Featured Products

Connectors, D-Sub. DB37 female. Series: HDP-20. Body material: steel. Shell size: DC. Rohs compliant. Learn More

CURRENT SENSOR Learn More

SPACER HARDWARE KIT Slidelock Leaded Process Compatible:No Peak Reflow Compatible (260 C):No Learn More

Plastic Connector Backshell Body Material:Thermoplastic Connector Shell Size:2 Leaded Process Compatible:No Peak Reflow Compatible (260 C):NoRoHS Compliant:No Connector Type:Cable Clamp For Use With:HDP-20 HDE-20 Connectors Learn More

AMP INC - 745583-1 - 5745583-1 - Sub D Connector Hardware

Fasteners Screws Leaded Process

Material:Steel

Peak Reflow Compatible (260 C)

Thread Size:2-56

Length: 43.81 mm

For Use With:D-Sub Connector

Learn More

TE Connectivity AMP INC - 206478-3 - Connector, D-Sub.

Cable Clamp Kit, Thermoplastic.

Amplimite, Size 3.

Number Pins: 25

Dimensions: Height 15.7 mm, Length 41 mm, Width 41.3 mm

Wire/Cable Diameter: 10.67 mm

For Use With:HDP-20, HDE-20.

Learn More

5V NEW EPOXY MOLDED 4-PIN DIP RELAY IN A 16PIN PKGCONTACT FORM 1B 500-OHMManuf spec's can be found on Manuf website Learn More

DB25 (F) D-Subminiature Connector , Number of Contacts:25 .Body Material:Steel , Contact Termination:Crimp New Learn More

Connector, socket. Housing gender: receptacle. Contact gender: female. Circuit count: 20 Position (10 x 2). Mounting type: PCB. Note: 0.100 inch AMPMODU receptacles. 20 MODII VRT DR CE 100/115. Learn More

TE Connectivity AMP INC - 69710E - Premium Crimp Tool.

Anyone can make a tool to crimp terminals onto a wire. But not everyone can manufacture a tool to
crimp the terminals properly. Crimp termination of wires isn’t easy. At least, doing it right isn’t easy. We
know. We started it. TE Connectivity developed the technology of hand crimping over 70 years ago.

The 69710-1 is a C-Head Straight Action Hand Tool. The tool consists of a head with a stationary die holder and moving die holder and handles with a ratchet. This tool is a member of the CERTI--CRIMP* hand crimping tool family. The ratchet on this tool ensures full crimping of the product. Once engaged, the ratchet will not release until the handles have been fully closed. The interchangeable die sets close in a straight line to minimize contact or terminal rotation during crimping. When applicable, user-assist features such as a contact or terminal locator and a wire stops are built into the die set.

Straight Action "C" Head.

Ratcheting. Mod D for Termashield Ferrules.

Learn More

AMP/TYCO ELECTRONICS - 5-179010-1 – Board to Board Connector, 0.8mm FH Receptacle 40Pin The product is AMP/TYCO ELECTRONICS 5-179010-1 board-to-board connectors with a 0.8mm foot print. These surface-mount connectors have a 40-pin design and are white in color. Made of high-temperature thermal plastic and gold-plated beryllium copper, these connectors are suitable for surface mounting and have 2 poles. With origins in Singapore, these connectors are reliable and durable for various electronics and industrial applications. Tyco Electronics 0.8mm FH surface-mount connectors are designed for parallel board stacking applications using subminiature connectors to meet today’s electronic industry requirements for high density packaging. Board To Board Stacking Connector. Connector Type: Stacking. Series: FH. Pitch Spacing: 0.8mm. (0.031”) No. of Contacts:40. Gender: Receptacle. Contact Plating: Gold. No. of Rows:2. Contact Termination: Surface Mount Voltage Rating: 100 VAC Current Rating: 0.5 ampere Contact Resistance: 30 milliohms max. (initial) Dielectric Withstanding Voltage: 500 VAC (1 minute) Operating Temperature: -40°C to +85°C (Including terminal temperature rise) Direct Alternate: 5-5179010-1. Vertical. 0.8 FH REC Assy 40P H=13 B=0.5 Additional Information: https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=889092_0.8mm_FH_Conn&DocType=Catalog%20Section&DocLang=English&DocFormat=pdf&PartCntxt=5-5179010-1 Learn More

TE Connectivity AMP INC - 205718-1 Connector, Hoods.

