Featured Products

Lumileds Lighting, LLC - LXHL-DW01 - LED.

Status: Discontinued

Voltage/Current: 3.42V 350mA.

Luminous flux: 40.5lm.

Viewing angle: 85 Degree.

Lamp size: 5.8mm.

Power Dissipation: 1 W

Side emit.

Color: Cool white.

Package: SMD.

Operating temperature: 40 to 120 Deg C.

Rohs compliant.

Learn More

LUMBERG - RKW30-695/5M Mini Cordsets.

Single-Ended Right-Angle.

Quick Disconnect 3 PinConductor

Euro AC Color Code.

18 AWG PVC Cable

5 meters long

3-Pole

AWM 2661

Yellow Jacket.

Protection: IP 68 / NEMA 6P. 1 Lb.

Learn More

LITTELFUSE - 814020 Circuit Breakers.

A circuit breaker is an automatically operated electrical device designed to protect an electrical circuit from damage caused by overload or short circuit. Unlike a fuse, a circuit breaker can be reset (either manually or automatically) to resume normal operation. Automatic units are cycling and continuously self resetting, while the manual units are used where investigation of the fault is required prior to the circuit being reset.

Push Button Manual Reset (type III) with 90° bracket

24V 20 Amp.

Operating temperature: -23°C to 65°C.

Case: metal housing/shielding small 2-screw terminals.

Dimensions: 1-1/4" long x 3/4" wide x 5/8" tall.

New Old Stock

Applications: Automotive, Commercial, Industrial, Trailor Lighting 

Learn More

LORD Mfg. - 204PHC18-100 – Vibration Isolation Platform Shock Mount 3". LORD Plateform Mounts provide effective isolation against vibration. The contour of the flexing element was developed to provide uniform stress distribution. This, plus high strength bonding and the use of specially compounded elastomers, provides maximum service life. LORD Plateform Mounts are easy to install and provide space efficiency. These rubber mounts are invaluable for isolating delicate components from shock and vibration. They also electrically insulate the component from the mounting surface. Heavy Duty Design Mount: 7/16 - 14 Diameter Threaded Mounting Through-Hole. Center-Center Mount Holes: 2.50” X 0.25” Diameter Material: Rubber and Steel 0.40”. Dimensions: Base 3" Square X 1.75” Height. Rubber Support 2.0” Diameter Alternate / Similar: 6008K7190 lb Additional Information: https://www.modusadvanced.com/hubfs/LORD-Catalog/LORD_Industrial_Catalog_PC7000.pdf Applications: Typical applications include electronic equipment, business machines, medical equipment and small pumps, engines and gen sets. New Old Stock Made in USA Learn More

LYN-TRON - ST9422-36 - ST6979KM312-0.187-36 Connector, D-Sub. Hardware kit only.

Screw Lock Assembly: 2 Standoffs, 4 Flat Washers, 2 Split Washers and two 4/40 Hex nuts.

One - 10 Piece Set.

Alternate: ST9422-36 / D20418-2 / 205817-1

Learn More

LITTELFUSE - 345701A - 03450701H - Fuse Holder

Type: Safe Shock

Mount: Panel Mount - 1 Pole

Fuse Holder, 345 Series Panel Mount Enclosed Fuse Holder, ''Shock-Safe''

Electrical Rating: 20Amp 600VAC

High Profile Screwdriver Head

Right Angle Bottom Terminal

Bottom Terminal is 1/4" Quick Connect

Contact MaTERIAL: bRASS, tIN pLATED

3AG Black Body.

Temperature: -40 C to 85 C

Accepts 3AG, 5 x 20mm, and 2AG fuse sizes

Red Screwdriver Slot Cap (Flush with Holder) with slotted cap, no retaining nut.

Note: 1/2" Plastic Hex Nut with flange Purchased Separately

Alternate 03450701H, 3453HS7-010

 

Learn More

Hybrid and Negative outputs, Amplifier and Preamplifier 30-Flatpack Gold Hermetically SealedLockheed Martin 6088576-1 Learn More

240VAC-coil DPDT 12A ENCLOSED RELAY WITH PUSH TO TEST & IND. LIGHT Learn More

MAGNECRAFT/S&D - 788XBXCM4L - Relay, 120VAC.

Status: Discontinued

RELAY ICE CUBE 

Contacts: DPDT-12A and Press-to-Test.

With Indicating LED.

Mech: Plug-in.

