Featured Products

Connector, telecommunication. Housing gender: plug. Contact gender: male. Circuit count: 10 Pin modular jack. Mounting type: For 10 Conductor telephone cable. Learn More

LITZ Wire Cable 

Litz wire is a particular type of multistrand wire or cable used in electronics to carry alternating current (AC) at radio frequencies. The wire is designed to reduce the skin effect and proximity effect losses in conductors used at frequencies up to about 1 MHz. It consists of many thin wire strands, individually insulated and twisted or woven together. The result of these winding patterns is to equalize the proportion of the overall length over which each strand is at the outside of the conductor. This has the effect of distributing the current equally among the wire strands, reducing the resistance. Litz wire is used in high Q inductors for radio transmitters and receivers operating at low frequencies, induction heating equipment and switching power supplies.

Unshielded 3 Conductor Cable.

Conductor Type: Stranded.

Cable Diameter: 0.020" D.

Insulation: Outer JKT rubber, Interior Jackets Thermalplastic.

Note: LITZ Wire Cable.

Six Spiral Wound Bare Copper Conductors Wound Around Cloth.

Applications: Magnetic devices using wound copper Litz wire operate more efficiently than those using traditional magnet wire. For example, in the low kilohertz range, efficiency gains compared to ordinary wire can exceed 50 percent, while in low megahertz frequencies, 100 percent or more.

Priced by the Foot, Minimum Order Length: 10 Feet.

Learn More

Connector, Mini Din. Male 4 Pin to Male 4 Pin.

SVHS/S Cable

Quality Molded Cable.

For Macintosh Keyboard S Video (ADB).

Length: 56".

Color: Black

New Old Stock

 

Learn More

Ultrasonic receiver. From older sytle TV remote. Enclosure: aluminum. Dimensions: 4-1/2" long x 1" wide x 1-1/8" high. With a 6" 3 Conductor wire and a 3 Pin male molex connector out. Learn More

Switch top. Blue lens cover for T-1 3/4 lamps. Approximately 0.97 long x 0.73" wide. Learn More

Switch top. Red lens cover for T-1 3/4 lamps. Approximately 0.97 long x 0.73" wide.

same as SKU 4079 but colore Red

Learn More

Connectors, D-sub.

DB25 Female.

Contacts: Solder Cup, Gold.

New Old Stock

Alternate: Amphenol L77DB25S

 

Learn More

Telephone, access. 6 Pin modular jack wall plate. Learn More

RJ12 Input to 2 Way Outlet RJ11 Phone Modular Jack Line Splitter Adapter 6P4C Beige.

Easy to Connect telephone adapter is used to connect the line or the single jack of the telephone socket, with accurate signal transmission and clear sound quality for 2 way Outlet.

Durable High quality phone line splitter made of ABS material, non-toxic and harmless, Long Life.

Short length eliminates unnecessary clutter behind the phone and improves signal strength. 

1 Male Plug RJ12 to 2 Female Duplex Sockets, 6P4C RJ11 plug.

Single socket used to connect to line or telephone outlet

Double socket end used to connect 2 devices (Telephone, Fax, etc.)

Durable construction with ABS UL 94-V2 housing and thick gold plating on contacts

Approximate Dimensions: 165X26X21mm / 6.5”x 1.0”x 0.83”

Telephone, Splitter. "Y", Male 6 pin phone connector to 4 pin female out on a 4" pigtail.

Applications: Telephone, Fax Machine, Ooma VOIP telephony unit, Office Equipment.

Alternates: a14122900ux0039, 9SIA623HZ28791, SPM7921066923, a14062600ux0566

RJ11 is an older version of RJ12, and they are the same size. The difference is that RJ11 uses four internal wires (called conductors) while RJ12 uses six. RJ12 is backwards compatible with RJ11, but RJ11 will not work with RJ12.

Learn More

CBO - Hardware, Insulator/Stand-Offs. Heavy Duty.

Material: Brass and Ceramic.

Base mount: Oval with 2-1/4" centers (1-5/8" x 2-7/8").

Dimensions: 4" Tall.

Porcelain Insulator: 1.25" Diameter

Brass Support: 1.625" Diameter

Weight: 1.1 lb.

