Featured Products

TRIRIDGE - 103-400-12M - High Current Reed Relay, 12VDC 4PST, New The TRIRIDGE - 103-400-12M High Current Reed Relay is a vintage new product designed for industrial and electrical applications. This shielded relay operates on 12VDC with 4 poles and single throw, making it ideal for high current switching tasks. Manufactured by Triridge, this reed relay offers reliable and efficient performance in various settings where precise switching is required. A relay consisting of an energizing coil and a metallic reed switch mechanism. The reeds serve as both core and contacts, which are not hinged or pivoted and which move by flexure when acted upon by a magnetic field induced by energization of the coil. It may also include a biasing magnet. The biasing magnet, either aids or opposes the movement of the reeds and the opening or closing of the contacts. Axial lead epoxy molded reed relays have solid wires on each end. Status: Discontinued Vintage Voltage: 12VDC Coil Resistance: 225 Ohm Current: 60mA Shielded High Current Reed Relay Connection: Gold Plated Right Angle Leads Operating Temperature: -40 C to 85 C Vintage Genuine Triridge – Rare – Difficult Component to find. Made in USA New Old Stock Additional Information: https://sst.semiconductor-digest.com/2014/10/the-mystery-of-reed-relays-understanding-specifications/ Learn More

TRIRIDGE - 103-100-12 - 41A261432 - Relay, Reed. Coil: 12VDC 1000 Ohm Coil. SPST, New The TRIRIDGE - 103-100-12 Reed Relay is a vintage new product designed for industrial and electrical applications. This shielded relay operates on 12VDC with Single Pullo Single Throw (SPST), making it ideal for switching tasks. Manufactured by Triridge, this reed relay offers reliable and efficient performance in various settings where precise switching is required. Reed relays can switch faster than larger relays and require very little power from the control circuit. A relay consisting of an energizing coil and a metallic reed switch mechanism. The reeds serve as both core and contacts, which are not hinged or pivoted and which move by flexure when acted upon by a magnetic field induced by energization of the coil. Axial lead epoxy molded reed relays have solid wires on each end. Status: Discontinued Vintage High Density Miniature Single-in-line SPST-1Amp (or more) 12VDC Reed Relay 1K Ohm coil Axial Lead, One on one end and 3 leads opposite end Dimensions: 44.9mm x 12.6 mm round. Operating Temperature: -40 C to 85 C Vintage Genuine Triridge – Rare – Difficult Component to find. Proudly Made in USA New Old Stock Additional Information: https://sst.semiconductor-digest.com/2014/10/the-mystery-of-reed-relays-understanding-specifications/ Learn More

LED. 2V 1Amp. Peak wavelength: 655nm. Half-intensity beam angle: 60 Deg. Luminous intensity: 300ucd. Package T1 dome. Color: Red, diffused. Package of 10. Learn More

IC. Charge-coupled device (CCD). Case: 44 SMD. Used, perfect socket pulls/guaranteed. Learn More

Thermalloy/Aavid - 5-600 -  Hardware, Heatsink.

Designed for applicatons with airflow traveling in a single direction such as chassis, power supplies, chargers, and rectifiers.

Square Bar.

Extruded Aluminum Channel

Black Anodized.

Dimensions: 5.3" x 0.75" x 0.77".

Learn More

IXYS Corp - THETA-J - JTB1210-1 - Relay/Switch, Solid State, PowerBLOC Triac-Based.

Normally Open 20VAC

Peak Blocking: 400V

Output: 10A Output Switch/120 V

Isolation: 2500V Isolation

Input Control 9VDC.

Mount: Panel Mount or PCB.

Dimensions: 20.7 mm square x 14.7mm high including flange base.

Flange Base is 35.8mm long x 21.0mm wide.

New Old Stock - Slight tarnish on base does not affect Operation.

Alternate:  OFB2410-1

Learn More

Toshiba - TA7343AP IC, audio.

The TA7343AP is PLL FM stereo multiplex IC. It is suitable for automotive applications and portable radio applications because of space merit by the package and wide supply voltage range.

Linear FM PLL MPX stereo-decoder

Ucc-3,5 12V.

Package: 9 Sip.

