On Sale

CTS - SM-C-135045-2 Potentiometer.

Resistance: 1K Ohm.

Mount: Panel. Dimensions: 18.7mm D x 8.4mm high.

Threaded bushing: 8.6mm long (seated).

Shaft: 1/8" D half-flattened x 9.1mm long.

Learn More

Arco Electric - Aero Snap RC7-102T Switch, micro, pushbutton.

Contacts: SPST NC.

Contact Ratings: 10Amp 125VAC, 5Amp 250VAC.

Connection: screw terminals.

Mech: Panel, with 2 holes at 1" (25.4mm) centers.

Panel hole: 1.945" (49.4mm) long x 0.691" (17.5mm) wide x 0.820" (20.8mm) high.

Note: Arco-snap.

Learn More

HOBART TRANSFORMERS - PD-6805A Transformer,

Ideal for dual DC power supplied, controls and instrumentation

Two Primaries: each rated at 115VAC and 50/60 Hz

Two Secondaries, each rated 34VCT @ 0.5A

Series and Parallel connections of the paired windings allow for 115 or 230 VAC input and 34VCT @ 1A or 68VCT @ 0.5A.Primaries are numbered 1-2 and 3-4;

Secondaries are numbered 5-6-7 and 8-9-10. Winding polarities run in ascending numerical winding order.

Connect 2-3 to input 230VAC between 1 and 4 or 1-3 and 2-4 to input 115VAC.

Likewise, connect 7-8 to output 68VCT between 5 and 10. and 5-8, 6-9 and 7-10 to output 34VCT.

Dimensions: 3 1/8" X 3 1/4" x 2 3/4"

UL Recongnition - UL-1446

Weight 1.7 lbs.

Learn More

CRL Centralab - 1346405 Linear Taper Potentiometer with SPST Switch

2Meg Ohm Rotary Potentiometer with SPST switch.

Contact Ratings: 3Amp 125VAC / 1Amp 250VAC.

Dimensions: 23.9mm D x 16.6mm high.

Overall with terminals: 30.9mm D.

3/8" Thread and mounting hole.

Contacts: Solder Terminals.

Mount: Panel Mount

Shaft: Slotted Split & Straight Spline/Knurled Shaft

Construction: Threaded Collar, Phenolic Wafer, Metal Housing

Dimension: Bushing length 7.7mm long. Shaft 1/4" Slotted, 15.5mm long.

Underwriters Laboratories Approved

Genuine Vintage Centralab - Rare New Old Stock

Part marking "1346405" Decodes to Manufactured by Centralab (134- EIA code) the fifth week of 1964 (Date code 6405).

Applications: Common to some Guitar Amplifiers.

Proudly Made in USA

Learn More

Honeywell Clarostat - CM44725 Industrial Linear Taper Potentiometer with SPST Switch 

Resistance: 500K Ohm.

Current Rating: 1 Amp 250VAC, 3 Amp 125VAC.

Tolerance: 10%

Power Rating: 2 watt

Package: Panel Mount.

Termination: Solder 

Shaft: 1/4" x 3/8" Long, Round.

Bushing Thread: 3/8" - 32 NEF

High Quality Brass Bushing 

Voltage Rating: 500 V

Mount: Panel

Rotational Life: 25,000 Cycles

Switch is OFF in the usual all the way CCW rotation like the usual ON/OFF Function.

Applications: Guitar and amplifier pots. Audio Taper suitable for both Volume & Tone controls. 

New Old Stock

Proudly Made in USA

 

Learn More

Honeywell Clarostat - V388-5K Potentiometer.

Resistance: 5K Ohm.

Power: 1/2Watt.

Tolerance: +/-10%.

Mount: Panel.

Package: Molded housing, 3 gold leads.

Dimension: square 13.5mm wide x 11.5mm above board x 13.0mm deep.

Threaded shaft 9.1mm.

Overall 31.0mm long.

Learn More

Honeywell Clarostat - 73JA500R Potentiometer. 500 Ohm.

Power: 2 watt.

Tolerance: 5%.

Package: PC lugs. WW 10 turn, linear.

Adjustment type: Knob,

Operating temperature range: -40C to +120C, linear 0.25%.

RoHS yes.

Learn More

Honeywell CLarostat - RV6NAYSA104C Potentiometer.

Resistance: 100K Ohm.

Power: 0.5 watt. Mount: PCB or panel.

Dimensions: 12.9mm D x 9.5mm high.

Threaded bushing 6.9mm long (seated 9.0mm long). Shaft: 1/8" (3.3mm) D slotted x 9.0mm long.

Contacts: 3 solder hook terminals.

Housing: Metal.

Learn More

Honeywell Clarostat - RA30NAFK153A Potentiometer, linear.

Resistance: 15K Ohm.

Power: 4 watt.

Single turn.

Technology: wirewound.

Nickel-plated brass flattened shaft 2.5" long overall with bushing 0.426" long.

Dimensions: 1-11/16" D x 0.765" high.

Termination: solder.

Made in the USA.