Applications: High Power Transmitters 

Alternate/Similar: Lapp 14760 & 24114

Proudly Made in USA

Learn More

Rubber foot/Idiot plugs , Black. Face: 3/4" dia. Lower plug = 1/2" dia.Could be used as non slip feet. Learn More

Connector. Gender changer 25 Pin male to male. Learn More

TE Connectivity - KS21320L3 Bi-Pin Panel Mount Lamp Holder, T1 ¾ For 2 Pin (Bi-Pin) lamps. Bore: 0.26” Inner Diameter Hole w/Flat. Outer Diameter Body: 0.315” External Diameter Step: 0.365” Socket is 0.86" Long Body Two - 0.4" Solid, Radial Leads (Gold Plated). Connection: Solder Bulb Size: 6mm T1 ¾ Size Bulb New Old Stock Proudly Made in USA Learn More

Connector, Terminal Strip.

Termination: 4 Position, Quad Screw.

Mount: Panel or Chassis.

Material: Bakelite / Phenolic.

Rear Contacts are Solder Lugs.

Dimensions: 2.561" long x 0.627" wide.

Two Hole Mount, 2.16" Centers.

Vintage - New Old Stock - Bulk Packed Mixed Brown & Black

Made in USA

Applications: Repair / Restoration - Vintage Antenna / Speaker Connections.

Learn More

Connector, header. Assortment. Housing gender: plug. Contact gender: male. Mounting type: PCB. Note: Assortment of male header connector. Such as: 1 Pin, 3 pin, 5 pin, 2x3, 2x5, 2x13, 2x7 RA, 2x3 RA, 2x11 RA. Note: Package of - Approximately 65 pieces is 1.2 ounce. Bulk packaged, so quantity of each - may change. Learn More

AAVID Boyd - 530002 - 530002B02500G - Hardware, Heatsink Extruded. For TO-220 Components.

Designed for: TO-220     

Heatsink Material: Aluminum    

Fin Style: Extruded Radial Fin     

Thermal Resistance: 3.7 C/W      

Length: 25.4 mm             

Width: 41.91 mm            

Height: 38.1 mm

Color: Black

Dimensions: 2-1/2" long x 1-5/8" wide x 1" high.

With two mounting pins for PC board or connecting multiple heatsinks together.

New Old Stock

Learn More

Unidentified MFG - 8-862 Hardware, Cable Clamps.

Vinyl coated loom clamps are the go-to protection from loom, wire, and cable runs. Each vinyl coated loom clamp is created with a molded vinyl coat that acts as a cushion to further assist in reducing vibration. These clamps are ideal for general wire fastening applications, such as fastening wire harnesses, hydraulic hoses, and cables.

Diameter: 1/2".

Material: Vinyl Over Steel.

Mount: 1/4" slot.

Package of 10.

Learn More

Switchcraft - 05GM5M - 05GM5MX - Connectors, Din.

The two piece metal barrel surrounds pin insert to form an electrical shield. The entire insert assembly is held together by snapping the insulated plastic shell over the assembly. The barrel's special metal tab locks the shell in place.

Status: Discontinued

Rating: 3A, 34V

Dielectric Withstanding: 500 V (RMS)

Recommended Wire Size: 22 AWG

Male 5 Pin.

Mount: Cable.

Mixed inventory of Grey, Beige or Mostly Black Shells Remaining.

Note: Will mate to our P/N: CL-213571 female SKU 138242, not included.

New Old Stock - Rare - Difficult Connector to Find

 

Learn More

Hardware, Stake. 

Material: Hard Plastic/Rubber, Pointed.

Dimensions: 1" wide x 9 1/2" long.

Color: Black.

Perfect for marking plants in your garden or hobbyist projects.

Package of 10.

Learn More

Filters, RF.

Assembly with Two Female SO-239 RF Connectors.

Partially enclosed with aluminum housing 5-1/16" long x 1-7/8" wide.

Overall with mount 6" long 5-5/16" mount centers.

Learn More

Connector, coaxial. TNC female with pins to crimp cable end connector for RG58 coax. Learn More

Unidentified MFG - 8-377 - Control /Instrument Knob.

For 1/4" half flattened shaft.

Tappered and knurled Grip.

Material: ABS, black with Silver top and Directional Indicator.

Dimensions: 0.556" D at top, 0.753" D at base x 0.685" high.

Learn More

Connector, D-Sub. DB25 Male to 10 Position Female IDC.

On a 9 Conductor Flat Ribbon Cable.

Overall Length: 10".

Note: Used / As removed from Equipment

Learn More

Hardware, enclosure. No lid. Dimensions: 4.97" long x 2.975" wide x 1.80" high. ID: 4.750" long x 2.742" wide x 1-11/16" deep. Material: plastic. Color: green. Learn More