Featured Products

C.P. Clare & Co - HG4A1011 - 4PDT 24VDC

390-Ohm Coil

Mercury Wetted-Contact Relay

14 Pin Round Plug-in Base

Hermetically Sealed

Overall Length: 3.930 inches nominal

Mounting Facility Type and Quantity: 3 threaded stud single mounting facility

Duty Type: Continuous

New Old Stock

NSN 5945-00-983-8895

Note: Retail over $1200

Learn More

Hubbell Burndy - HBLB14S-5 - Connector, Rectangular, Female Header 1 X 14.

Housing Gender: Receptacle.

Contact Gender: Female.

Circuit Count: 14 Inline.

Pitch: 2.54 mm (0.100")

Mounting Type: PCB.

Connection: PC pins.

Outside Dimensions: 1.614" long.

Learn More

EATON - COOPER BUSSMANN - 1B0024 - Now H60030-1S - Fuse Holders.

One (1P) Single Cartridge Fuse Holder, 30Amp 600V.

Wire Connector Style: Screw with Clip.

Material: Thermoplastic.

Construction Size: UL Class K5

Breaking Capacity: 10kA

Wire size leads: #10 - #8 (10 & 8 AWG)

Dimensions: 6.25in.(L) 1.54in.(W) 1.73in.(H).

Max. Rating: 200,000 RMS

Alternate:  R60030-1SR.

Approvals: CE, UL Listed, CSA

New Old Stock

Proudly Made in USA

 

Learn More

C & K Components - 7103J60ZMI32 Switch, Toggle/Paddle.

Contacts: SPDT.

Contact Ratings: 5Amp 120V, 2Amp 250V.

Contact Material: Silver

Operating Temperature: -30 C to 85 C

Actuator: On-Off-On.

Connection: PC leads.

Mech: Panel, Snap-in.

Panel Hole: 17mm long x 12mm wide x 17mm behind panel plus contacts.

Note: Red Paddle J60 actuator.

Electrical Life: 40,000 Cycles

Complete with black bezel 19.43mm long x 15.62mm wide.

New Old Stock

Learn More

Pressure gauge/transducer. -0.43 to +1.56 PSIG. Zero to 5000 Ohm in one second. Package: stainless steel. Learn More

C & K Components - 7205MY9AGE Switch, Toggle.

Contacts: DPDT.

Contact Ratings: 5Amp 120VAC.

Actuator: (On)-Off-(On).

Connection: PC Right Angle (RA) Trminals.

Mech: PCB. Body: 12.9mm long x 11.4mm wide x 11.0mm high.

Overall with actuator and contacts 31.2mm long.

Note: Center off.

Non-threaded bushing 6.9mm long.

Actuator: 6.9mm long.

Miniature C&K 7205.

Learn More

IC. Sample and hold amplifier. High speed, bipolar, monolithic. Case: 14 Cdip. Learn More

IC, A/D converter. 16 Bit. Conversion time: 17us. Operating temperature: -25 to 85 Deg C. Package: 32 Cdip hermetically sealed. Learn More

C & K Components - MG00L1NZQD Switch, Rotary.

Contacts: 1P12T. (1 pole, 12 Position)

Contact Ratings: 125VAC (or 28VDC) Switching 250mA, Carry 6Amps.

Contact: Silver Plated Copper Alloy

Connection: Solder.

Electrical Configuration: Non-shorting.

Continuously Rotating Shaft or Use Stop Ring

Mech: PC, Vertical.

Body: Bushing 0.25" D x 0.243" Long.

Body: 0.511" Diameter x 0.374" High.

Shaft: Flattened 1/8"D x 0.391" Long.

Life: 10,000 Cycles

Sealed IP67

Note: M Series: Half-inch Rotary Switches.

Genuine C&K - Individually Sealed in anti-Static & Non-Corrosive Package

Learn More

C & K Components - 3TMA-4A Switch, Micro. with Roller.

SPDT NC/NC

15Amp 1/2HP 125, 250VAC/ 0.25Amp 250VDC/ 0.5Amp 125VDC/3Amp 125VAC.

Operating temperature: 67 Deg F to 302 deg F (55 Deg C to 150 Deg C).

Double marked: TMCJ4A.

Listed: UL/CSA.

Note: Cam Rotary.

New Old Stock

Learn More

Burndy - 107-101-3A - Connector, D-Sub.

Status: Discontinued

Right angle PCB connectors are popular for many I/O applications.

Housing Gender: Female Receptacle.

Positions: 25

Number of Rows: 2

Contact Gender: Female.

Circuit Count: DB25.connection

Connection: PCB Solder

Mounting Type: Chasiss, Right Angle.

Alternates: SD25S-RA-PC, 574761, 5747846-5

New Old Stock

Applications: Serial data transmission, Data networks, Instrument control, Device management

Learn More

CALEX - 5D15.150 - DC/DC Converter.