Learn More

Honeywell Clarostat - CM42789 Industrial Linear Potentiometer with SPST Switch.

Resistance: 10 Ohm 

Power: 2 Watt

Termination: Solder Terminals.

Mount: Panel Mount with Threaded bushing.

Running Torque: 6.00 Inch Ounces

Dimensions: Overall 1.122" D x 0.928" high.

Shaft Length: 0.875"

NSN: 5905-01-258-9093

Learn More

Honeywell Clarostat - RV4NAYSB504A Potentiometer, Linear.

Resistance: 500K Ohm.

Power: 2 watt.

Tolerance: 10%.

Technology: carbon element.

Dimension: 1.090" (27.6mm) D x 14.4mm high.

Note: Standard bushing, 11.2mm long. Slotted short shaft, 1/2" long.

Screwdriver adjustable.

Solder terminals.

Note: Type J. Linear.

NSN 5904-00-542-8058

Learn More

Honeywell Clarostat - RA30NAFK352A Potentiometer, linear.

Resistance: 3.5K Ohm.

Power: 4 watt. Single turn.

Technology: Wirewound.

Nickel-plated brass flattened shaft 2.5" long overall with bushing 0.426" long.

Dimensions: 1-11/16" D x 0.765" high.

Termination: Solder.

Genuine Clarostat - New Old Stock

Proudly Made in the USA.

Learn More

CLAROSTAT - 140-7205 16700 Potentiometer.

Resistance: 50 Ohm.

Power: approximately 1.5 watt. With 1 NO and 1 NC switches.

Mount: Panel/chassis. Dimensions: 29mm D x 23.5mm high.

Threaded bushing 6.3mm long.

Shaft: 1/4" D (1/2 flat) x 11.9mm long.

Learn More

Burr Brown - 3652JG - Used/Socket pulls 

IC. Optically Coupled Linear Isolation Amplifiers.

Package: 19-cdip in a 32 Pin pkg, Gold Leads.

An optical isolation operational amplifier designed to measure electrical current in the 10⁻¹¹–10⁻⁶ A range at ±1000 V.

 

Learn More

Carlingswitch - DB101-PBB Switch, Paddle.

Contacts: SPDT.

Contact Ratings: 125VAC/10Amp 1/2HP, 250VAC/5Amp.

Actuator: Plastic, black. Mech: Panel.

Body: 0.858" wide x 0.495" deep behind panel.

Panel hole: Overall: 1.002" wide x 0.584" wide.

Bushing length: 0.286" long. Paddle length: 0.686" long.

Contacts: (3) 1/4" male quick connect terminals.

Note: Listed: CSA. 

Learn More

Burr Brown - 3652JG

IC. Optically Coupled Linear Isolation Amplifiers.

Package: 19-cdip in a 32 Pin pkg, Gold Leads.

An optical isolation operational amplifier designed to measure electrical current in the 10⁻¹¹–10⁻⁶ A range at ±1000 V.

Learn More

Silicon General/Microsemi - SG1526J/883B,  NSN 5962-01-148-3373

0.2A SWITCHING DC CONTROLLER, IC Reg buck/Flyback, 350kHz SWITCHING FREQ-MAX, Step-down - Step-up  

IC, High Reliability Isolated Switching Regulator, Regulating Pulse Width Modulator. Package: CDIP18, test dots.

Note: Military cage No. 34333. Used/Perfect socket pulls.

The SG1526 is a high performance monolithic pulse width modulator circuit designed for fixed-frequency switching regulators and other power control applications. Included in an 18-pin dual-in-line package are a temperature compensated voltage reference, sawtooth oscillator, error amplifier, pulse width modulator, pulse metering and steering logic, and two low impedance power drivers. Also included are protective features such as soft-start and under-voltage lockout, digital current limiting, double pulse inhibit, a data latch for single pulse metering, adjustable dead-time, and provision for symmetry correction inputs. For ease of interface, all digital control ports are TTL and B-series CMOS compatible. Active LOW logic design allows wired-OR connections for maximum flexibility. This versatile device can be used to implement single-ended or push-pull switching regulators of either polarity, both transformer-less and transformer coupled. The SG1526 is characterized for operation over the full military ambient junction temperature range of -55°C to +150°C. The SG2526 is characterized for operation from -25°C to +150°C, and the SG3526 is characterized for operation from 0°C to +125°C.

Features

• 8 to 35 volt operation
• 5V reference trimmed to ±1%
• 1Hz to 350KHz oscillator range
• Dual 100mA source/sink outputs
• Digital current limiting
• Double pulse suppression
• Programmable dead-time
• Under-voltage lockout
• Single pulse metering
• Programmable soft-start
• Wide current limit common mode range
• TTL/CMOS compatible logic ports
• Symmetry correction capability

Learn More

TE Connectivity / Potter & Brumfield - KHP-17A12-120

Relay, control. Input: AC. Contacts: 4PDT. Contact Ratings: 3Amp. Coil Voltage: 120VAC 50/60Hz. Connections: solder. Mech Mtg: PCB. Packaging: Plastic enclosed, nylon dust cover. KHP-17A12-120VAC

Supplier:TE Connectivity / P&B Brand

Part No:KHP-17A12-120

HTS:8536410020

Relay Construction:Non-Latching

AC Coil Voltage:120 V

Contact Arrangement:4PDT

Maximum Current Rating:5 A

Mounting:Socket

Termination Style:Solder

Led Indicator:No

Operating Temperature:-45 to 70 °C

Coil Resistance: 3.9 KOhm

Made in USA - New Old Stock

Learn More

KEPCO/TDK - RCW24-16K - P/S. 24VDC 16Amp

Power Supply.

