On Sale

EDWARDS SIGNALING PRODUCTS - 349 Hardware, Enclosure.

The 349 is a weatherproof Mounting Box is perfect for mounting a variety of Edwards signaling appliances such as bells, horns and sirens. It is made from die-cast aluminum and finished at the factory with a baked sage gray enamel finish.

• Rugged Die-Cast aluminum

• Tapped for 3/4" (19 mm) conduit

• Molded neoprene gasket

• Corrosion resistant finish.

Back Mounting Box.

Construction: Rugged Die-Cast Aluminum 

For Edwards Signaling 340 6" or 10" Adaptahorns.

Color: Gray.

Size 6-1/2 Inch Diameter X 1-5/8 Inch Width

Applications: Fits 6”, & 10” 340, 435, 439D, 5520 Series Bells, Duotronic horn/siren

UL Listed for outdoor use.

More info: http://www.edwards-signals.com/index.cfm?pid=185

UPC: 782640242001

Alternate: Newark 92F6379

Learn More

Cutler-Hammer / Eaton - 8906K4919 Switch, Toggle., Lock Lever. Environmental Sealed, Resistant to Dust, Dirt, Spray Extreme Temperatures Contacts: SPDT. Contact Ratings: 15A 125VAC. Temperature Range: -85°F to +160°F (-65°C to +71°C) Life: 20,000 operations at rated load 40,000 operations mechanical life Requires 0.47" diameter hole to mount, 15-32 Bushing 32 Thread Actuator: Momentary-both-sides, Must Pull-to-switch One side only. Center-Off. Lever Lock with Lever Seal. Connection: Screw Terminals with black dress nut, washer, nut and locating ring. Aircraft-Instrument Military-Purpose Style. (Pull-to-switch On) / Off / (On). Learn More

BOURNS - 4310R-102-105F Resistor, Network.

Resistance: 1Meg Ohm.

Power: 1.25 watt.

Tolerance: 1%. Isolated.

Package: 10 Sip.

Package of 10.

Learn More

AMPHENOL - 842-812-6022-134 Connectors, IDC.

IDC Cable mounting,.

Series:812 with 60 Contacts.

1A 125VAC carrying Capacity.

Gender: Female

Contact Plating: Gold

Pitch: 2.54mm

Termination: IDT

Female 60 pin socket for ribbon cable. 0.010 x 0.010" contact spacing terminates to 0.050" [1.27mm] flat ribbon cable (#26-stranded or #30-solid.).

Gender polarization and open end covers for feed-through and daisy-chain applications.

Contact Material:30-micron Gold-plated Copper contacts.

UL CSA RoHS Approved.

Learn More

3M - 3666-0002 Connector, PCB Card Edge, Pak 100.

Housing Gender: Receptacle.

Contact Gender: Female.

26 & 20 AWG

Current: 1 Map

Mount: Flange Mount

Circuit count: 30 Position (2 Row) / 60 Contacts.

Pin spacing: 0.1".

Outside dimensions: 3.5" long x 0.433" wide.

Overall 4.390" long with 3.891" mount centers.

Note: Edge card to ribbon cable.

More info: http://multimedia.3m.com/mws/mediawebserver?mwsId=66666UF6EVsSyXTt4Xf6Lxz6EVtQEVs6EVs6EVs6E666666--&fn=ts0011.pdf&fn=ts0011.pdf

Learn More

WIMA - MPX21W3150FH00 - MP3-X2 0.15/275VAC RFI Capacitor.

˜ Particularly high reliability against active and passive flammability
˜ Excellent self-healing as well as high voltage strength
˜ High degree of interference suppression due to good attenuation and low ESR
˜ For temperatures up to +110° C
˜ According to RoHS 2011/65/EU

0.15uf 275VAC.

Tolerance: 20%.

Material: Metalized Paper Polypropylene Film.

Package: Radial Leads.

Dimensions: 28mm Long x 8.0mm Wide x 20mm High.

Lead spacing: 22.5mm.

Note: Also marked 40/110/56/C.

Learn More

IDT - IDT7164L15TP IC, Memory. Standard SRAM.

Status: Discontinued

CMOS SRAM 64K (8K x 8-Bit), 15ns.

