Featured Products

Switch, pushbutton. Actuator only. For illuminated switches. Various colors.

Learn More

Connector, IC Socket. 16 Pin Dip

Each with one 0.1uF axial capacitor attached, soldered to Pin one and Pin 16.

Low profile, Solder Tail PC pins.

Learn More

T8 Torx Bits Stamped T8, 1/4" Bit

Torx is a brand name trademark for fastener heads and keys that have a six-point, star-like pattern. One of the beauties of Torx sizes is that they are universal, meaning there is not an SAE vs Metric version. They are all the same.

High resistant to wear and tear for a long tool life

Impact resistant modified chrome-vanadium-molybdenum

Tool Steel, Hardened

Imperial Point to Point: 0.90" (2.31mm)

Suitable for all applications Hardness HRC 59-61

Suitable for both manual & machine applications

Made in USA

Learn More

Magnets. 1" x 1-1/2" D. Learn More

Heavy Duty Hardware,  1/4" vinyl over Steel coated Cable Clamps.

Vinyl coated loom clamps are the go-to protection from loom, wire, and cable runs. Each vinyl coated loom clamp is created with a molded vinyl coat that acts as a cushion to further assist in reducing vibration. These clamps are ideal for general wire fastening applications, such as fastening wire harnesses, hydraulic hoses, and cables.

Material: Vinyl Over Steel.

Adjustable 1-1/4".

Mount: 0.51" slot.

Package of 5.

Learn More

Cable Clamps. 1 7/8" Vinyl Coated Steel Clamp. 

Vinyl coated loom clamps are the go-to protection from loom, wire, and cable runs. Each vinyl coated loom clamp is created with a molded vinyl coat that acts as a cushion to further assist in reducing vibration. These clamps are ideal for general wire fastening applications, such as fastening wire harnesses, hydraulic hoses, and cables.

Diameter: 1 7/8".

Material: Vinyl Over Steel.

Mount: one hole slot.

Learn More

Cable Clamps. 5/8" Vinyl Coated Steel Clamp. 

Vinyl coated loom clamps are the go-to protection from loom, wire, and cable runs. Each vinyl coated loom clamp is created with a molded vinyl coat that acts as a cushion to further assist in reducing vibration. These clamps are ideal for general wire fastening applications, such as fastening wire harnesses, hydraulic hoses, and cables.

Diameter: 5/8".

Material: Vinyl Over Steel.

Mount: 0.34" slot.

Package of 10.

Learn More

Hardware, cable clamps.

Avoid tripping hazards by keeping all your cords and wires organized with a cable clamp.

Size: 5/8".

Material: Vinyl over steel.

Mount: 0.35" slot. Package of 10.

Learn More

Cable Clamps. 9/16"  Vinyl Coated Steel Clamp. 

Vinyl coated loom clamps are the go-to protection from loom, wire, and cable runs. Each vinyl coated loom clamp is created with a molded vinyl coat that acts as a cushion to further assist in reducing vibration. These clamps are ideal for general wire fastening applications, such as fastening wire harnesses, hydraulic hoses, and cables.

Diameter: 9/16"

Material: Vinyl Over Steel.

Mount: 1/4" slot.

Alternate: 542.02916, 924695-2, 917962-1

Package of 10. 

Learn More

Enclosure, Junction Box Adapter SCS1-i to RJ12.

Telephone Junction Box with a 50 Pin Male Centronics (50) SCSI-1 to (Eight) RJ12 6 pin phone jacks.

Learn More

Hardware, Terminal Strip Insulator / Insulation.

For Terminal Strips 8" Long x 1-3/4" Wide.

Material: Fibre

Package of 10.

Learn More

12' F TO F CABLE Learn More

8-767 Piezo Sounders. 

Piezoelectric Sounders / Buzzers are sound components prepared by incorporating a piezoelectric vibration plate in a case (resonator).

Buzzer transducers with feedback connection.

Dimensions: 1.36" OD x 0.6mm thick.

Package of 4.

Learn More

8-764 Lamps & Lights. Holder, Mini Screw Base.

• 100% Brand New and High Quality
• Miniature Lamp Holder (E10 Type)
• Plastic base with two screw terminal, Dual Mounting Holes
• The bulb holder is a sturdy unit with mountings that allow for easy connection to electrical circuits.

Surface Mount.

Socket: E10 Miniature Screw.

Miniature Edison Screw (MES), C6

Base Major Diameter (Thread External): 10 mm (0.394")  

For lamps; #406, GE#243, etc.

Dimensions: 35mm Diameter.

Color: Black.

Learn More

Connector, Shunt. Package of 60.

Jumper 2 position.

Males & Females.

Material: Thermoplastic.

Note: Mini.

Note: Misc package of 60 Pieces, various sizes.

Used/Removed from equipment.

Learn More

20 PIN (M) PC MT IDC CONN Learn More

6 PIN DIN (Female) Chassis / PanelMount Jack.

Mount: 2 Mounting Ears

Material: ABS Thermoplastic

Connection: Solder

New Old Stock

Learn More

Connector, Relay Socket

Compatible with numerous R10 Series Relays.

4PDT. (4 Pole Ice Cubes)

Style: Ice Cube.

Material: Nylon

Mount: Staggered PCB, PC Pins.

Note: Will fit R10 Series 4PDT Series Relays.

New Old Stock

Similar/Alternates: 2-1393143-5, 27E213

Learn More

Video equipment. 300 Ohm twinlead - 75 Ohm push on antenna adapter. Package of 5. Learn More

Hardware, knob. For 1/4" shaft. Snap on. Knurled. Metal collett. Material: plastic, black. Dimensions: 1.277" D x 0.767" high. No set screws. Learn More

Hardware. Pull String for Ceiling Lights and/or Ceiling Fans.

Length: 34" Braided String

Chain Connect on One End, Bell Style Brass Pull on Other.

Alternate: Midwest Fastener 64633, SATCO 90/1034, Jandorf 60313

Vintage - New Old Stock

Package of 10.

Learn More

C-Cell Battery Bay or Charging Holder for Six C Size Batteries

Battery Holder, for Six "C" Cells.

Configuration: 1.5 VDC  X 6 Batterys in Series = 9 VDC

Batteries are securely clamped in place by the holder.

Dimensions: 2.25" x 6.25"L.

Color: Black

Connections: With  Two Wire (Red & Black) 8" leads & Connector.

Made in Taiwan

Applications: Widely used in the toy, lamp, other projects or use as a perfect external power source

Learn More

Hardware, brush. Nylon. Body: approximately 1.5" long, plus black bristles 5/8" long. Disposable. For gluing, painting or other projects. Package of 25. Learn More

IVORY wall plate for 2 x 4 box with a hole for a 1/4" hole for a jack or cable. Learn More