Learn More

Relay, TDR. DPDT-10Amp, 1 minute fixed. Apply 230V, DPDT relay kicks in, contacts transfer for one minute. Voltage must be removed and reapplied to reset the time delay. Mount: octal plug in. Learn More

MACROMATIC - SS50522-04 - Relay, Time delay

TDR 0.2-5 Seconds.

Supply: 120VAC/DC.

Output: DPDT-10A 8-pin octal plug-in.

Timing Range: 0.2 - 5 Seconds, via knob on top of unit.

Upon application of control power the relay contacts transfer and the preset time begins.

At the end of the preset time, the contacts return to their normal condition.

Power must be removed and reapplied to reset the time delay relay.

Genuine Macromatic - New Old Stock

Learn More

Connector, coax. RF male. Package of 10. Learn More

Lorch Electronics Corp - ES-353 - Electronic RF Switch -12V +5V The Lorch ES-343 Electronic Switch is a high-quality coaxial / RF switch designed for RF signal routing. Manufactured by Lorch Electronics Corp in the United States, this unit is a reliable and efficient solution for controlling and directing RF signals. The SMA F/M connectors ensure a secure and reliable connection for your RF testing and measurement needs. With a unit quantity of 1, this electronic switch model ES-353 is a versatile and essential tool for various industrial and business applications. Lorch Microwave is now a part of Smiths Interconnect. For over 30 years, Lorch Microwave has supplied microwave components and sub-systems to the electronics and communications industry. Type: Coaxial / RF Switch for RF Signal Routing Applications: Embedded Military Electronic, Signal Switching, Laboratory Work Voltage: +5V / -12V Frequency: RF Signal Electronic Switch -12V +5V Code Ident No. 29971 each with Serial Number Two (2) SMA Gold Plated Connectors Dimensions: 32mm x 64mm Note: SMA connectors are specifically designed for high-frequency applications and have a 50-ohm impedance. New Old Stock Made in USA Bulk Packaged bulk. Learn More

MAGNECRAFT Struthers Dunn - 229XAXC-12VDC Relay, Control.

Input: DC. General Purpose Relay

Contacts: SPDT.

Contact Ratings: 5Amp.

Coil Voltage: 12VDC (5A 250VAC, 32VDC).

Connections: 4 Pin DIP, PC Leads.

Mech Mtg: PCB.

Packaging: Plastic Enclosed.

Dimensions: 0.960" x 0.667" wide x 0.815" high.

Weight 2 oz.

New Old Stock

Made in Taiwan

Learn More

MAGNECRAFT/S&D - 181BXX116 - Hermetically Sealed

Silver Metal Enclosure

Dimensions: 1.5" x 1.4" x 2.4" with three threaded mounting studs.

DPST N.O 6VDC

Coil Resistance: 40-Ohm 

 Coil Current: 190 mA DC 

6-Solder-Hook terminals out thru bottom glass seal - 5.2-oz

New Old Stock

Learn More

LEDEX - 5945-636-5462 - B-61986-A - Rotary Solenoid Switch -Motor, Stepper with Switch/Return Spring.

Rotary Selector Features

Compact Design
High Torque to Size
Snap Action On/Off
Return Spring

Type: Base End Shaft, Ratcheting Rotary Solenoid

Supply: 48VDC.

Body Dimensions: 1.90"D x 2.74"H.

Mount: 3 Tapped holes

Weight: 12oz.

With Wafer Switch.

Additional Information: https://www.ermec.com/catalogos/2017/saia/Rotary%20DC%20Solenoids%20mm.pdf

Military NL-71277-3-2, B-61986-A

Made in USA

Learn More

LEMO - PCA.2S.302.CNLC82 Connector, cable.

8.2mm (cable) 14.7mmOD Plug.

Hermaphrodite-type: 1 Male pin and 1 Female socket. Size 2.

Swiss made. Additional Information: https://lemo.com/en/products/low-voltage-connector/b-connector

Learn More

LEM SA - HA10NP/SP5 Hall Effect transducer, open loop.

DC to 50kHz.

PC board mounting.

Galvanic isolation between two primary windings.

Pri nominal: Series: +/-5A Ipn Parallel:+/-10Amp.

Primary current measuring range: Series:0- +/-10A Ip

Parallel: 0 -+/-20A Ip.

Analogue output: +/-4V.

Load resistance:>4kohm.

RMS rated V: 500V.

Supply: +/-15V <20mA.

Specification Sheet Attached.

Dimensions: 19x15x21mmH.

Manuf in the UK.

Either unsoldered or prepped, so we are selling them as if used but guaranteed not DOA.

