Featured Products

Switch, top. For Illuminated switches (Actuator only).

Snap-in.

Dimensions: 18.5mm square x 11.2mm high.

Will set into switch with a square hole 12.6mm and 3.5mm deep.

Has two snap in tabs below inset area.

Learn More

Hardware, Dial Knob.

Shaft Diameter 1/4".

Shaft not Flush with Knob.

Dimensions: 7/8" wide x 1/2" high.

Color: Black.

Package of 4 pot knobs.

Learn More

Microphone Replacement Grille Ball Head Mesh Cover, Windscreen.

If you’ve ever spoken into a microphone before, you probably know to speak into the metal grille for the best results. Chanced are you’ve spoken into a handheld microphone with a spherical grille. Microphone grilles come in many shapes and sizes and have many purposes for microphone performance!

The windscreen attenuates wind noise and environment noise and provides ample protection.

Material: Metal, Heavy Screen.

Fits Many Brand Mic Accs

Audio, Microphone.

Head/Cover only with windscreen.

Dimensions: overall 1.734" D x 2.860" high.

Black lower 1/2 is actually 0.920" Long, Windscreen is actually 1.927" long.

Threaded ID 1.244" (31.6mm) Diameter at base.

Learn More

Hardware, spacers. Plastic, slotted for #10 screw. Dimensions: 0.319" OD x 9" long. Package of 4. Learn More

Unidentified MFG - 40824 - Hardware, Rubber Strain Relief Grommet / Boot.

Cable Glands - Cord Grip

Square (16mm) 0.636" x 0.630" x 0.247" with a 6mm hole, and 1.160" length behind top.

Material: Rubberized Plastic.

Color: Black.

Note: Cord Grip.

Learn More

Hardware, Knob. Silver Knob for Slide Control.

Fits Shaft: 0.189" (4.8mm) x 0.188" (4.7mm).

Dimensions: 5/8" square x 1/2" high.

Almost Perfectly Square.

Learn More

3.5mm (F) Jack 3-conductor, PCB mount RA 11.9mmW x 20.8D x 10mm above board - Min purchase per line item $.00 = 4/$1.00

Learn More

Keyboard Switch. Micro Reed & Magnet, Push Button Anti-Bounce Keyboard Switch. Normally Open. Snap-in Mounting. With straight slightly slanted X shaped top and partial cap with hole for LED and Clear Cover Top. Package of 4. Learn More

Switch, Slide.

Contacts: DP3T.

Mount: PCB

Mech: PCB, 8 pin. Body: 0.948" (24mm) long x 0.305" (7.7mm) wide x 0.343" (8.7mm) above board, plus seated actuator 0.562" (14.2mm) long.

New Old Stock

Learn More

Unidentified MFG - 3-327 Switch Blade, Leaf.

Contacts: Normally Closed.

Mech: 2 Mounting holes are 0.24" apart.

Body: Overall 2-1/2" long. Leaf is actually 1-11/16" long.

Leaf Width: .19" (4.8mm) wide.

Note: Precious tungsten contacts for high current capacity and long mechanical life.

Common end of stroke switch for electronic and electromechanical pinball machines. Normally closed EOS (end-of-stroke switch) used on various assemblies. 

Note: There are many different size leaf switches. Check dimensions and pictures throughly to confirm compatibility for your application.

Learn More

ASM - 3-285 -  Keyboard Switch, Pushbutton.

Contacts: NO.

Connection: PCB pins.

Body: 0.566" Square Recessed.

Note: Keyboard switch, accepts a Bi-pin lamp (not included), and will also require an actuator (no included).

Vintage New Old Stock - Rare

Learn More

Switch, slide. Mech: PCB. Body: Overall 12.0mm long x 6.5mm wide x 5.9mm high. Note: Semi-enclosed spring loaded slide switch. Miniature. Learn More

Switch, push. DPDT latching.

Panel Mount with two threaded holes 0.59" apart, plus four mounting pin bracket (removable) for PC board. 0.130" 3.3mm square plunger, no cap.

PCB Dip Tacttile Push Button

Latching switch with 6 Gold plated pins

Push ON / Push OFF.

A Quality Sealed Switch.

New Old Stock

Learn More

Switch, Slide.

Contacts: 2P3T.

Connection: 8 Heavy PC leads.

Mech: PCB. Body: 1.072" long x 0.366" wide x 0.849" high including contacts and frame.

Vertical Actuation

Chrome Plated Enclosure

High Quality Switch - Positive Click Positioning

Note: Knob not included.

New Old Stock

Learn More

Switch, pushbutton. Contacts: NO. Mech: PCB, round. Body: 0.472" D x 0.229" high. Note: Keyboard/tactile feedback switch. Color: off white.

Learn More

Switch, dip. Contacts: 4P. Actuator: slide. Mount: PCB. Package: 8 Dip. Package of 10. Learn More

Speaker, grill. Round spider web pattern. Size: 4-1/4" D, 3 mounting holes, triangle, 4-1/8" mt ctrs. Color: black. Learn More

Switch, Pad/Tape. Pressure Switch/Tape Switch NO (Normally Open) enclosed.

Overall Cord Length: 6 foot.

Single Ended.

Alternate: Similar to ST18 Tape Switch for WeaponLights

Learn More

18 PIN IN-LINE HEADER Learn More

HEADERS 18 PIN

Learn More

Switch, pushbutton. NC. Push center. Package: small round miniature. Dimenions: 7.6mm D with a 3.8mm center. Overall 16.2mm high. (Switch top/head is 4.9mm high). Contacts: tiny solder. Package of 10. Learn More

Unidentified MFG - 5349 - Switch, Pushbutton.

Contacts: SPDT.

Actuator: Illuminated (Red), Momentary.

Connection: Solder Lugs.

Mech: Panel, Snap-in.

Body: Rectangular.

Snap-in panel = 1.650" to 1.700" long x 0.858" wide x 1.709" deep (behind panel).

Front Bezel 1.695" Long x 0.938" Wide.

Learn More

Normally Closed REED Switch

Black Heat Sink Tubing Housing and White Wire Leads.

Learn More

Connector, header. Male 36 position, inline. Pitch: 0.1". Dimensions: 3.6" long, 0.09" one side and 0.3" leads opposite side. Learn More