Featured Products

Cartridge Heaters for Plastic Injection Molding Machines. Stainless steel, 1200watts, 220V. Case: 0.785" D x 26.25" long. Learn More

Cartridge Heaters for Plastic Injection Molding Machines. Stainless steel, 1025watts, 220V. Application: Used in injection molding machines. Case: 20mm D x 665mm long. Learn More

Cartridge Heaters for Plastic Injection Molding Machines. Stainless steel, 1000watts, 240V. Case: 20mm D x 635mm long. Learn More

Cartridge Heaters for Plastic Injection Molding Machines. Material: brass. 1000watts, 240V. Case: 0.785" D x 24.875" long. Learn More

Connector, IC socket. 20 PIN DIP.

Machined pins and gold contacts.

Low profile.

Package of 10,

Learn More

Connector, header. 10 Pin male, dual row (5 x 2), enclosed. Mount: PCB. Note: Marked 10P. Package of 10. Learn More

Crystal. 2.4576MHz. Package: large metal can, radial leads. Dimensions: 0.746" wide x 0.298" deep x 0.777" high. Lead spacing: 0.462". Manufacture: BME. Learn More

Hardware, cable clamp. Mount: easy-to-install adhesive. Closed: 1/2" x 7/16". Dimensions: base 1" x 1" x 1/2" high. Package of 5. Learn More

Unidentified MFG - 43370 - Hardware, Washer. 1" OD.

Rubber washer with 0.25" hole x 0.058" thick.

Material: Rubber.

Note: Feels like silicone rubber.

New Old Stock.

Applications: Electrical or Vibration Isolation / Suppression

Package of 25.

Learn More

Rolling Ball Tilt Switch. Direction indicating Switch, TO-39-4 style case. Gold plated leads, and internal contact ball Highly Sensitive to detect basic motion/orientation. Environmentally safe, non-mercury electronic switch. Sealed type available for heavy humidity environment, free from bad connection or problems caused by contact oxidization. Poor man's accelerometer. The TO-39 package is a family of metallic can package used for hermetically sealing devices. The metal case can be gold coated. An internal gold-plated ball inside the sealed case touches one of 4 leads when tilted about 25-degrees or more. Since the leads are 90-deg apart you can sense which direction the device is leaning or tie the 4 together and any shaking or movement off level will cause contact closure. Has four leads on the bottom and one on top. Rolling Ball Tilt sensors allow you to detect orientation or inclination. They are small, inexpensive, low-power and easy-to-use. If used properly, they will not wear out (100,000 Cycle life). Their simplicity makes them popular for projects, toys, gadgets and appliances. Typical Applications - Alarms, Safety, Security, Directional Position, Vibration, Movement Detection, Portable Heaters, Games, Toys. Last picture shows a dissected TO-39 case to show internal gold plated ball and four Gold plated contact leads. Mounting: Through Hole (PCB) Operating Temperature: -20 C to 70 C Alternates/Similar Devices: RB-220-07A R, RB-231X2, AG1262-1, 1835-1156-ND, RBS040200 Made in USA Vintage - New Old Stock Significant discounts provided for bulk purchases. Learn More

Transformer, video. Matching. 75 Ohm to 300 Ohm. Cable assembly 55". Learn More

Transformer, Video.

Matching. 75 Ohm to 300 Ohm.

Frequency: 5-900 MHz UHF/VHF/FM

Plastic Case.

Dimensions: 1.328" long x 0.917" wide x 0.945" high.

Alternate: UMT-7-4.

Learn More

Transformer, video. Matching. 75 Ohm to 300 Ohm. Plastic case. Dimensions: 1.75" long x 0.8" wide x 0.975" high. Learn More

Diode, zener. 4.3V 100mA 500mW. Package: glass, DO-35 axial leads. Note: Silicon epitaxial planar. Learn More

Connector, IDC. 40 Way. Unpolarised. Dimensions: 50.42mm long. Color: black. Learn More

2SA1275 Transistor, PNP.

Type - PNP

Collector-Emitter Voltage: -160 V

Collector-Base Voltage: -160 V

Emitter-Base Voltage: -6 V

Collector Current: -1 A

Collector Dissipation - 0.9 W

DC Current Gain (hfe) - 60 to 320

Transition Frequency - 50 MHz

Operating and Storage Junction Temperature Range -55 to +150 °C

Package - TO-92MOD

Note: Silicon epitaxial planar.

Learn More

Transistor, N Channel FET. Breakdown Voltage Vbr:-25V. Gate-Source Cutoff Voltage Vgs(off) Max:-10V. Continuous Drain Current Id:150mA. Gate-Source Breakdown Voltage:-25V. Package: TO-92. P/N: PN5432. Learn More

Hardware/resistor clip. Mounting clip. Dimensions: 12.7mm long x 8.7mm wide at base (outside), 7.8mm wide (inside) x overall 9.7mm high. Learn More

Keytop. With up (or down) arrow. Dumby switch top. Material: plastic, gray. Note: Correct P/N may in fact be 105-655? Learn More

Transistor, PNP. Voltage: 40VCEO, 30VCBO. Max current: 3 Amp. Dissipation: 28 watt. Package: MS-7 heatsinked, gold leads. P/N: 2N1760. Note: germanium. Learn More

Connector, electrical contact. Housing gender: plug. Contact gender: male. Contact plating: Gold. Outside dimensions: Overall 0.55" (14.0mm) long with the actual male working contact 1.0mm D x 0.312" (7.9mm) long . Note: Tri-band - orange, blue, white. Generally seen used in circular connectors. Package of 10. Learn More

Switch, Slide.

Contacts: 4PDT.

Contact Ratings: 6Amp 125VAC.

Actuator: Momentary.

Actuator Length: Flush

Connection: Solder Terminals.

Body: 1.394" long x 0.560" wide behind panel.

Mount Fange 1.893" long x 0.56" wide with 1.6" centers.

Note: Actuator: Flush, Spring.

New Old Stock

Learn More

Connector, header. Male 8 pin (Dual 4). Mount: RA. Package of 10. Learn More

Connector, header. Male 24 pin. Straight. Leads 1.2mm x 1.2mm x 11.6mm long. Lead spacing: 3.8mm. Learn More