On Sale

COOPER BUSSMAN - JP60030-3CR Fuse Holder.

For three Class J

Ratings: 30Amp 600V fuses.

60C/75C wire.

IR: 200K Amp.

UL LIsted, CSA Certified

Learn More

EATON - COOPER BUSSMANN - CHM3D - Fuse, Holder.

The CH range of modular fuse holders is designed to accommodate European domestic and industrial fuse links. Products meet the requirements of IEC60269 and 60947-3 as well as complying with the requirements of NF & UNE standards.

Status: Discontinued

3 Pole 30Amp 600V.

Series CHM.

For Midget Fuses

Use 75 Deg CU 9Copper) wire only

Wire Range: 8-18AWG.

Material: Tough and Durable Polymide Body

Torque: 18 to 22 lb.in.

Mount: Snap Mounted Din Rail.

Dimensions: 2.122" wide x 2.430" (overall) deep x 3.082" high.

"Finger Safe" to an IP20 grade of protection under IEC Standards

Listed: UL, CSA, CE.

UPC 30051712501447

 

Learn More

Cooper/Bussman - HDJ-A - Circuit Protection.

Status: Discontinued

Fuse holder.

For 20Amp 32V, 1/4" x 1-1/4" fuses.

Accepts #18 - #20 wire.

Note: Four part unit, top, bottom, spring and rivet.

Fuses and lead wire purchased separately.

New.

Learn More

MS-043 - Hardware, Speed Nut / Retaining Ring.

Also known as flat-style speed nuts, these have a large surface to distribute loads better than standard and flanged external push rings. Use them on unhardened shafts that are softer than the push ring. The ring bites into the metal to form an interference grip. Spring nut provides the correct amount of spring tension without damaging surfaces. Eliminates the need for lockwashers and spanners. For use with threaded screws and studs. Reusable. Nut surface accepts paint without clogging.

Threaded Fasteners for Holding Products/Items Approximately 0.25" in panels (1/4").

IE: Lamps, Miniature Jacks, etc.

Dimensions: 0.625" Long x 0.437" Wide. (5/8" X 7/16")

ID is 0.261" x 0.282".

Propertise: Magnetic,Spring Steel

Package of 50.

Alternate: 90528A12

New Old Stock

 

Learn More

Motorola - 1N3491 Diode.

Ratings; 25Amp 50V.

Package: DO-21 / one lead.

Case is cathode.

Note: Silicon.

Military NSN 5961-00-727-3966.

New.

Learn More

TE connectivity - AMP INC - SOCKET005 - 1-1571552-0 - Connector, IC socket. 28 Dip, wide.

Connector, IC socket. 28 Dip, wide.

Low Profile. ST.

Pitch: 2.54mm

Dual Leaf Contect

Material: Thermoplastic, UL94 V-O, Black.

New Old Stock

Learn More

WARD LEONARD - RWR75W0.067 - Resistor, Ceramic.

Resistance: 0.067 Ohm.

Power: 75 watt.

Ribbed.

Technology: Wirewound.

Enamel coated.

Dimemsions: 0.767" D x 3.5" long.

Radial Lug.

Learn More

Resistor, ceramic. Resistance: 2 Ohm. Power: 125 watt. Ribbed. Technology: wirewound. Enamel coated. Dimensions: 0..811" D x 5" long. Radial lug with screws. Learn More

Resistor, ceramic. Resistance: 10 Ohm. Power: 125 watt. Ribbed. Technology: wirewound. Enamel coated. Dimensions: 0.811" D x 5" long. Radial lug. Learn More

Resistor, ceramic. Resistance: 5 Ohm. Power: 110 watt. Ribbed. Adjustable with slider. Technology: wirewound. Enamel coated. Dimensions: 0.780" D x 4.5" long. Radial lug. Learn More

Resistor, ceramic. Resistance: 10 Ohm. Power: 110 watt. Ribbed. Technology: wirewound. Enamel coated. Dimensions: 0.780" D x 4.5" long. Radial lug. Learn More

Resistor, ceramic. Resistance: 0.04 Ohm. Power: 110 watt. Ribbed. Technology: wirewound. Enamel coated. Dimensions: 0.784" D x 4-7/16" long. Radial lug. Learn More

Resistor, ceramic. Resistance: 0.04 Ohm. Power: 110 watt. Ribbed. Technology: wirewound. Enamel coated. Dimensions: 1" D x 4" long. Radial lug. Learn More