The versatile 5 Watt Dual Output converter is particularly suitable for use in microprocessor systems where 5 Volts is the primary power source, and where a low noise plus and minus output voltage is required.

Status: Discontinued April 2020

Features
• Low Input/Output Noise Operation
• Low Profile Case (0.40”)
• Isolation Capacitance of 50pF
• Extended Operating Temperature Range of -40ºC to +100ºC.
• Fixed Frequency Operation

Input: 5V.

Dual Output: +/-15V 150mA 4.5 watt.

Mount: 5 Pin Module PCB.

Dimensions: 2" Square x 3/8" High.

Proudly Made in the USA.

Learn More

BODINE ELECTRIC - NSY-13 Motor. 

AC. Supply: 230VAC Single Phase, 50Hz 0.5Amp.

HP: 1/50. Thermlly Protected

Speed: 1500 RPM.

Insulation: A1

Direction: Counter Clockwise. Continous Duty.

Dimensions: Overall 5-1/2" long (including shaft) x 3-1/4" wide x 3-1/3" high.

Shaft is 1/4" (0.254") D x 5/8" 90.616") long.

Alt #: G0123043 

Perminently Lubricated Ball Bearings

Packed Weight 5 lbs.

Note : This motor does not come with mounting hardware/screws. 

There are 4 mounting holes on the motors bottom surface: centers are approximately 1-1/4" (length) and 1-5/8" (width) centers. Holes are approximately 0.4" deep and have 10-32 threads. 

New Old Stock - Made in USA

Learn More

Connectors, TNC. Male to RG-174 coax crimp end. Contacts: gold plated pin. Furrele: black. Package of 5. Learn More

BOSCH 0-332-104-001 - 0332014162 Relay, Power.

Input: DC.

Contacts: SPST NO.

Contact Ratings: 40Amp.

Coil Voltage: 12VDC.

Coil Resistance: 1780 Ohm.

Connections: PC Contacts.

Mech Mtg: PCB.

Size: 1.09" Square x 1" high.

Weight: 1.2 ounce.

Rare - New OEM Component 

Double Marked: 7L27A

Alternates: Ford E6DF14A640CA 

Made in Germany

Applications: Toyotas 

Note: Check Picture for contact arrangement.

Learn More

BEMAN - MP-6 Resistor, Ceramic.

Resistance: Precision 1090Meg Ohm.

Power: 6 Watt.

Tolerance: 2%.

Voltage: 30KV. Glass-like. Spiral Wound. Precision.

Dimensions: 5/16" D x 6" long.

Alternates: Heath Kit P/N 2-47, RCA WG-206, BE1090

New Old Stock

Additional Information: https://www.utm.edu/staff/leeb/Probe.pdf

Application: Fits Heathkit Model 336 and RCA WG-289 or WG-297 High Voltage Probes and others.

Note: Handle the 1090 resistor with care, very fragile.

Learn More

BELDEN WIRE - WR20315 Type SO - Cable, Unshielded.

14-3C. (14 AWG 3 Conductor).

BC - Bare Copper

Type SO.

Extra Heavy/Thick Rubber Jacket.

Conductor Type: Stranded, Unschielded.

Cable Diameter: 0.55".

Internal Wire colors: Brown, Blue, Green - 14awg 3C

Note: E-3462. LL-7874.

Applications: Heavy Duty Flexible Power cords.

Priced by the Foot. Minimum order Length: 50'.

Learn More

BIRD - 8306-100-N - Coaxial Attenuator, 10dB 25 Watt. New Built to last. Easy to trust. Proven for over 80 years - Bird’s RF attenuators give you precise, reliable control over signal strength whether you’re testing, troubleshooting, or integrating sensitive components. Built to handle high power and harsh environments, our attenuators help prevent overload, reduce reflections, and maintain system performance without compromise. Bird's RF Attenuators are components that reduce the amplitude level for an incoming signal and are used to protect systems from receiving a signal with a power level that is too high to process. Convection RF Attenuators feature a self-cooling design and are fully shielded. Attenuators are a valuable accessory for reducing power levels, isolating components under test, analyzing harmonic signals, and serving as comparison standards. Coaxial Attenuator (Monodirectional) Type: "N" Male to N Female Connectors. Status: Discontinued 10dB Broadband with =/_0.4 dB Error Power Rating: 25 Watt Continuous, 3kW Peak (5 Seconds), 5W Max Revese. Frequency Range: DC-4GHZ Temperature Range: -55C to 70C Coolant: Dry, Convection Air Cooled Finish: Black Anodized 50 Ohm. NSN 5985-01-322-5537 Dimensions: 0.994" (25.2mm) D x 5.357" (136.0mm) long. New Old Stock Learn More

BIRD - 5-1357-3 Connector, Electronic Solder Eyelet, Rivet/Eyelet/Terminal.

