pin Circuit protection A 8) C 9) D 10) Protection class II : 11) Weight: 150 g Polarisation filter ✔ Alarm output: PNP Housing material Plastic, Glassfibre reinforced plastic Enclosure rating: IP67 Ambient operating temperature: –25 °C ... +40 °C Ambient temperature, storage: –40 °C ... +70 °C Dimensions: (W x H x D) 45 mm x 73.7 mm x 48.6 mm Photoelectric sensor. Energetic proximity sensor. Double marked 7023049. DC 10...30V. Out: 100mA. Complete with manufactures specification sheet. Learn More

SICK OPTIC ELECTRONIC - WT12-P4471 – 1011058 - Photoelectric Proximity Switch, New. The SICK WT12-P4471 (Part No. 1011058) is a discontinued photoelectric proximity sensor. It is specifically designed as a proximity switch with foreground blanking, allowing it to detect objects within a set range while ignoring those closer to the sensor. Status: Discontinued Key Specifications • Functional Principle: Photoelectric proximity sensor with foreground blanking. • Sensing Range: Up to 100mm. • Output Type: PNP. • Switching Mode: Light/dark switching. • Supply Voltage: 10V DC to 30V DC. • Current Rating: 100 mA maximum. • Connection Type: Male connector M12, 4-pin. • Enclosure Rating: IP67 (dust-tight and protected against water immersion). Additional Information: https://www.sick.com/media/productoverview/5/65/765/productoverview_W12_g555765_en.pdf Factory New Learn More

SICK OPTIC ELECTRONIC - WT12-N1421 – Photoelectric Proximity Switch, New The SICK WT12-N1421 (Part No. 1010807) is a photoelectric proximity sensor designed for non-contact object detection. As part of the SICK W12 series, it features a rugged metal housing suitable for demanding industrial environments. Core Specifications • Sensing Range: Adjustable from 35 mm to 100 mm. • Output Type: NPN digital output. • Supply Voltage: 10 V DC to 30 V DC. • Output Current: Maximum of 100 mA. • Connection: Pre-wired with a 4-wire cable, typically 1.5 to 2 meters in length. • Adjustment: Features a manual potentiometer for fine-tuning the sensing distance. Physical & Environmental • Housing Material: Durable zinc die-cast metal. • Dimensions: Approximately 15 mm x 49 mm x 41.5 mm (standard W12 rectangular form factor). • Protection Rating: Often rated up to IP69K, providing high resistance to water and dust. • Operating Temperature: Reliable performance from –40 °C to +60 °C. This sensor is commonly used in packaging, automotive, and logistics applications due to its ability to handle optical interference and harsh physical conditions. Factory New Learn More

SICK OPTIC ELECTRONIC - LUT3-920 - Luminescence Sensor 12-30VDC 100mA out. Sensing Distance: 20mm Wave Length: 375 NM Receiving Range: 450-750 NM Switching Frequency: 1.5 kHX Double marked 1019286. Housing Material: Die-Cast Zinc. Connection Type: Connector M12, 5-pin. UV-LED. Complete with manufactures operating instructions. Made in Germany Factory New Learn More

SICK OPTIC ELECTRONIC - CS1-P3611 – Colour Sensor. Status: Discontinued Q=PNP, Output 12-30VDC 100mA out. 60mm Sensing Distance 5 Pin, M12 Connector Double marked 1012859. Housing Material: die-cast zinc. Connection Type: Connector M12, 5-pin. UV-LED. Complete with manufacturers operating instructions. Made in Germany Factory New Learn More

SEOUL SEMICONDUCTOR - AW2200 - LED. AC Cool.

Status: Discontinued

Series: Acriche A2.

High Bright.

Color: White, Cool.

Forward Voltage: 85.6 to 92VAC, 75mA.

Current, test: 20mA (1.7W).

Luminous Flux @ Current test: 80lm.

Current max: 20mA (1.7W).

Lumens @ Current max: 80lm.

Lumens/Watt @ Current - Test: 47lm/W.

Wavelength: 6300K.

Lens: round 5.6mm.

Viewing angle: 110 Deg.

Mount: SMD. P

ackage: 8.00mm D x 5.55mm high.

Lead free.

Rohs compliant.

Learn More

SEC Samsung Electronics - IRF540 - Transistor, N Channel MOSFET. 100V, 28A, 85W, TO-220

The IRF540N is an N-Channel Mosfet. This mosfet can drive loads upto 23A and can support peak current upto 110A. It also has a threshold voltage of 4V, which means it can easily driven by low voltages like 5V. Hence it is mostly used with Arduino and other microcontrollers for logic switching. Speed control of motors and Light dimmers are also possible with this Mosfet since it has good switching characteristics.

Status: Discontinued

Max voltage: 100V.

Max current: 28Amp.

Dissipation: 85 watt.

Package: TO-220.

Operating temperature: -55 to 175 Deg C.

Note: Low gate charge StripFet.

RDS on: 0.55 Ohm.

Alternates: RFP30N06, IRFZ44, 2N3055, IRF3205

Learn More

Voltage regulator. For TV's 115V 40 watt. Package: 5 leads, with 5th pin (right) cut. New. Note: Cross NTE15018. Learn More

SEAGATE TECHNOLOGIES - 10506-016 Connectors, IC socket.

Machined 16 pin break-a-way leads.

Chip Carrier / Aluminum Carrier.

Maybe replaced with exact replacement by Augat 716AG12D.

Package of 10.

Learn More

Hardware, cover plates. For electrical outlets, duplex. Color: white. Listed: UL. Made in the USA. Package of 3. Learn More

Bearings, OD: 17.4mm round x 6.3mm tall , ID: 6.2mm Factory new ind pkg'd. Learn More

SANKEN Marcon - TNR15G560KM -  MOV, Metal Oxide Varistor.

High Performance TNR G (M) Series

Applied Voltage Continuous: 35VAC, 45VDC.

Varistor Voltage: 56V.

Joules: 10.

Clamping voltage: 103V, 10A.

Capacitance: 5,600pF.

Package: Radial Leads, 14mm.

Mount Type: Through Hole Mount Disk Package

Alternate: GE V56ZA8, Littelfuse V56ZA8P, Multicomp MCV560K14DS

Package of 10.

 

Learn More