Learn More

Connectors. PCB mount 32 x 3 rows. Learn More

TOMCO - 3472R5 - Valved Flareless Tube Plug Fitting 

Tomco's precision line of couplers are ideally suited for instrumentation and chemical processing applications.

316 Stainless Steel Construction

Positive roller lock latching mechanism allows 360 degree swivel action

One hand required to connect or disconnect

Viton seals 

Smallest possible dimensions with maximum orifice size.

Integral flareless tube port fitting

Temperature range +20F to 400 F

Vacuum Data - connected 29.50 in. Hg

1/4" Tube

Packaged in factory reusable clear protective plastic tube

Note: Valved plug P/N 3472R5 must be used with valved coupler P/N 3452R5

Made in USA 

 

 

Learn More

Tenna - 2SA354 Transistor, PNP.

Polarity: PNP

Maximum Collector Power Dissipation (Pc): 0.08 W

Maximum Collector-Base Voltage |Vcb|: 25 V

Maximum Emitter-Base Voltage |Veb|: 1 V

Maximum Collector Current |Ic max|: 0.01 A

Max. Operating Junction Temperature (Tj): 75 °C

Transition Frequency (ft): 12 MHz

Collector Capacitance (Cc): 4 pF

Forward Current Transfer Ratio (hFE), MIN: 70

Package: TO1

Similar TO1 Transistors having similar specifications: (confirm your specifications before substituting):

2G413, 2N1632, 2N1634, 2N1636, 2N1637, 2N1638, 2N1639, 2N2957, 2N4106, 2N4106A, 2SA353, 2SA353A, 2SA354, 2SA354A, 2SA355, 2SA355A, 2SA370, 2SA380, 2SB190, 2SB271, 2SB272, 2SB273, 2SB350, 2SB350A, 2SB350H, 2SB370, 2SB370A, 2SB370AH, 2SB408, 2SB429, 2SB450, 2SB450A, 2SB459, 2SB460, 2SB460A, 2SB460B, 2SB470, 2SB619, 40261, 40262, HEPG0008, HEPG0009, XC121, XC131, XC171

 

 

Learn More

Transistor, IGBT, NPN. Max voltage: 600V. Max current: 300Amp. Package: Module. P/N: MG300G1UL1. Note: Silicon, triple diffused. With hardware. Learn More

Connector. TNC male with green cord grip. Dimensions: 0.80" D x 2.6" long. Marked TIMES-TIMATCH. EM-18S. Learn More

THERM-O-DISC - 20MAA3FA – Normally Closed Contacts Motor Protecting Temperature Sensor Switch. The Therm-O-Disc line of Motor Protectors offers accurate and reliable protection against hazardous overheating in single phase/single voltage A/C motors. This motor protector employs a snap-acting, current and temperature responsive bimetal disc for proven performance over life. An internal resistance heater utilizes the effects of current to bias the operation of the bimetal disc for added thermal response. A wide range of bimetal and heater combinations are available to cover specific design requirements. This design flexibility and proven performance has made Therm-O-Disc Motor Protectors a popular choice among the leading manufacturers of fractional horsepower motors. The operating mechanism inherent to all Therm-O-Disc Motor Protectors is the snap-action bimetal disc. During abnormal conditions, heat generated by resistance and/or motor ambient causes the bimetal disc to snap at the specified calibration temperature. This allows the circuit to open within the maximum safe limits of the motor windings. Once the motor returns to a normal operating temperature, the bimetal disc resets automatically. This closes the circuit and re-energizes the motor. This same snap-action principle is utilized in millions of Therm-O-Disc products applied in the appliance, heating and air conditioning industries. The Motor Protector features include: • High-speed contact separation ensures long contact life. • Current and temperature responsiveness for excellent design flexibility. The Motor Protector series has been rated by major agencies throughout the world. The agency ratings can be used as a guide when evaluating specific applications. However, the mechanical, electrical, thermal and environmental conditions to which a control may be exposed in an application may differ significantly from agency test conditions. Therefore, the user must not rely solely on agency ratings, but must perform adequate testing of the product to confirm that the control selected will operate as intended in the user’s application. This is an over temperature motor protector which opens its contacts (SPST) when excessive temperature is sensed. Bimetal Resistance: 0.0015 Ohm, Heater Resistance: 0.0320 Ohm Temperature: Opens @ 110 C (230 F), Closes @ 45 C (113 F) Current Rating: 50A @ L.R. 120V, 37 A @ L.R. 240V Dimensions: 1.38" Wide x 1.32" X R2.50 Radius Curved 0.38" Thickness. Weight: 0.5 Ounce (15 Grams) Termination: Two Side Entry 1/4" Quick Connect Terminals. Applications: Commercial, Industrial, and Residential, Including Several Whirlpool, Maytag, Kenmore Dryer as a motor fuse. New Old Stock Made in USA Learn More