Electronic eyelets are flanged tubular metal conductors inserted into a printed circuit board. They make electrical continuity between the circuitry on both sides of the board, and are an attachment point for soldering component leads.

Type: Solder.

Appears to be Silver Plated Brass (High thermal and electrical conductivity)

Metric Dimensions: Outside lip is 6.1mm OD, 2.9mm ID with a shaft 3.5mm round and 6.7mm tall under Lip.

Inch Dimensions: Outside lip is 0.240" OD, 0.114" ID with a shaft 0.138" round and 0.264" tall under Lip.

Applications: Secure High Current Electrical and Ground Connections or repairs to chassis and PWBs.

Chose the proper eyelet keeping the following in mind:
LUF The length of the eyelet barrel under the flange should be 0.020-0.035”/0.630-0.890mm greater than the thickness of PCB(this allows the for the right length after the flange is formed)
ID Eyelet inside diameter should be 0.003-0.020”/0.075-0.500mm greater than the component lead diameter for proper fit of  the eyelet through-hole component lead.
FD The flange diameter should be sized so that it does not protrude out onto other pads or conductors in the vicinity
OD The clearance in the PCB hole should allow the eyelet to be inserted without undue force but, but should not exceed 0.125mm greater than the eyelet outside diameter.

Additional Information: http://www.intl-eyelets.com/short_course_on_electronic_eyelets.htm

Genuine Vintage Bird Electronics Hardware - New Old Stock

Package of 100.

Learn More

Beautiful Military Hermetically Sealed 22-Flatpack Hybrid Negative Temp, Actually Marked Lockheed Martin 6086451-7 and Beckman 165-1423-1 NEG TCV. NSN 5962-01-099-9214 Learn More

Bomar Interconnect Products - SPX55062 Connector, BNC.

This nickel plated BNC female to female bulkhead coupler will allow the connection of two BNC male connectors.

Bulkhead Adapter F/F.

Side A: BNC Female

Side B: BNC Female

RF Pin Plating: Gold

Body Plating: Nickle Plated Brass

Impedance Ohms: 50

Max. Frequency: 4 GHz

Orientation: Straight

Other Detail: Chassis or Bulkhead Connector

Package Quantity: 1

Includes Lockwasher and Nut

Dimensions: Length 32.8 mm X Largest Diameter 15.5mm

Recommended Mounting Hole 13 mm Hole with 12.1 mm Anti-Rotation Flat

Made in Taiwan.

Alternate: Amphenol RF 031-220G-RFX, Newark Radiall R141720000, W5SWl 72140541480

Applications: RF Communications

Learn More

BAUSCH & LOMB OPTICAL - 9-138 - 18" Optical Ellipse Scan Mirrors An "Ellipse Scan Mirror" refers to a type of optical mirror with a reflective surface shaped like an ellipse, designed to precisely direct and focus light by utilizing the unique property of an ellipse where all light rays originating from one focal point converge at the other focal point, making it ideal for scanning applications where precise light direction and focusing are crucial; essentially, it's a scanning mirror with an elliptical reflective surface. Dimensions: 18" x 5” Ellipse Scan Mirror Highly reflective on both concave as well as convex sides. High Quality / High Reflectivity of 99.5% or More. Serialized Functional Specification Sheets as Pictured are Available Very Fragile - Partial Transmission Applications: Science projects, telescopes, laser systems, solar concentrators, optical microscopes, fiber optic coupling, stage lighting, and certain types of projectors including medial imaging. Made for IBM - Made in USA Learn More

Molex Beau Vernitron - 1941529A6  - Terminal Strip / Block.

6 Position, 2 x 6 Screw.

Voltage Rating: 1100.0 V

Current Rating: 15.0 A

Gender: Male

Mount: Flat Panel.

Material: Brass, Nickel Plated

Dimensions: 2.925" Long x 0.87" Wide x 0.42" High.

Proudly Made in USA

Alternate/Equivalent: 6-140, 600-GP-6

New Old Stock

 

Learn More

Applied Motion Products Inc  - 4017-838  - 776619324 - Precision Unipolar Stepper Motor

A unipolar stepper motor has two windings per phase, one for each direction of magnetic field. Since in this arrangement a magnetic pole can be reversed without switching the direction of current, the commutation circuit can be made very simple (eg. a single transistor) for each winding.

Status: Discontinued 

12VDC Stepper Motors 0.16Amp

100 Steps/Rev 3.6Deg/Step

4-Phase 75-Ohm,

Torque: 700 Ounce/Inches

MPI SPEC# 77619324

Dimensions: 42mm Square x 33mm Deep

Mounting: 2-slots 62mm apart on 55x78mm flange

Shaft: 4.9x11.1mm 

Unipolar 6-Pin Connector (5 wires)

Made in Japan - New Old Stock

Application: Robotics

Learn More