Learn More

Lamba Commercial LV Series Power supply. 12VDC 0.9Amp, switching. Output Adjustable 5% up or down. Input: 105-265VAC. 2% Regulation from No load to Full load. 64% Efficiency. No overshoot at turn on, turn off, or power failure.  0 C to 60 C Operating range. Overload Protection, Overvoltage Protection, Convection Cooling, Plated Steel chassis.

Open frame. Dimensions: 35 x 97 x 79.5mm. Weight: 250 grams. NIB. with Instruction sheet. UL and CSA Approved.

Why repair for $130-$150 when you can purchase a New Lambda Factory Replacement at fraction of that cost.

Learn More

Leviton - 13351 - Lampholders/Tombstones.

This Leviton T8 or T12 low profile lamp holder is for use with fluorescent lamps having a medium bi-pin base.

Non-shunted Bi-pin Lamp Holders/Tombstones.

Low Profile, Slide-On, Snap-On, or Bolt-On Mount. 

Quickwire 18AWG Solid or Str Tinned.

For T8 LED Replacement and all T8/T10/T12 Fluorescent lamps, 600V 660 watt.

Listed: UL/CSA.

UPC: 041175370918

Package of 2.

Learn More

24-Channels = 3 rows of 48 phone jacks on standard 19" rack panel only 1.75" tall. Removed from telephone comm cabinet. Excellent condition, precious metal contacts. Has 4 Amphenol 157-72500-3 50 pin jacks at rear. for 3/16" phone plugs Learn More

L-COM - CSMN9MF-5 -  Computer Related.

DB9 Female to DB9 Male Extension Cable.

Each End with Hood and Hold Down Screws.

Molded. Cable is 26-9C (26AWG 9 Conductor)

300V VW-1, AWM style 2464.

Length: 5 Foot. (1.5m)

Jacket: Grey

Operating Temperature: 80 Deg C.

RoHS Compliant.

New, Individually Packaged.

Alternate: Newark 28H8872, Allied 70126648

Applications: Communications & Networking, Test & Measurement, Power Management

Learn More

LICON – 16-114 w/ Actuator 76-1290 - Roller Switch, Limit & Manual Reset, DPST, 10A, 125/250VAC. ITW Licon Series 16 Snap Action Switch utilizes the Butterfly action for high integrity switching in a compact size. The series 16 Snap Action switch utilizes the Butterfly™ action for high integrity switching in a compact size. Using the Form Z switch circuitry, this switch can be used to control two circuits. Sub-Miniature 10A Double-Break Snap Action switch with Manual Reset. Switch mechanism utilizing a single spring element to provide lost motion. Status: Discontinued Contacts: DPST-DB. Contact Material: Silver Thermoplastic Case and Cover. Contact Ratings: 10A AC/DC, 125/250VAC. Actuator: 76-1290 Two Positions, Switch Roller Lever Maintained. Connections: Four End Solder Terminals. Mechanical: Riveted on Small Plate. Environment: IP40 Meets MIL-PRF-8805/7 Operating Design Life: Electrical – 100,000 Cycles, Mechanical 10,000,000 Cycles Body: 0.25" Width x 1.16" Length x <1.0"H. Temperature: -54C to 125 C (-65F to 275F) Note: Has an unusual mechanical reset once roller/lever is pushed and snaps. UL Recognized and CSA Certified. Applications: Industrial, Military, Aerospace Used / Removed from Equipment. Learn More

Lot of 10 - LEECRAFT - V C 25-212-1 - Midget Grooved or Flange Based Socket or Lamp Holder, T1-3/4 Status: Discontinued Midget Grooved Sockets also referred to as Midget Flange and/or Bottom Flanged Base Bulbs Socket with 6" wire leads for Midget Grooved based Lamps / Bulbs. Midget Grooved Base (S5.7s) Bulbs have a single contact on the bottom and a base diameter of 5.7 millimeters. Base: T-1 3/4 (6mm) S5.7s Base Power/ Voltage: 15W, 28V Material: Brass / Nickel-Plated Fits: 388 and similar Midget Grooved Bulbs such as Incandescent Bulbs: MG6, 7333, 336, 337, 379, 398 (5/6V) 386 (12/14V) 334, 388 (24/28V) and GF200-0UR-028B. Applications: Instrument Panel Indicators, Push-Button Switches, Accent Lighting, Decorative Lighting, Appliance Bulbs. These bulbs are sized to fit tight spaces such as signs, instruments, indicators, and flashlights. New Old Stock – Genuine Vintage Leecraft – Difficult Lamp / Bulb Socket to Find. Made in USA Learn More