Case: 28 DIP.  0.300 INCH, PLASTIC.

Genuine IDT - New Old Stock - Rare

Learn More

CHROMALOX - MF3300058V224A Heating Element, Immersion.

High Watt Density 

Power: 120V 3000W.

Mounting: Top Mouting Plate 2-1/2"sq.

Element is 10-1/2" Long.

Alternate: 8-935, TG1303L.

Applications: Injection Molding Machine and Coffee Maker Heater Element.

Learn More

CHROMALOX - 393-115472-013 3471P Heater Coil.

Power: 240V 750 watt.

Curved (36" overall) into a 7 x 3 x 3" space.

Note: TI-38X982 0C-260-4981, Asbestos Covered Leads.

Applications: Coffee Maker Heater

Learn More

NIC COMPONENTS CORP - NCD470M500VNPO - Capacitor, Ceramic Disc.

47pF 500V DC.

Tolerance: 20%.

NPO Disc.

Package: Radial Leads.

Package of 50.

Note: High Voltage.

Alternates: Vishay VY1470K31Y5SQ63V0, JAMECO Valuepro DC47TR, AVX 5AQ470KODAM, Cornell Dubilier GM470K

 

Learn More

NIC COMPONENTS CORP - NCD390J100VNPO - Capacitor, Ceramic Disc. 

39pF 100V DC.

Tolerance: 5%.

NPO Disc.

Package: Radial Leads.

Package of 50.

Note: Low Voltage.

Alternates: Vishay S182K33Y5PN63L7R, BC Components D390G25COGH63L2

Learn More

Memcor - AR-100 25K - Resistor, Ceramic.

Resistance: 25K Ohm.

Power: 100 watt.

Adjustable with slider.

Technology: wirewound.

Enamel coated.

Dimensions: 0.811" D x 6.5" long.

Radial solder lug.

Note: Alt P/N: AR100-25000. NIB.

Learn More

8-764 Lamps & Lights. Holder, Mini Screw Base.

• 100% Brand New and High Quality
• Miniature Lamp Holder (E10 Type)
• Plastic base with two screw terminal, Dual Mounting Holes
• The bulb holder is a sturdy unit with mountings that allow for easy connection to electrical circuits.

Surface Mount.

Socket: E10 Miniature Screw.

Miniature Edison Screw (MES), C6

Base Major Diameter (Thread External): 10 mm (0.394")  

For lamps; #406, GE#243, etc.

Dimensions: 35mm Diameter.

Color: Black.

Learn More

SOLITRON - 47A528192-P1 - 2780-6005 -  Microwave Device.

Solitron Device, Inc. is a company that is into designing and manufacturing of high performance, high density, high power components and circuitry.

Female Threaded Contact.

Contact: Gold Turret Pin.

Alternate: 2780-6005, SCR002-0056 

Proudly Made in USA

Learn More

SIGNETICS - SD306 Transistor, DMOS FET.

Max voltage: 20VDS.

Max current: 50mA.

Dissipation: 300mW.

Package: TO-72 Gold Leads.

New. 

Application: For use with VHF, TV.

Note: Double-diffused inputs. Diode protected gates.

Alternate: 2SK194 

Learn More

TE Connectivity Potter & Brumfield - R40-E2-W2-V800 Relays, DC.

Slimline Flatpack Upright Silver-Cadmium Oxide Gold-Flashed Contacts.

Coil Voltage: 24VDC

Contacts: DPDT

Contact Rating: 7.5A

Coil Resistance: 800-Ohm.

Mount: PCB.

Case: Wash Tight (RTIII) Tape Sealed Plastic Case

Dimensions: 0.45" x 1.40" x 1.2" High.

Slimline Flatpack Upright Silver-Cadmium Oxide Gold-Flashed Contacts.

Weight: 1oz.

NSN 5945-01-167-4733

Proudly Made in USA

Learn More

PANDUIT - PLP1.51-M Hardware, Cable Ties.

Grouping and organized your electrical wires has never been this easy with this convenient PLP1.5I-M cable tie from Panduit. This cable tie has a temperature range of -40 °C to 85 °C. This product comes packaged in bulk, so the parts will be stored loosely. This product is 6 mm tall.