Connector, rectangular. Housing gender: plug. Contact gender: male. Circuit count: 50 pin dual row (25 x 2). Pin spacing: 2.54mm. Note: HDR IDC P 50 ST .06 CIS. 1437065-1 (14370651). Learn More

Relay, SSR. Contact Ratings: 0.75Amp. Coil Voltage: 90-140VAC. Control: 3-7VDC. Connections: 4 Pin. Mech Mtg: PCB. Packaging: Enclosed. Size: 1.105" long x 0.602" wide x 0.426" high. Note: 100 watts @ 125VAC. Learn More

EMERSON THERM-O-DISC - 36TX22 13038 F230-40 - Thermostat, Thermal Cut out. F230-240, Normally Open.

The 36T auto reset control from Therm–O–Disc® offers proven reliability in a compact, versatile, cost–effective design. The snap action of the bimetal disc provides high-speed contact separation resulting in excellent life cycle characteristics at electrical loads up to 15 amps at 120VAC and 10 amps at 250VAC.

Thermostat, thermal cut out.

Thermostatic switch, bi-metal 1/2" (12.77mm).

Contacts: (2) 0.17" solder term, one on each side. 

Set Point: Normally Open contact closes at 230F and closes when temperature lowers to 190F.

Mount: panel, round 17.7mm with 24mm centers

Two male 3/16” (4.8mm) quick connect Blade Terminals which can also be soldered.

Snap Action SPST Contacts Automatic Reset

Typical Applications The 36T is applied to a wide variety of applications as either a regulating control or a safety limit. Examples of applications include: • Coffeemakers • Water heaters • Sandwich toasters • Furnaces • Dishwashers • Boilers • Dryers • Electric heaters • Washing machines • Office equipment • Refrigerators • Automotive seat heaters • Microwave ovens

Proudly Made in USA - New Old Stock

Learn More

Transistor, NPN. Max voltage: 400VCEO, 500VCBO. Max current: 1Amp. Dissipation: 40 watt. Package: TO-220. P/N: TIP50. Note: Silicon. High Voltage. Learn More

Texas Instruments - TIL149 Sensor, Reflective Detector.

Reflective source and sensor.

Optical switch assembly.

Discontinued and Difficult to find.

NSN 5840-01-111-8238

Alternate: Honeywell HOAO149-001 

 

Learn More

Image sensor, pixel. Charged coupled device (CCD) 1158X488/ High resolution. Package: 22-Cdip gold. Spec sheet avail upon request. Learn More

Texas Instruments - TIP33 - Transistor, NPN.

Max voltage: 40VCEO, 80VCBO.

Max current: 10 Amp.

Dissipation: 80 watt, 3.5 watt free air.

Gain: 3MHz.

Package: SOT-93.

Note: Silicon.

Operating/Storage Temperature: -65 to 150 Deg C.

Genuine Texas Instruments - New old Stock

Learn More

Texas Instruments - AC9500 - 18V 1.35A Transformers, Dual.

AC output 18VAC at 1.35Amp and 8.5VAC at 150mA.

ICC-2-1500-1-CL2.

Complete with a 4 foot, 2-conductor power cable.

Output cable approx 7.5' with a 4-pin connector.

Mount: Desk top.

Listed: UL/CSA.

New Old Stock

Learn More

Stainless steel blunt dispensing tips, 26AWG x 1/2". Color: light beige. Package of 50. Learn More

26VDC DPDT Relay TO-5/9 RFE/Used 1/2" cut leads very good condition Learn More

PROBE replacement parts 8-1/2 Foot probe cable with an uncovered probe at each end - 0ne end single cond wire 2-3/4" long - other end has 180-ohm res in series with output - No probe covers or connectors Learn More