Input: 100V-240V 5.6A-2.8Amp 50-60Hz.

Output: 24VDC 16Amp 384W max.

Mount: Panel/chassis.

Dimensions: 5-1/8" wide x 4-5/16" high x 8-3/4" deep. (Overall 10-1/4" deep, including front terminal strips).

Note: Double marked with Alt P/N: RCW350W-K.

RCW Modules availability limited to factory stocks and no longer manufactured

Alternate, Replacements, Superseding Models: AK350-24, AK450-24, AK650-24, AE800-24, RTW24-13KC

Learn More

CP Clare & Co. - HGRM52112S05 Relay Mercury Wetted Contacts Reed Relay, SPDT 100VA, 3V Coil.

Relay, Mercury Hg.

Form: C,  Bistable

Contacts: SPDT.

Contact Ratings: 100VA.

Coil Winding: Bifilar.

Coil Voltage: 3 V Typical, 5 V Max.

Coil Resistance: 26 Ohm.

Current: 5 Amps

Switching Frequency: 200 Hz

Operating Temperature: -38 C to 85 C

Mech Mtg: PCB, Unshielded.

Size: 1.61x 0.565 x 0.435" high.

Weight: 15 Grams

Note: Mercury Wetted. Signaaling.

UL Recognized, CSA certification, FCC68 Compatible

Learn More

Motorola - 1N4733A - Diode, Zener.

5.1V 1 watt.

Tolerance: 5%.

Case: DO-41 Axial Leads,

Note: Leads are cut and formed (See Picture).

Leads are 6.6mm each side.

Package of  50.

Learn More

Microsemi - 1N4689

Diode, zener. 5.1V 500mW.

Package: DO-204AH, DO-35 Axial Leads.

Tolerance +/- 5%

Reverse Current Leakage @ Vr - 10UA @ 3v

Operating Temperature -65 C - 175 C

Through Hole

Silicon epitaxial planar.

Learn More

Line Electric - MKD3D-12 - Relay, Power. 3PDT 5Amp 12VDC, New. The MKD3D relay is a power relay typically used for general-purpose switching in industrial and electronic applications, featuring a 3PDT (Triple Pole Double Throw) contact configuration. It is commonly used to control multiple independent circuits with a single low-power signal. Open Frame Power Relay, Power. Input: DC. Configuration: 3PDT (3 Form C), providing three sets of normally open and normally closed contacts. A "3 Form C" relay contains three independent, identical sets of these Changeover (CO) contacts, allowing one coil to control three separate, isolated circuits simultaneously. Contacts: 3PDT. Contact Material: Silver Contact Ratings: 5Amp. Coil Voltage: 12VDC. Coil Resistance: 124 Ohms Duty Cycle: Continuous Connections: 3/16" (0.187”) Male Quick Connect (QC) Terminals. Operating Temperature: -45 C to 85 C Mechanical Life: 10,000,000 Cycles Mech Mtg: PCB or Panel with 6-32 Threaded Bore on Coil Side. Approximate Dimensions: 1.8” Height x 1.25” Width x 1.3” Depth Similar: KA14DY-12VDC Made in USA Applications: • Automation Systems: Frequently used in industrial control cabinets to automate circuit switching and protection. • Equipment Protection: Helps protect devices by isolating low-power control signals from high-power loads, preventing overloads. • Complex Wiring: The 3PDT configuration allows for the simplification of complex wiring by switching up to three different circuits simultaneously. • Control Systems: Widely used in remote control, communication, and mechatronics as an intermediate control component. Learn More

Honeywell/Microswitch - V7-4A39E9 - Snap Action SPST

Honeywell’s MICRO SWITCH V7 miniature switches are designed for long term-reliability in a rugged switch packaged with a thermoplastic housing.

Status: Discontinued

Type: Switch, Miniature Pin Plunger.

Momentary 

Contacts: SPST Normally Closed.

Contact Ratings: 5 Amp 125, 250, 277VAC (1/10HP 250VAC).

Connection: 1/4" Male QC terminals.

Mech: Panel. Panel hole: 28.9 mm long x 9.9mm wide x 15.9mm high with 24.4mm centers.

Note: Very Sensitive, Operating Force .25N or 0.9oz max.

Alternates: Honeywell V7-4A33E9-000-2, Omron V-15-3B6-K, V-15G-1B6K, V7-1C33E9

Applications: These switches may be installed in a wide range of applications from simple or precision on/off limits, presence/absence sensing, or embedded in pressure or temperature assemblies.

Learn More