Featured Products

Snap-In Metal Hole/Panel Plug.

Solid Brass hole plug creates a professional and finished appearance in a variety of applications. Formable tapered prongs snap into the hole to securely hold them in place.

Overall Head Diameter: 0.665", Depth 0.280" 

Eight (8) Prongs can be Reformed

Plug for Approximately 0.50" up to 0.562" Diameter Holes.

Material: Bright Brass.

Material Thickness: 1/32" to 1/16"

Sometime referred to as Idiot Plug

New Old Stock - Proudly Made in USA

Alternate: D3161B

Applications: Electrical, Medical, Automotive, Marine, Instrumentation, Decorative.

Learn More

Telephone access box with (12) 4 Pin Modular Phone Jacks (Mod Packs) to a 50 Pin Male Centronics Connector.

Learn More

Attractive Wall Plate. For Speed Control. Cover Exposed Wires, Material: Aluminum. Mount: 2 Holes with 3-5/16" Centers. Dimensions: 4" x 2" Wide. Applications: Fan Speed Control, Fireplace Blowers, Industrial. Learn More

8 COND.PHONE PLUG W/ 7'-4 COND STRANDED CABLE AND ONLY 4 WIRE'S USED/PRE-PACKAGED(SATIN SILVER STANDARD 102859030) Learn More

Vintage Jewel Lamp Lens.

Dimensions: 0.338" OD.

Slides into base 0.28" D.

Color: White.

Package of 5.

Learn More

Nielsen Hardware - 112-11 -Series Chest Handle - Steel Formed Grip Chest Handle with Retun Spring.

Nielson's most popular chest handle. These are used regularly for tack and other wooden box applications. The bail stops at 90° when lifting and incorporates two return springs to assure that the bail returns to the recessed position.

Recessed Handle, Spring Loaded.

Pull-Up-To-Grasp.

Material: Steel, Chrome Plated.

Mount: 3 holes with 2-1/16" centers.

Steel Formed Contoured Handle for comfort

Dimensions: Mount Plate 5.00" Long x 3.64" High x 0.564" Depth.

Weight: Over 10 Ounces Each

Perfect for Large Heavy Tool Chest, Commercial Speaker Cabinets, Flight Cases, Heavy Tool Cases or other application requiring a strond durable handle.

Made in USA - New Old Stock

Alternate: Chineese Alternate Replacement HA1121STCZ130, Part #:32855892

 

Learn More

ATX - ACU-1- Indoor Twin Lead Antenna Matching Transformer, FM/VHF/UHF Balum Splitter

• Converts television terminal connection to F-type connector
• 75-300-Ohm Impedance Matching Balun
• Frequency 5~900 MHz UHF-VHF-FM
• Suitable for Indoor Applications
• 3-Capacitor Circuitry
• Insertion Loss 1-2 dB typical
• Return Loss 16 dB min
• DC Power Blocking
• Firmly Staked F-Connector to Housing
• Machined Brass F Connector Port
• Shielded Housing

75 Ohm oax to 300 Ohm Twin Lead.

Mini Matching Transformer.

Alternate: Archer 15-1140A

Quality - New Old Stock - Made in Taiwan

Learn More

Connector, header. Housing gender: plug. Contact gender: male. Circuit count: 26 (13 x 2 rows). Mounting type: PCB. Pin spacing: 2.54mm. Outside dimensions: 32.6mm long x 5.1mm wide. Overall 13.6mm high including both sides. Note: Square pins. Side 1: approximately 3.3mm long. Side 2: approximately 7.9mm long (with a working surface of 6.9mm long). Learn More

Lamps & Lights. Panel Indicator Red, 3V on a 5" Wire with a 2.4mm Male Plug. Lamps & Lights, Panel Indicator Illumination Color: Red Voltage: 3 VDC Connection: 5" Wire with 2.4mm Stress Relief Plug. Application: Instrumentation Indicator New Old Stock Made in USA. Learn More

Hammond Equipment Chassis Handles.

Status: Discontinued

Offset Round Handle

Black Anodized Aluminum.

Approx 4-3/4" long (offset), stands 1.25" off panel with 4-9/16" ctrs.

10/32 Threaded Hole Pull Handle

Package of 2.

Learn More

Cable Assemblies, Audio.

DC plug, 5.0mm OD and 2.5mm ID RA, on a 2 conductor, 6' power cord.

Package of 2.

Learn More

Connector, terminal strip. Wire markers only. A-W for terminals strips. Material: plastic, black. Dimensions: 1-1/2" wide x 9-1/2" long. Learn More

8 WAY TAP 5-600 MHZ 11DB. FOR VIDEO ( F CON. ) 3.25" x 2.75" x 1"HIGH Learn More

Hardware, Extension Spring with Hook Ends.