DSUB/DB25 Amplimite.

Material: Thermoplastic.

Cable clamp size 3.

Mount: Cable

Number of Positions: 25

Shielding: Unshielded

Wire/Cable Type: Round

Dimensions: Depth 41.28 mm, Height 16.26 mm, Length 41.02 mm

Wire/Cable Diameter: 10.67 mm

Flammability Rating: UL94 V-0

Color: black. Rohs compliant.

Alternates: 571-2057181, 5205718-1

Learn More

Connector, header. Wire to board 7 Position, 2.54mm (0.100"). One row. Mount: PCB. Learn More

Connector, header. Wire to board 6 Position. Learn More

TE Connectivity AMP INC - 3-435640-3 Switch, DIP.

Status: Disconitnued

SPST 2 Position sealed rocker.

Series 7100.

Top actuated.

Mount: 4 Dip PCB.

Learn More

Connector, solderless terminal. Male 13Amp 250V. Wire size: 24-18AWG. Electrical crimp contacts. Contact material: brass. Contact plating: tin. Rohs compliant. Package of 50. Learn More

TE Connectivity AMP INC - 60620-1 - Connector. Mate-N-LOK Pins. Package of 10 Connector, Solderless Terminals, Straight contact orientation, round contact shape and form Electrical Contact Male Pins. Wire Size: 20-14AWG. Max. Current Rating: 15 A Operating Voltage: 250 VAC/VDC Type: crimp. For use with Mate-N-Lok housing. Operating Temperature: -55 to 105°C Contact Material: Brass. Contact Plating: Tin. Rohs Compliant. Package of 10. Learn More

Connector, IC socket. 18 Dip. Package of 20. Learn More

TE Connectivity AMP INC - 435704-4 Connectors, Shunt Switch.

Status: Discontinued

Four (4) position, 2.54 mm centers.

Color: Black

Contact Material: Brass

Housing Color: Black

Housing Material: Polyester

Mount: Through Hole

Capacitance: 2 pF

Current Rating: 2 A

Operating Temperature: -55 °C to -105 °C

Number of Contacts: 1

Number of Positions: 4

Orientation: Vertical

Throw Configuration: SPST

Dimensions: Height 2 mm, Length 10.2 mm

Pitch: 2.54 mm

Width: 7.37 mm

Color: Black. UL 94V-0.

Alternates: 450-1247, A26235, A26235-ND, 3398040.

Learn More

TE Connectivity AMP INC - 746610-9 -  Connector, Plug.

Housing Gender: Plug.

Contact Gender: Male.

Circuit count: 40 Position (2 rows).

Mounting Type: Ribbon cable.

Ribbon Cable, DIP Header

Number of Positions: 40

Cable Pitch: 0.050" (1.27mm)

Number of Rows: 2

Row Spacing: 0.100" (2.54mm)

Mounting Type: Through Hole

Cable Termination: IDC

Wire Gauge: 26-28 AWG, Stranded; 26-30 AWG Solid

Features: Feed Through

Contact Finish: Tin-Lead

Contact Finish Thickness: 100.0µin (2.54µm)

Color: Black

Note: Amp-Latch, w/o mating polarization.

Note: Most all are bulk and may require a bit of lead work.

Learn More

15-position shield & cable clamp Learn More

16-Position Closed end pin hood. Learn More

TE Connectivity - AMP INC - 747534-2 HDP shield only.

Learn More

TE Connectivity - AMP INC - 747533-2 HDP shield only.

Learn More