Resistor, ceramic. Resistance: 0.132 Ohm. Power: 50 watt. Ribbed. Technology: wirewound. Enamel coated. Dimensions: 0.796" D x 3.5" long. Overall with hardware 5-5/16" long x 2" wide x 2" high. Radial lugs with screws. Complete with mount feet. Note: Marked 77869-S. Learn More

Resistor, ceramic. Resistance: 2.5 Ohm. Power: 125 watt. Tapped. Ribbed. Technology: wirewound. Enamel coated. Dimensions: 0.951" D x 7.75" long. Contacts: stranded coiled wire leads. Note: Tapped at 1.5, 2 and 2.5 Ohm. Learn More

E-tec Interconnect - TOS-508-S118-95 - IC Sockets, TO-99-8 Pin, Machined Gold Contact For more than 45 years E-tec Interconnect designs, develops, manufactures standard & custom connectors on a Worldwide basis for Highest Reliability Medical, Military, Industrial and Audio Applications. Connector, IC Sockets, High Reliability, Highest quality machine socket for the Best Audio ICs. • Machined Pins: Unlike standard, cheaper stamped-pin sockets, machined-pin sockets feature cylindrical, high-precision contacts that provide a more reliable and secure connection. • Gold Contacts: Gold plating is used for superior conductivity and resistance to corrosion, which is crucial for long-term reliability and performance, particularly in sensitive applications. Trust TO-99 IC to Gold Contacts, not lead and tin. (Standard for 8 Pin LM741 Metal Can Op-Amps) Machined pin male side and female side. Index tab for alignment of Pin 1. 8 Pin Metal Can Round for TO-99, Low Profile The pins are arranged on a circle with a diameter of approximately 0.200 inches (5.08 mm). Heat Resistant Body Machined Pins, Gold Contact Inlays. Contact Material: Beryllium Copper (BeCu) Contact Plating: Gold over Nickel Gold Plated Beryllium Copper for superior conductivity and corrosion resistance. Mounting: Through Hole Features: Closed Frame Highest Quality - All Surfaces Gold Plated – Embedded Terminals - 4 Finger Clips Housing Material: PBT (Polybutylene Terephthalate) UL94V-0 Operating Temperature: -55°C ~ 125°C Current Rating: 1 Amps /100V Color: Black. Made for Picker International / Marconi Medical Systems – Philips – Medical X-Ray Equipment P/N 402-027 Genuine E-tec Interconnect AG – No Counterfeit – No China – No Delays – No Dissapouinments Made in Switzerland New Old Stock - Legacy Component Gold Plating was much thicker Note: Same Footprint but different heights for TO-5-8, TO-78, TO-79, TO-80 Alternates: Augat 8058-1G49, Mill Max 917-43-108-41-005000 Applications: Used for integrating Transistor Arrays, ICs, and other components in High-Fidelity Audio, Military, Aerospace, and Medical Devices. Learn More

TELEMECANIQUE - XUE-H307534 - Photoelectric Sensor Receiver.

Status: Discontinued

Photoelectric Receiver

Through Beam: 30m

Voltage: 12 - 48v with protection against reverse.

Switching Capacity: </= 200mA with Overload and Short Circuit Protection.

Protection: IP 67

Operating Temperature: -25 C to 70 C

Connections: Screw Terminals

Max. Switch Frequency: 30 Hz

Note: Used / Removed from Equipment. 

Approvals: CE, CSA, UL

XUE-H307534 is replaced by XUXOAKSAM12

Learn More

NEC Corporation - PS2502-2 IC, Transistor.

PS2502-2 is an optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington connected phototransistor.

Status: Discontinued

High Isolation Voltage Darlington Transistor type Multi Photocoupler series.

Package: 8 Dip.

Alternates: PC835, TLP523-2

Applications:  Power Supply, Telephone/FAX, FA/OA Equipment, Programmable Logic Controller

Learn More

Catalyst - CAT22C12P-30 IC,SRAM. Non-Volatile (NVRAMs) Static Ram.

Status: Discontinued.

10k store cycles.

Number of words=256.

Bits per word=4.

t(acc) Max. (S)=300n.

tW Min (S)=300n.

Output config=3-state

Nom supp (V)=5.0.

Genuine Catalyst - New Old Stock - Rare

Case: 18 Dip. 