As you stretch an extension spring, it gets harder to pull. Minimum load is the amount of force required to start to extend the spring. Maximum load is the amount of force required to fully extend the spring. Rate is the amount of force required for every inch or mm of extension.

Dimensions: 1" OD x 12" (1 Foot) long.

Steel wire: 0.943"OD.

New Old Stock

Alternate: 9640K144

Learn More

Fan, accessories. Mesh finger guards for computer cooling fans. Very flexible 2-1/4" square x 1/4" thick, 2-5/8" mt ctrs. Learn More

Basic 4 conductor wall mount phone/jack prewired assembly, with 8 and 4 hidden contacts. Complete with wiring instructions. Dimensions: 7-5/8" x 3-5/16" x 7/8" deep. Learn More

Hardware. Shoulder / Insulating Spacer / Washer

Shoulder washers, sleeve bushings or flanged bushings are designed for a variety of applications. A shoulder washer insulates a screw, rivet or wire from a chassis or assembly. ... The flange on the bushing is used to positively locate the bushing when it is installed or to provide a thrust bearing surface.

Shoulder Washers are designed to provide electric and heat insulation in assemblies where this is a crucial requirement. These products are self-lubricating and corrosion- and abrasion-resistant.

Size: # 8 Screws,

Dimensions: 0.560" OD  x 0.170" ID x 0.260" Overall Thickness

Material: Hard Fiber, Nylon

Max. Temperature: 230F

Package of 40.

 

Learn More

Hardware, Bakelite knob. For test equipment or variable resistors/variac(s). Material: bakelite. Dimensions: 2.33" (60mm) D, threaded ID for 1/2" stud. One set screw required, not included. Color: black.

Learn More

Computer Serial Port Cable/RS232.

DB25 Male to Female Cables are commonly used for serial peripheral devices like keyboards, mice, joysticks, printers, scanners, and many other devices. With thumbscrews provide you with a quick and easy connection. DB25 Male to Female cable is wired with a standard straight through pinout. This cable can be used as an extension cable.

• Connector A: DB25 Male
• Connector B: DB25 Female
• Add your RS-232 serial peripherals to a switchbox
• Fully molded connectors
• Includes Thumbscrews
• All lines wired straight through

DB 25 Male to DB 25 Female

Heavy Duty  Commercial Computer Extension Cable,

Length: 5' 6".

Learn More

Vintage Phenolic Bakelite Connector, Tie Point/Turret/Connection Board/Terminal/Wiring Strip.

5 Position Dual Row Turret Board

10 Terminals, Double Row of 5 each Turret Board.

Phenolic/Bakelite Fiber Board is 0.100" Thick.

Mount: Chassis Mount

Heavy Duty Turrets are Non-Magnet (Suspect Nickel Plated Brass)

Two 0.150" Diameter Mounting Holes Approximately 1.375" Apart

Dimensions: 2.36" Long x 1.14" Wide x0.46 High.

Vintage - New Old Stock - Bulk Packaged

Proudly Made in USA

Alternate/Similar Compoents: Keystone 15106, 15441, 15111

Applications: Repair / Restoration of Vintage Radio, HIFI, Amplifiers. Project Boards or Electronics Test Equipment.

 

 

 

Learn More

Hardware, Knob. For snap-on 1/4" half flattened or "D Shaped" Shaft.

No set screw.

Material: Plastic, black.

With indent Finger Touch Control.

Dimensions: 1-1/4" Diameter x 5/8" High.

Vintage - New Old Stock

Learn More

Connector Socket.

Type: Banana Plug Socket.

Housing Gender: plug.

With Mounting/Retention  Nut

Color: Black.

Note: Tips are pre-tinned.

Vintage New Old Stock

Learn More

Connector, coaxial. BNC. Housing gender: receptacle. Contact gender: female **T**. Circuit count: 3. Learn More

Connector, Gender Changer - Video Adapter.

Convert your VGA monitor to use with your Macintosh(R) computer. This adapter provides you with a straight-pinned connection between your HD15 (VGA) port and the standard DB15 used with Apple(R) systems. This molded adapter is compatible up to a resolution of 640 x 480 pixels.

C2G Mac DB15 Male to VGA HD15 Female Adapter

VGA Adapter - DB-15 (Male) to HD-15 (Female) VGA/SVGA

Color: Black Molded

Adapter Type	VGA
Connector on First End	1 x 15-pin HD-15 Female
Connector on Second End	1 x 15-pin DB-15 Male

Alternates: Item#:  7087627, Model#: 02902

New Old Stock.

Learn More