Status: Discontinued

Style: Standard Locking with Push Mount

6-1/8" long (156mm).

Bundle diameter: 1-1/4" (32mm).

Tensile Strength: 178 N Minimum 

For panel thickness up to 0.093" (2.4mm).

Max. Bundle Diameter:  32 mm

Operating Temp.: -60 to 85 C

Material: Nylon 6/6.

Color: Natural.

Standards Met  UL Recognized (File #E56854), UL 62275 Compliant (Type 1, 11), RoHS Complaint

Package of 50.

Learn More

NIC COMPONENTS CORP - NCD270J1KVNPO Capacitor, Ceramic Disc.

27pF 1KV DC.

Tolerance: 5%.

NPO Disc.

Package: Radial Leads.

Lead spacing: 5.5mm.

Package of 50.

Note: High Voltage.

Learn More

Resistor, ceramic. Resistance: 6K Ohm. Power: 100 watt. Adjustable with slider. Technology: wirewound. Enamel coated. Dimensions: 0.810" D x 6.5" long. Radial lug. Note: Type AR-100. Complete with mount feet. Learn More

Resistor, ceramic. Resistance: 60K Ohm. Power: 100 watt. Adjustable with slider. Technology: wirewound. Enamel coated. Dimensions: 0.810" D x 6.5" long. Radial lug. Note: Type AR-100. Complete with mount feet. Learn More

Resistor, ceramic. Resistance: 2.5K Ohm. Power: 100 watt. Adjustable with slider. Technology: wirewound. Enamel coated. Dimensions: 0.810" D x 6.5" long. Radial lug. Note: Type AR-100. Complete with mount feet. Learn More

CORCOM - 6H1-F1809 - FILTER EMI 6A 250V Multipurpose Power Line RFI Filter for Emission Control. Current/Voltage Ratings: 6A 250V 50/60 HZ Inductance: 2X460UH Capacitance: 0.01uF Temperature: 0 C to 75 C Overall Dimensions: 2.5” Width X 1.875” Height X 0.65” Depth Body Dimensions: 1.75” x 0.9” X 0.65” Bolt Center: 2.125” Used, Removed from New Equipment Alternates: TE Connectivity 6VSB1, 6VS1, 6EH3 Made in Mexico Learn More

BIRD - 5-1357-3 Connector, Electronic Solder Eyelet, Rivet/Eyelet/Terminal.

Electronic eyelets are flanged tubular metal conductors inserted into a printed circuit board. They make electrical continuity between the circuitry on both sides of the board, and are an attachment point for soldering component leads.

Type: Solder.

Appears to be Silver Plated Brass (High thermal and electrical conductivity)

Metric Dimensions: Outside lip is 6.1mm OD, 2.9mm ID with a shaft 3.5mm round and 6.7mm tall under Lip.

Inch Dimensions: Outside lip is 0.240" OD, 0.114" ID with a shaft 0.138" round and 0.264" tall under Lip.

Applications: Secure High Current Electrical and Ground Connections or repairs to chassis and PWBs.

Chose the proper eyelet keeping the following in mind:
LUF The length of the eyelet barrel under the flange should be 0.020-0.035”/0.630-0.890mm greater than the thickness of PCB(this allows the for the right length after the flange is formed)
ID Eyelet inside diameter should be 0.003-0.020”/0.075-0.500mm greater than the component lead diameter for proper fit of  the eyelet through-hole component lead.
FD The flange diameter should be sized so that it does not protrude out onto other pads or conductors in the vicinity
OD The clearance in the PCB hole should allow the eyelet to be inserted without undue force but, but should not exceed 0.125mm greater than the eyelet outside diameter.

Additional Information: http://www.intl-eyelets.com/short_course_on_electronic_eyelets.htm

Genuine Vintage Bird Electronics Hardware - New Old Stock

Package of 100.

Learn More

AMPHENOL - 97-3057-10 Connector, Circular, 97 Series.

Cable Clamp MS3057A Type For jacketed cable or wires protected by tubing.

Both clamping halves float for maximum
strain relief.

Learn More