Learn More

Ward Leonard / Ohmite - RWF175W1 – D1J16WL – Power Resistor, Ceramic. 1 Ohm 175W, New. The Ward Leonard RWF175W1 – D1J16WL Power Resistor is a high-quality ceramic resistor with a power rating of 175W and a tolerance rating of ±1%. This power wirewound resistor features a lug termination style and comes packaged in a box. Made in the United States, this unit has an item length of 8.5" and a diameter of 1.275 inches. Perfect for electrical equipment and industrial applications, this resistor offers reliable performance and durability for your electronic components and semiconductors. Ohmite owns D1J16wlWard Leonard Resistance: 1 Ohm 5%. Power: 175 Watt. Type: Tubular Ceramic Power Resistor, D Vitrohm Enamel Technology: Wirewound. Max Temp: 300 C Max Voltage: 4,210 VRMS Mount Methods: Push-In Spring Clips or Through Bolt Connection: Lug Terminal Flame Resistant Coating All Welded Construction Dimensions: 1.275" Diameter (max) x 8.5" Long. Alternates/Equivalents: Ohmite L175J1ROE, Stackpole EWT175KB1R00, Vishay NHL17507Z1R000JJ Radial Lug with Brass Connection Hardware. Note: Marked D1J16WL. Applications: A 1 ohm 175 watt power resistor can be used in a variety of applications where a combination of high power dissipation and low resistance such as Dynamic Braking, Load Testing, Voltage Regulation, Power Distribution and Audio Equipment. New Old Stock in Manufactures Box. Made in USA Learn More

Eaton Bussmann - HPC - Midget Fuse Holder. Rated 600V, 30A, Panel Mount, New

Series: HPC

Screw Type Knob

Package: Bulk

Part Status: Active

Mounting Type: Panel Mount

Fuse Size: 0.394" Dia x 1.496" L (10mm x 38mm) (13/32" x 1 1/2")

Current Rating (Amps): 30 A

For Use With/Related Products: Class CC Fuses, 13/32" x 1-1/2"

Compatible Fuse Series AGU, ATM, ATQ, BAF, BLF, BLN, FLM, FLQ, FNM, FNQ, GGU, HC10S, KLK, KLKD, KLM, KTK, OTM, TRM, Series HPS, Nonindicating, Nonrejection, Fuse Cap Style

Fuse Type: Cartridge, Midget

Temperature: -40 C to 150 C

Fuseholder Type: Holder

Number of Circuits: 1

Voltage: 600V

Termination Style: Solder, Quick Connect - 0.250" (6.3mm)

Alternate: UPC 051712719629

New Old Stock

UL Approved

Learn More

Eaton Bussmann - HPS - Midget Fuse Holder, Rated 600V, 30A, Panel Mount, New

Series: HPS

Bayonet Type Knob

Package: Bulk

Part Status: Active

Mounting Type: Panel Mount

Fuse Size: 0.394" Dia x 1.496" L (10mm x 38mm) (13/32" x 1 1/2")

Current Rating (Amps): 30 A

For Use With/Related Products: Class CC Fuses, 13/32" x 1-1/2"

Fuse Type: Cartridge, Midget

Fuseholder Type: Holder

Number of Circuits: 1

Voltage: 600V

Termination Style: Solder, Quick Connect - 0.250" (6.3mm)

Alternate: UPC 051712740357, Newark 94F2236, Mouser 504-HPS-10

Learn More

TE Connectivity - SCHRACK - CAD14A10/12 Relay, Control.

Status: Discontinued

Input: AC.

Contacts: 3PDT.

Contact Ratings: 10Amp.

Coil Voltage: 12VAC.

Connections: 11 Octal.

Mech Mtg: PCB or Panel, plug in.

Packaging: Transparent case.

Note: KRPA-style.

Equivalent NTE R02-14A10-12.

Approvals: UL, CSA

New Old Stock 

Made in Austria

Learn More

LITTELFUSE - 571 Series Fuse Holder, LN.

Amperage Rating: 30Amp

Voltage Rating: 600V.

Dielectric Strength: 4000 V Minimum

Flamability: UL94 V-0

Molded Parts: Black Thermoplastic

Mount: Panel 1/4" QC Terminals.

Approvals: UL Recognized, CSA Certified

Terminal Never Soldered, 1/4" Quick Connect Terminal

Note: Excellent Like New Condition - Removed from Equipment.

Comes with BLS5 or BLS7 Fuse

Alternate: Bussmann HPF-RR

Proudly Made in USA

Learn More