On Sale

Honeywell/Microswitch - V7-4A39E9 - Snap Action SPST

Honeywell’s MICRO SWITCH V7 miniature switches are designed for long term-reliability in a rugged switch packaged with a thermoplastic housing.

Status: Discontinued

Type: Switch, Miniature Pin Plunger.

Momentary 

Contacts: SPST Normally Closed.

Contact Ratings: 5 Amp 125, 250, 277VAC (1/10HP 250VAC).

Connection: 1/4" Male QC terminals.

Mech: Panel. Panel hole: 28.9 mm long x 9.9mm wide x 15.9mm high with 24.4mm centers.

Note: Very Sensitive, Operating Force .25N or 0.9oz max.

Alternates: Honeywell V7-4A33E9-000-2, Omron V-15-3B6-K, V-15G-1B6K, V7-1C33E9

Applications: These switches may be installed in a wide range of applications from simple or precision on/off limits, presence/absence sensing, or embedded in pressure or temperature assemblies.

Learn More

CP CLARE & Co. - HGSR-51111-T01

Relay, mercury. Coil: 24VDC 2600 Ohm.

Connection: 6 pin.

Electrical conf: SPDT.

Mech: PCB. Merccury Wetted Contacts.

Alt P/N: R-HG6.

 

 

Learn More

CP Clare & Co. - HGJ2MT54211P02 - Relay Mercury Wetted Contacts

Relay, Mercury Hg.

Contacts: DPDT.

Contact Ratings: 100VA.

Coil Voltage: 24VDC.

Coil Resistance: 1400 Ohm.

Mech Mtg: PCB, shielded.

Size: 1.6 x 1.0 x 0.4" high.

Weight: 0.8 oz.

Note: Mercury Wetted. High sensitivity. Singe-sided stable, 1mS response.

Learn More

CADDOCK - 1776-C541 Resistor.

The exceptional performance of this extensive family of Type 1776 Precision Decade Resistor Voltage Dividers has been achieved through the special combination of advantages provided by Caddock's Tetrinox® resistance films. This advanced film resistor technology provides the performance characteristics required by the precision input signal circuits of both bench-type and laboratory digital instruments.

Caddock's Decade Voltage Dividers offer small size, low cost and are commonly used in high-accuracy, precision analog metering designs. 

Precision Decade Voltage Divider.

Resistance tolerance +/- 0.1%

Voltage: 750V.

Temperature coefficient 25 ppm/C

Resistance values: 900K Ohm, 90K Ohm, 9K Ohm, 1K Ohm.

Package: 5 Pin SIP

RoHS Compliant

Alternate P/N 21J7886

Learn More

I/O Relay MODULE 5-24VDC OUT With 3-Position Center Off switch & LEDMade in the USA Learn More

Western Electric - WE327F RELAY Dual-Coil PCB-Mount Shielded

Telephone Use

SPST-NO 6-PIN

Weight: 1.3oz

Dimensions:1.9" x 0.64" x 0.6" high

Metal enclosure

Appears to have two coils 600-OHM & 80-OHM

Learn More

18-32VDC DPDT 1/2-crystal can Miniature Coax Relay 700-OhmHermetically Sealed - Presoldered with 6- teflon coaxial leads 7" long0.42 x 0.8" x 1.27"L with terminations Learn More

Volvo - 86K5843, Fits Volvo and others

ENGINE BLOCK HEATER - CSA LR-1843 Series-A 1500W 120-VAC 4.8"LOA

Learn More

WABASH - 726-209-19 Relay, Reed.

Input: DC.

Contacts: SPDT Latching, Dual Coil.

Coil Voltage: 5VDC 0.4mA or 12VDC 8.5mA.

Coil Resistance: 1.4K Ohm (dual).

Connections: 6 PC lead.

Mech Mtg: PCB.

Packaging: Enclosed.

Dimensions: 31.8mm long x 14.4mm wide x 9.6mm high.

Note: Magnetic Latch.

Genuine Vintage Wabash - New Old Stock

Learn More

WABASH - 1389-1-1 J5 HYBRID (REED RELAY)

120VAC-10A

5VDC IN

Learn More

55VDC COIL - 8PST-(6 N.O. & 2 N.C. @ 6A) RFE/PULLS GOOD CONDITION Learn More

Time Delay Relay 125VDC 0.7 - 7 Second Factory new Agastat Learn More

TDR TIME DELAY ON OPERATE - Coil: 120VAC - FIXED 30 SEC CONTACT RATINGS: 10A 240VAC 1/3 HP 120VAC/277VAC TYCO P/N 7-1393137-0 OBSOLETE Learn More

TURCK - RSM RKM 57-0.5M/S630 - POWER CABLE

5 PIN POWER CABLE FOR TURCK SOLID STATE MODULE

• Cables that meet the requirements of the ODVA
• PLTC rated cable
• Available in thin, mid, and thick styles
• 7/8 and M12 connectors
• Rated up to 9 Amps and 600 Volts
• IP67/IP69K rated

Learn More

TRIRIDGE - 103-400-12M - High Current Reed Relay, 12VDC 4PST, New The TRIRIDGE - 103-400-12M High Current Reed Relay is a vintage new product designed for industrial and electrical applications. This shielded relay operates on 12VDC with 4 poles and single throw, making it ideal for high current switching tasks. Manufactured by Triridge, this reed relay offers reliable and efficient performance in various settings where precise switching is required. A relay consisting of an energizing coil and a metallic reed switch mechanism. The reeds serve as both core and contacts, which are not hinged or pivoted and which move by flexure when acted upon by a magnetic field induced by energization of the coil. It may also include a biasing magnet. The biasing magnet, either aids or opposes the movement of the reeds and the opening or closing of the contacts. Axial lead epoxy molded reed relays have solid wires on each end. Status: Discontinued Vintage Voltage: 12VDC Coil Resistance: 225 Ohm Current: 60mA Shielded High Current Reed Relay Connection: Gold Plated Right Angle Leads Operating Temperature: -40 C to 85 C Vintage Genuine Triridge – Rare – Difficult Component to find. Made in USA New Old Stock Additional Information: https://sst.semiconductor-digest.com/2014/10/the-mystery-of-reed-relays-understanding-specifications/ Learn More

Relay. Mounting: 10 dip PCB. Learn More

PULLS J431D-12 TO-5 RELAY 1 FORM C SPDT C&F 1/4" GOLD LEADS Learn More

Red test pushbutton, H / A selector switch and Current Adjustment pot protected behind flip-up plastic cover on front panel. Blue Reset/Stop pushbutton on front panel. Learn More

26VDC DPDT Relay TO-5/9 RFE/Used 1/2" cut leads very good condition Learn More

DPDT 12VDC (probably) Hermetically sealed - NEW - 0.46" x 0.36" x 0.27" with 0.7" long gold leads Learn More

48VDC 36PDT Magnetic latching relays. Enclosed Precious metal contacts - New Pulse to latch, pulse in opposite polarity to unlatch. Learn More

48VDC 24PDT magnetic latching relays. Two Coils 115-ohms each - NEWEnclosed Precious metal contacts - NEW Pulse to latch, pulse in opposite polarity to unlatch. Learn More

J422-26WP TO-5/10-Lead DPDT RELAY NEW Learn More

TAKAMISAWA - NA12W-K Relay

12VDC DPDT-2A

1028-Ohm

8-Dip PCB mount miniature relays

New

Learn More